I have a macbook pro mid 2010 and the trackpad doesn't let me click
like i'll click but it's sunk in or stiff at times. I do not have applecare, can I still go to apple and ask them to fix it if I am willing to pay over counter? A friend of mine told me that i could not because my macbook was too old.
Hi,
Never mind what your friend said, make a Genius bar reservation http://www.apple.com/retail/storelist/ and let them have a look.
It could be a battery problem. In About this Mac > More info> System report > Power see what it says about the battery.
Similar Messages
-
Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate
uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems? -
I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise Thank You!!
There's no reason to install a smaller hard drive. In some cases, it may decrease performance.
Your MacBook Pro comes with a 5400 rpm hard drive, so what you can do is to install a smaller, 7200 rpm hard drive, so you will get a better performance. Any 2'5" SATA hard drive will work, but you can have a look at OWC for hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
HGST and Seagate hard drives have a good reputation, so you can purchase one of them -
I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148 -
I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.
That would indicate a network issue.
Reboot ATV and router
Make sure DNS is set to auto
Ensure router is up to date, if on wifi try ethernet
Go to istumbler.net to get a report of the network, look for signal strength and noise -
I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!
Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao. -
i have a macbook pro from 2009 and the software is 10.5.8 how do i update it so i can have more interaction with the applications
Note some programs may not work with Lion or later
Upgrading to 10.7 and above, don't forget Rosetta! -
I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?
Hi,
Have you tried
1.leaving the screen flipped open,
2.connecting power
3. connecting external monitor; waiting for it to 'wake up';
then 4. closing lid of MBP to activate clamshell mode? -
I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.
Hello hbothner,
Thanks for using Apple Support Communities.
If you'd like to change the colors on your Mac's display, then you can calibrate your display by following the steps in the article below.
OS X Yosemite: Calibrate your display
Take care,
Alex H. -
Buy new battery for MacBook Pro Mid 2010, and in-store installation?
I need to buy a new battery for my MacBook Pro Mid 2010. I was wondering if there was an Apple store where I can buy a new one and have it installed there. i tried Best Buy and they weren't really any help and suggested to go to an Apple store. However, I don't know if I could have them install right there.
its best to make an appointment at your local Apple store. If they are busy and you walk in without an appointment, they will turn you away.
-
I just bought my macbook pro 2 weeks ago. I am new to apple so it is pretty much greek to me at this point but I have been able to figure out or google most of my questions. I have found a million posts about the Airplay feature for mirrioring and most of them are the same issue having a mac that is pre 2011. There should be no reason I would not have the Airplay option on my system.. I have done the updates avaliable for both the mac and the AppleTV unit, which is a Gen 2 or 3, Also brand new as of 2 weeks ago. Does anyone know what else I can do or is this something I will have to take in the the Apple Store to fix?
Welcome to Apple Communities
You're running Lion, and Mirroring is in Mountain Lion. http://www.apple.com/osx/uptodate -
How to format HDD and reinstall OS on macbook pro mid 2010 without the installation DVD.
After updated the OS with MAVERICKS becomme my macbook very slow. So I want to format the HDD and reinstall the OS but without the installation DVD - (lost).
Could some one advise me how to proceed? Thank youWelcome to Apple Support Communities
OS X Lion and newer include OS X Recovery to reinstall Mac OS X without the need of a DVD. See > http://support.apple.com/kb/HT4718
First of all, copy your most important files to an external drive, or make a backup of your files. Then, hold Command and R keys while your Mac is starting, open Disk Utility and erase Macintosh HD by choosing it in the Disk Utility's sidebar and going to Erase tab.
Finally, close Disk Utility and reinstall OS X -
Download it many times still not working...
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
MacBook Pro mid 2010 goes to sleep right after booting
Hello and thank you in advance to anyone that can help me. I have a MacBook Pro mid 2010 and I recently spill tea on the computer. I took everything and dried out everything hoping and praying that it will start again. I put everything back together and it started but right after starting (like 15 seconds after) the monitor goes to sleep right away. But here is the weird thing; I have Windows 8 installed on bootcamp, so if I start on bootcamp, it starts with no problem. I am actually writing this from my macbook but on bootcamp. Any ideas why it goes to sleep on Mac but in Windows seems to be working just fine?
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
I can't expand my partition and I have free space Macbook pro mid 2010
Hello! I have a macbook pro mid 2010 with Mavericks, I had 2 partitions and deleted one with the disk utility, now I want to expand the one that I have left but I can't, I cannot drag the corner of the partition because it is below of the free space, I will post a picture so you can understand better. Also I tried using iPartitions but it won't let me make any changes. Thank you
Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau
Maybe you are looking for
-
I need to merge my apple accounts to get proper function of iCloud and iWork apps
I like so many people now have two apple ids. Becase I was a mobile me subsriber and I had a itunes account. The migration from me.com to icloud.com created another apple id. So if I want my apps and music i have purchased over years i have to use
-
Is there a practical size limit on JPEG format image files?
I have noticed when working with Photoshop v7.0 on Windows XP that, when creating a JPEG format image file from a very large scanned image (more than 800 Mb, maybe), the .jpg file will usually be saved on disk at any of the possible compression ratio
-
Thumbnails in Column & List views
My Finder (v10.4.5) mostly does NOT show the thumbnails of my JPGs in Column & List views, unless those JPGs were created on my computer (Tiger 10.4.6). I got it to finally show the thumbnails in Icon view (View > Show View Options > Show Icon Previe
-
Trackpad doesn't work for 5 seconds after any USB device is connected
This is really irritating. I could plug in any USB device - a hard drive or iPhone, and the trackpad will not work for about seconds of trying to get the pointer to move around the screen. Normally there's nothing connected to the Mac, so when someth
-
Hi everyone... my MacBook is relatively new and has worked fine. Just three weeks ago, Skype started giving me problems. I can sign on and call people, they can see and hear me. However, I can't hear them (or it comes through really patchy) and their