I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over.

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over. Every time I try to record it says I don't have a open channel.

Is there some reason you have not updated PPro 5.0 to the latest version?
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
More hardware information might let someone answer your question... such as brand/model microphone
-Information FAQ http://forums.adobe.com/message/4200840
-Effective questions http://forums.adobe.com/thread/416679
-How to get help quickly http://forums.adobe.com/thread/419406

Similar Messages

Unable to connect my I-phone 4S via wifi from the Air-port express even though the signal is good and all my other devices (macBook air and speakers) are working properly? Already tried to change the channels on the Airport but still nothing.

Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?

Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?

AVCHD blown highlights in AE and Premiere Pro CS6

Hi Guys,
I have the NEX 5n and Premiere Pro CS6 on Windows 7 Workstation.
It seems as if Premiere is geting the 0-255 16-235 Levels kind of wrong. AVCHD files of all kinds have clipped highlights when exposure on the NEX or any other camcorder is set spot on before clipping.
In PP cs6 and cs5.5 you can just bring all the Information that is above 1.0 in the waveform down with any 32 bit Filter that deals with Levels. But it schouldnt be up there above 1.0 in the first place or am I wrong?
This also applies to the Canon XA10 camcorder
clipped whites:
[IMG]http://i46.tinypic.com/az9fm.jpg[/IMG]
Levels adjusted with 32 bit Filter in PP = No clipping in highlights
[IMG]http://i48.tinypic.com/ofrl86.jpg[/IMG]
In AfterEffects its different: You would have to work the whole AE Project in 32 bit to be able to save the clipped detail in the whites. If you work in 8bit (which is standard ae project) then AE will just cut off all the info above 1.0.
But the question is: Is Adobe getting it wrong in the second consecutive Version of PP that is supposed to deal nativly with AVCHD? Or why do highlights that are not clipped on any AVCHD camcorder, appear as clipped in PP cs5.5 and cs6
Even the opensource FFDSHOW codec gets it spot on when played with mpclassic (as Andrew Reid from EOSHD.com stated and I also can confirm this)
Also when I connect the nex 5n with hdmi to my Plasma everything plays just fine no clipping at all!

when exposure on the NEX or any other camcorder is set spot on
Are you saying the waveform on the camera is displaying the same image differently to the wfm in PPRO? I would be surprised if that were the case.
That paper kind of looks very "hot" and it doesnt surprise me what the wfm is showing here.
FWIW: I extensively monitor my AVCHD by using level, gray and color cards in my shots. The wfms in the camera, monitor and PPRO always correspond.
Try shooting a color chart and also checkout .some color bars generated by your camera.

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

Just bought macbook pro and want to download purchases I have already made from itunes apps but when it says downloaded can't find it. I have run a search and found it in my mac but unable to open or do anything??

just bought macbook pro and want to download purchases I have already made from itunes apps but when it says downloaded can't find it. I have run a search and found it in my mac but unable to open or do anything?? Do not understand what is happening.

robynmm wrote:
so how do I get the same apps for my macbook pro? or is that not possible?
Not sure if that same Application is designed for Mac Os x, Search for Applications on App Store instead of iTunes on your Macbook Pro, as Applications available on iTunes Store on a Macbook is designed to work only on iOS Device like iPhone, iPad and iPod Touch and whatever is available on App Store on Mac is designed for Mac Os x.

I have bought a single App Premiere Pro in creative cloud and installed and downloaded my app, but the App will not launch

I have bought a single App Premiere Pro in creative cloud and installed and downloaded Premiere Pro, but the App will not launch.

Hi There,
We would appreciate if you could provide us the below mentioned information so that we can assist you appropriately.
OS Version:
Have you used Premier Pro as trial before?:
Error message/screenshot<if any>:
Thanks,
Atul Saini

I have received the message "Adobe Premiere Pro CS6 Family has been successfully Installed and is re

I have received the message "Adobe Premiere Pro CS6 Family has been successfully Installed and is ready to use." but I cannot find the program on my computer.

Hi corinne.blake.1991
Go to Control Panel -> Program and features -> See if the programs are listed there ...This is for Windows ...

I can only export in flash player, flash professional, and premiere pro

Hi,
I just got the CS5 production DVD's. I only installed AE on my macbook pro osx 10.6.8.
When I go to export my project/composition I only have 3 options, i can only export in flash player, flash professional, and premiere pro.
Where are the options to export as a quicktime movie and all the others?
Do I have to install the entire suite for these options to appear?
If so, why?
Thanks,
Jason

Render Queue.
More importantly, for the newly initiated, some time spent here would go a long way.

After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

Problem:
After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden. Around 5 minutes to get to/by the intro dialogue box. For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up). This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe. Premiere is not much different. It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs. It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well. As soon as I kill the Afterfx.exe process, they come back to life.
I have read nearly all threads on the subject, and am struggling to find a solution:
Deleted preferences folder under my username's appdata.
Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
ran windows system file checker/malwarebytes/rkill/rootkit detection.
checked for windows compatibility checkboxes under the file.
Uninstalled Wacom Tablet drivers
Disabled Aero
Started with ctrl-alt-shift to delete pref.
uninstalled video driver and replaced with one 6 months ago.
uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
moved plugins folder
moved opengl's plugin out of the folder temporarily
Disabled all 3rd party codecs (xvid was the only one installed and for months)
reinitialized default directshow filters
checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
used msconfig to selective startup without other applications/services running.
Uninstalled all adobe products, and reinstalled.
I performed all of these in a systematic manner, trying to solve the problem. None have fixed the problem.
So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application. Any thoughts?
System Info:
PC Windows 7 pro 64-bit SP1
Core i7 - 960 24GB ram
AMD Radeon 6750 v12.10
Adobe CS6 Master Collection

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Why Do Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up.

Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Photoshop.exe
Application Version:          12.0.0.0
Application Timestamp:          4bbc5b10
Fault Module Name:          CoolType.dll
Fault Module Version:          5.7.82.7602
Fault Module Timestamp:          4b980c97
Exception Code:          c0000005
Exception Offset:          0000000000073a92
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          7c82
Additional Information 2:          7c821a1fc13b00b508d1bb6ee7ecaf44
Additional Information 3:          019c
Additional Information 4:          019cb6db15489631b8a43faf27e30830
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Adobe Premiere Pro.exe
Application Version:          5.0.3.0
Application Timestamp:          4ce382d1
Fault Module Name:          CoolType.dll
Fault Module Version:          5.7.82.7449
Fault Module Timestamp:          4b7b1af3
Exception Code:          c0000005
Exception Offset:          00000000000739ea
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          889a
Additional Information 2:          889afed61eb6ddf1c1c3419adc6026b6
Additional Information 3:          8235
Additional Information 4:          823549a371dff618695395cc0a8514ee
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine. Any clues would be appreciated.

It does not necessarily mean a "corrupt" font, but can be a font that PrPro, and PS, cannot handle.
Though I have read that changes have been made, Open Office's DejaVu font would crash PrPro's Titler - every time. There are quite a few others. Font Dr, and similar utilities, will not see the font(s) as corrupt, but they are so poorly designed, that PrPro and PS cannot deal with them.
Though it can be a long, drawn out process, one can often zero in on the problem font(s), with a little work. This is accomplished by first defining the "System Fonts," and not touching them. Then, uninstall half of the remaining fonts, and testing PrPro and PS. If they launch fine, you know that somewhere in that list of fonts, the problem exists. If there is still a failure to launch, chances are good that the problem font(s) reside in that half, that are still installed. Note: because the problem still exists, does not guarantee that there are NOT problem fonts in that uninstalled group, so keep that in mind.
Repeat the proces, by uninstalling half of the remaining fonts and testing.
If necessary, repeat by removing half of the now remaining fonts and testing.
When you get to a point, where you are no longer getting problems, reinstall fonts, in small groups, testing in between. The smaller the groups, the easier it will be to pinpoint the problem font(s).
Keep notes on which fonts you are uninstalling and reinstalling, until you narrow it down to the problem font(s).
I would start by uninstalling any "free fonts," and then commercial, 3rd party fonts. A lot of free fonts are just poorly designed, and can cause issues, though they might work fine in some other programs.
I use a font manager, so that I only have ~ 350 fonts installed at one time, and then dynamically install fonts, as needed for Projects. That keeps my machine clean, and if, upon installation, I get a crash/hang, I know that at least one font in that Set is causing it. This helps, as my workstation has ~ 19,000 fonts on it, and some are free fonts, and many are from 3rd parties. Some are also very, very old.
Good luck,
Hunt
PS - one common cause for hangs on loading PrPro can be from VST's, used in Audio-editing. If you also have a lot of VST's, you could have two issues with two separate programs, i..e. PS hanging on fonts, and PrPro hanging on VST's. The results would be the same, but the causes could be different. That leads to even more work. For PrPro, also see this ARTICLE. If you get PS launching, but PrPro is still not functioning, drop by the PrPro Forum, and someone can help you there.

DVD Rendering and Burning: differences between Premiere Pro and Premiere Elements

I am landscape photogapher and wish to either create slide shows in Premerie or import them to Premiere from H264 1080 quicktime files generated by Ligthroom 3. I do not do frame by frame video editing. My only goal in using Premiere is to be able to render and/or burn DVD's and eventually Bluetooh compatible DVD's for play back on commercial flat panel TV's, e.g., Samsung flat panel dvd's.
Are the DVD rendering and burning capablity of Pemiere CS5 Pro and Premiere 9 Elements equivalent , i.e, are that both as likely to produce DVD's that render with natural color on commercial flat panel TV's?
My prior experience is that my Lightroom generated 1080, H264 quicktime movies have perfectly natural color on Mac LCD and other computer monitors but see very over saturated color on commecial flat panel tv's.
Discussions with Adobe tech support folks are contradictory on this matter.

The main differences between the authoring capabilities (the assembly of DVD/BD, navigation and Menus, plus burning) of Encore (the authoring program, that ships and installs with PrPro) and PrE 9 are:
1.) Encore is a full-featured authoring program, offering a lot more power and flexibility, but at the expense of having to do it "by hand," where PrE 9 is very limited in the navigation that can be employed, and it uses Menu Sets for that automation. Though PSD's, like the Menus in Encore, they have many special aspects, that must be considered, when doing any customization.
     A.) In Encore, one can create almost all sorts of navigation in the DVD/BD, limited almost exclusively to the limits imposed by the DVD, or BD specs.
     B.) PrE 9 will allow Autoplay, with no Menu, or will automatically create Scene Menus, per the Chapter Markers that you add - and that is ALL. There will      be no Into AV material. No Subtiltes. No supplemental Audio streams. Only linear navigation, or no navigation.
     C.) Menus for Encore are much more easily customized, where there are some major conventions in those from PrE, that MUST be addressed.
2.) Encore can Burn an Image (ISO) - no Image in PrE, and can Burn a BD to Folder, which cannot be done in PrE - only for DVD.
3.) Encore offers the capability to adjust Layer Breaks for DL discs.
4.) Encore allows one to adjust the Burn speed, and in PrE, one is stuck with the "fastest" based on the speed of the media + the burner
5.) Encore allows output to a Flash delivery with pretty much full navigation.
6.) Encore allows for changes in the Subpicture Highlight Color Sets, and PrE will only do that, with some Menu Set editing.
7.) Encore offers a SlideShow feature, but I feel that it is rudimentary and limited, and assemble mine in PrPro, then go to Encore for authoring.
8.) Encore is a separate program, though interfaces with PrPro with ADL (Adobe Dynamic Link), and is NOT available as a stand-alone any more - only with      PrPro.
There are probably more differences, and some of the above might not make any difference to you. Things can probably be summed up as: Encore = great power and flexibility, but with things being done manually, and PrE lacks the power and flexibility, but is semi-automatic, so probably easier to use on simple Projects.
Good luck, and hope this helps you make the decision,
Hunt
[Edit] Sorry that some of the formatting for the Outline did not translate well. Gotta' explore the Outline formatting in the editing screen more, 'cause it would probably have fixed things. Sorry about that.

Nikon D7100 and Premiere Pro

I have experience editing in Adobe Premiere Pro CS4 and want to upgrade to CS6. I have recently changed to using the Nikon D7100 to produce video instead of a traditional video camera. It is my understanding that Adobe does not directly support the .MOV files produced by Nikon. I am curious how many issues arise from such editing? I am an amateur user, will it be to complicated to conversions (do I even know what I am talking about)? Also does the quality of the video degrade as a result of conversion?

The files work natively in Premiere Pro CS6. Some users report that they get better performance when batch renaming clips to .mpg. Here is a thread: http://www.flickr.com/groups/nikon-d5100/discuss/72157630303565658/
It's the QuickTime wrapper which affects performance.

New pc for AE and Premiere Pro CS5

I'm in process of building a new PC.
I just started working with After Effects and Premiere Pro and my current PC is not really up to all the 1080 footage...
I currently own a E8400 with 8GB DDR2 Ram and some cheap motherboard (Intel DQ35JO) for reference.
I already own 2 x Samsung HD103SJ "Spinpoint" F3 1TB HDDs and a XFX 6850 Black Edition 1Gb which I plan to keep.
I have 2 options:
1)
Intel i5-2500K
Gigabyte P67A-UD3-B3
G.Skill F3-10666CL9Q-16GBXL Quad Kit 16GB (4x4GB) PC10600 DDR3
OCZ Vertex2 E 90GB 25/S300 SSD for system files (windows, program files, etc...)
I can get this for about 570 EUR / 820 USD
2)
Intel i7-980X ot i7-980 (is there a big difference between them performance wise?)
Gigabyte G1 Guerilla
3 x G.Skill F3-12800CL9D-8GBXL 8GB (2x4GB) PC12800 DDRS (for a total of 24GB or RAM)
OCZ Vertex3 120GB 25/S600 for system files (windows, program files, etc..)
I can get this for:
- with i7 980 - 1145 EUR / 1645 USD
- with i7 980X - 1485 EUR / 2133 USD
Will the 2nd option make that much of a difference in AE and Premiere Pro that is worth 2x-3x more money?
Thanks for opinions

Thanks for a fast reply.
Ok, let's say skip the overclocking for now (I used to overclock a ton back when it was Celeron 600 and similar CPU time , but I'm tottaly out of it now...not really on track with the overclocking of new CPUs...it used to be simple back in the days)
I'm ditching the 2500k option.
If I'm not overclocking, I could get a rather cheap motherboard
Asus Sabertooth X58
Intel i7 970/980/980X
16-24GB ram
GTX570
Combination of this is between 1150-1550 EUR / 1600-2250 USD depending on different choices.
Considering I'm not willing to overclock, is there to expect THAT much of a difference with 980X and 24GB ram against 970/980 (they're priced the same) with 16GB ram (considering it is 30% difference in price...will it be 30% faster in AE and Premiere Pro?)
I suppose this is my last question, don't want to bother you too much

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Initializing Installer... and then nothing in Photoshop CS5 and Premiere Pro CS5

Hello. I have a pretty big problem, I can't install Photoshop or Premiere Pro on my PC. I get to the " initializing installer " part, it fills to 100%, then the window simply disappears. What should I do ? My OS is XP SP3, and I have enough HDD space left - around 50gb in C: and 550gb in D:, so this isn't the problem. Also, I don't have any old installs of Photoshop / Premiere Pro on my PC. As for the windows, I've just re-installed it last week, so I'm sure that I don't have any viruses or stuff like that. One thing that I must mention - before I re-installed my windows, I was able to install both Photoshop and Premiere Pro. I hope you can help me. Thanks

Photoshop 32bit should, but Premiere Pro CS5 will NOT install on WinXP... PPro CS5 REQUIRES a 64bit operating system to install
If you really need PPro CS5, you will have to upgrade Windows to Win7 64bit... the Pro version is most used for video editing
If you bought a CS5 suite, Premiere Pro CS4 is included for those with a 32bit version of Windows

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over.

Similar Messages

Maybe you are looking for