I have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?
i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?
If the purchases are all from the same account then you can share the content by authorizing each device.
If you have separate accounts then you have to be authorized to use the content purchased from another account.
MJ
Similar Messages
-
Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?
Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton -
I have a Macbook Air and the start up disk is full so it will not boot up. How can I boot it up so I can delete some files?
You will have to see about booting it from another drive or USB flash drive or another computer. When you are able to then see the following:
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
I set up my new air and now want to transfer my info from my macbook pro and I seem to have missed the boat and want to go back and do it . the computers are in different names with diff. passwords. Any idea?
If you set yp the Air before transfer, look in Users or Accounts pref pane to see if the other user is there to login to.
-
I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.
you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.
-
I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available
Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT -
I have a Macbook Pro and have just purchased a GSP hidden objects game. It says on the box that it is compatible and when I try and install it it tells me that installation has been successful. However, it then says that PowerPC games not supported. Help?
No game icon appears on my desktop and I don't know what I can do.
Really ****** off as i've not played these games since switching from a windows PC to a Mac and was really excited!! All I want is to be able to play my new game that arrived in the post today. If anyone can help I would be really really grateful....
The game says that it needs Mac OS X 10.3 or higher to run so I don't understand what the problem is or how I can fix it!!beckyj3,
the last version of Mac OS X which supported running PowerPC apps on Intel Macs was Mac OS X 10.6.8 (Snow Leopard). If you’d like to play this PowerPC game on your Intel MacBook Pro, then you’ll need to install Snow Leopard on it and boot into Snow Leopard. (Note that the last MacBook Pro which natively supported Snow Leopard was the Early 2011 model.)
The game was almost certainly published before Mac OS X 10.7 (Lion) was released, so back then, all versions of “Mac OS X 10.3 or higher” would have supported running that PowerPC game. -
I just ordered a macbook air today and need to know if the 128gb SSD is enough space. I presently have a macbook pro and am using only 30gb hard drive space so, the apple rep said 128 is enough as I do not load much pictures or gaming etc. Also is i5 ok.
Id choose the I5 yes, depends on what your usage is going to be,
....your question about "128 gig being enough" begs the question for IDEALIZED USE of your macbook AIr
In the case of a Macbook Air with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
*Generally, unless you NEED the data at least once every few weeks or once a month,...it really does'nt NEED to be on the SSD of your Macbook Air.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.
Ive got more APPS than any human should have on my 128gig AIR,..(50 or so),....and 10gig of working data, important files etc etc.
Still have 82gig available....... the entire point is that someone shouldnt consider the Air a "storage device" for tons of pics, music, vids, etc.
*Never consider any computer a data storage device at any time under any circumstance, rather a data creation, sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake that will, without fail, strike.
For needs of packing around a LOT of "big data" with your Air in its case..., get a nice 1TB HD for $70, or even a 2TB drive not much bigger.
Perfect 2TB HD, very slim, the "little giant" made by Toshiba (have several of these) $119
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST external HD available that money can buy:
$75
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
http://www.amazon.com/HGST-Touro-Mobile-External-HTOLMX3NA10001ABB/dp/B0062FZ2WS /ref=sr_1_1?s=electronics&ie=UTF8&qid=1379185002&sr=1-1&keywords=hitachi+extern a l+hard+drive -
I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge
I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge. I read it may be the charger,
that sometimes is blank, but it does charge my computer.
Anything I can try?
I have updated to 10.9.2
Message was edited by: wplewisBring it back to the Apple store with your MBP and charger. If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
Ciao. -
I have a Macbook PRO and it stopped booting up. When I turn power on it just stays in white screen.
I have a Macbook PRO and it stopped booting up. When I turn power on it just stays in white screen. I have not dropped it anything. Please help.
Try holding alt when booting to select your hard drive to boot into, if that fails, do it again but select the "recovery" partition (If you have Lion or Mountain Lion)
-
hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?
You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
hello,i have a macbook pro and i just recently downloaded facetime, and now i cant use it, it says An internal FaceTime error occurred,i dont know how to fix it, please help.
If your webcam is powered by USB, make sure it is attached directly to your Mac and not a USB hub. In my case, I had my Rocketfish webcam attached to a peripheral USB hub and it wasn't drawing enough power to operate at capacity. Therefore, Facetime was quitting on me and giving me that exact error message. Once I attached the webcam directly to my Mac USB port, problem solved. Hope that helps.
-
I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
I have a Macbook pro and I've lost my ical and widget icons. It says it's in the trash but I can't find it.
Hey Shady K,
It sounds like you've removed the iCal and Widget icons from your dock and want to get the back there for easy access. The following document goes over dock basics and there's a section (which I copied below) that goes over how to get those icons back on to the dock. Essentially you'll just find the application's icon in your applications folder and drag it back.
Mac Basics: The Dock
http://support.apple.com/kb/HT2474
Adding and removing Dock items
If you want to add an application to the Dock, click the Launchpad icon in the Dock and drag the application icon to the Dock; the icons in the Dock will move aside to make room for the new one. If you want to add a file or folder to the Dock, just drag its icon from any Finder window (or the desktop) and drop it on the Dock. The resulting icon that appears in the Dock is actually an alias of the original item (it's kind of a pointer to your original item). If you drag an application or file onto the Dock, you'll be able to open it anytime by simply clicking its docked icon. If you drag a folder onto the Dock, a Finder window of the folder's contents will display when you click the folder icon in the Dock.
To remove an item from the Dock, drag its icon an inch or more off the Dock and wait a couple seconds, then release; the icon will disappear in a poof of smoke. There are some icons that you can't remove from the Dock, such as the Trash and the Finder.
Don't worry, you aren't permanently removing the item from your computer; you simply got rid of its Dock icon. If you want that item back in the Dock, locate the application, file, or folder in the Finder (or with Spotlight), and drag it back into the Dock.
Hope that helps,
David -
I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?
Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.
Maybe you are looking for
-
How can I remove the moon phases from iCal?
I need to remove ALL the moon phases that appear in iCal 5.0.3. Every time iCloud updates it sends 6 to 10 moon events to my MacBook Pro. Going forward 3 0r 4 months, there are too many moon phases. How can I remove the moon phases from iCal? I am on
-
I tried to update my iPad 2 with the iOS 6.0. Now I am stuck in restore mode. I get "unknown" errors 3014 and sometimes -1. Any ideas?
-
Exception while connecting to Content server from JDeveloper
I am getting following exception while connecting from jDeveloper java.lang.NullPointerException at oracle.stellent.wcm.jdev.shared.connection.ConnectionContext.<init>(ConnectionContext.java:53) at oracle.stellent.wcm.jdev.features.rescat.I
-
SSL Provider showing no sockets
Hi Experts, I am facing the following issue: I am trying to setup SSL on a new system but when trying to apply the certificate to the 5xx01 port I am not seeing any sockets in the Visual Admin under SSL Provider --> Dispatcher 1234 --> Active / New S
-
Had a major problem and had to reinstall OSX. Now seems like all is working fine. How do I get rid of the old system with out losing any of my files.