I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do this?

Hi Jessica,
No, the SD slot will not work, you need an ExpressCard/34 slot.
I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it.

I have a macbook pro. I had iphoto on it prior to my hard drive crashing. Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?

I have a macbook pro. I had iphoto on it prior to my hard drive crashing. Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?

Have you tried
http://support.apple.com/kb/HT4928

I have a MacBook Pro running mac osx 10.8, Screen saver keeps reverting to national geographic photos.

I have a MacBook Pro running mac osx 10.8, Screen saver keeps reverting to national geographic photos.

Just found this solution on another website. I tried it and it works. No more polar bears and Savannahs!
Apparently if you put it in the folder called "Desktop Pictures" it will work.
So, copy whatever folder of pictures you would like to use as your screensaver and then go to:
Macintosh HD>Library > Desktop Pictures
Paste your folder into this folder called "Desktop Pictures".
You may have to enter the administrator code (the password you use to open your mac usually).
Then, go back to System Preferences, go to Desktop and Screensaver, click on the Screensaver tab on the top, go to the drop down menu beside "Source" (under the picture) and click on "Choose Folder". Navigate to the Macintosh HD>Library>Desktop Pictures and then click on the folder you just pasted in there. Click "Choose" and you're all set.

I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

Just bought an iPad 2 and i have a MacBook Pro OS X version 10.4.11, will it not work with this software?

just bought an iPad 2 and i have a Macbook Pro OS X version 10.4.11. can i not set up my iPad 2 because of this and i have to get the 10.5 version???

You need to purchase and install 10.5 or 10.6.
(58630)

MacBook pro one week in San Salvador. Will not start at all. Power cord has green light on but nothing happens when power button is pushed. Ideas? Any source of service in El Salvador?

My Mac book pro will not power up at all. Owed cord green light is lit up fine. What to try? Any support in ElSalvadr?

Compugrafica, S.A. DE C.V.
2252-3075
San Salvador
Equipos Electronicos Valdes, S.A. de C.V.
503-2209-2217
San Salvador, San Salvador
GBM DE EL SALVADOR S.A. DE CV
(503) 22505600
San Salvador
MACHON Y VEJARANO, S.A.
2243-9090 2224-6406
San Salvador
SERVITOTAL
231-7000
San Salvador, Zz

I have a Macbook Pro with OS 10.6.8 with no updates. Bundled is iPhoto 11, version 9.2.6. I would like to update my OS to 10.9.5 or later. Is this possible and which version is recommended?

I have a MacBookPro with OS 10.6.8. It has no updates. This version contains Iphoto 11, version 9.2.3. I would like to upgrade my operating system to 10.9.5 or later. Is this possible and how best to proceed? How will this affect iPhoto?
Thanks, Jeff

If you have a mid/late 2007 MBP you can install the latest OSX that is available, on your MBP. Mavericks (10.9) has been replaced by Yosemite (10.10) and is no longer available in the App store.
You choices are Lion (10.7), Mt.Lion (01.8) (both $20) or Yosemite (free). The first two are available from the Apple online web site. Yosemite can be downloaded from the App store.
Ciao.

My Macbook Pro OX S 10.6.8 version will not update!

My Macbook Pro OX S 10.6.8 will not update! I've tried restarting, clearing cookies, checking javascript is turned on, removing 'older versions' of an update, nothing is working. Please help! What else can I do?

I would attempt to do them one-by-one to see if it is one particular update that is hanging it up. I would start with the ones from Apple that are either Security Updates, or Firmware Updates. The ones with the Grey Circle/Arrow in them are important updates, I would attempt to do them first. It may be a bad package from something else that is hanging it up.
If you can successfully install the crucial updates, then afterwards I would try doing all of them.
Also is it just attempting to install but then when you reboot it is still saying you have to update? Or is it giving you an error message about updating?

HT1338 Migration assistant problems setting up new Macbook pro.... System preferences will not open and Mozilla products do not open "profile missing"???

Used migration assistant to set up new Macbook pro from old macbook pro. Many "profile" problems.
Will not even open "System Preferences" for user whose profile info was transferred. (Will for "Administrator")
Cannot use Firefox or Thunderbird, profile missing.
Help???

Launch the Console application by entering the first few letters of its name into a Spotlight search, and look under "User Diagnostic Reports" for crash logs related to the application(s). Select the most recent one and post the contents -- the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report.

Macbook Pro after attempt to update to Mavericks will not start-up - it will not go into recovery - reset SMC - reset NVRAM, still grey screen, logo and spinny thing

Updated my Macbook Pro with Snow leopard, then updated that to 10.6.8, then downloaded and began installing mavericks.
Mavericks apparently installed? I looked away and when I looked back my computer was off! It has not worked since.
I tried safe mode - where you could see progress and a repatitive error message scrolled (very fast) firever down the screen. Nothing seemed to be futher going to happen so I turned it off again. All other discussion forums I have followed say try time-machine back-up (I do not have it).
Really, I am wondering, what an earth is going on?

If there's any way to read that screen message it probably explains the problem.
You might try to boot into "verbose mode" to see if that makes it any easier to see the message.

I have 2 MacBooks upgraded to Mavericks. Mail on one will not accept my Exchange password. Works fine on other macbook and a mini. Help?

I have 2 MacBooks upgraded to Mavericks. Mail on my MB Air will not accept my Exchange password. Works fine on other macbook and a mini. Any ideas?

Hi, and welcome to Apple Support Communities.
To be clear, are you talking about accounts set up in Apple's Mail application?

I have a macbook pro with IOS 10.6.8 and my itunes is version 11.0.1, can I airplay to an apple TV?

please help, I have a macbook pro with a IOS 10.6.8 operating system, I just opperated my ituned to version 11.0.1. Can I airplay my macbook to an apple tv?

On Snow Leopard, you can't use AirPlay Mirroring, but if you upgrade to Mountain Lion, you will be able to use AirPlay MIrroring > http://support.apple.com/kb/HT5404
If you want to upgrade to Mountain Lion, first make a backup of your files. Then, open App Store and purchase Mountain Lion, and follow the steps to upgrade to Mountain Lion. Check if your applications are supported > http://www.roaringapps.com
If you don't want to upgrade Mac OS X, you can also install AirParrot > http://www.roaringapps.com
If you are referring to AirPlay on iTunes, you can do it. The AirPlay icon will appear on the iTunes toolbar when your computer detects the Apple TV

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

it is a windows 8

I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards.

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

Similar Messages

Maybe you are looking for