I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.
I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!
If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.
Similar Messages
-
I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one. -
I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
Have a MacBook Pro running Lion (10.7.9) and an IMac running Snow Leopard (10.6.8). Want to Back up both images and restore on opposite machines. Essentially swapping images between hard drives. Is this possible and any "gotcha's" to look for? Thanks
If the MBP came with Lion, it most likely won't boot with SL. Easiest thing to do is create a bootable backup/clone of each to an ext HD, partitioned to hold each on a separate volume, ensure that the original machines can boot with their respective clones, and finally, try booting the other machine with the other clone. Images are useless since you can't boot with them to test them out.
-
Have a macbook pro running osx lion. Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop. Also sometimes get a message sayiing computer doesn't recognize device. When I opened disk utilities the Kindle disk does show up there. What am I missing?
cashworth wrote:
Kindle is connected directly, not thru a hub. Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac. She said, "I'm not really familiar with apple products."
Precisely why it's not an iPad, and why it doesn't cost very much. An Apple rep would tell you how to connect an iPad to every computer.
Go here: http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470 -
Have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open
I have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open. It upgraded to 6.1. What is the best proceedure to get Safari working again?
ThanksThis is the most common problem :
How do I uninstall Glims?
If not that, please include a crash report & test in a new or Guest user account. -
I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard! -
Please help!! I have a Macbook Pro, running Yosemite. Lightroom 5.7
Whenever I try to add music to a slideshow, it shuts down the program.Try resetting your SMC and NVRAM before attempting to install again.
Resetting the NVRAM/PRAM
Note: This will not delete any data.
The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Turn on the computer by pressing the Power Button.
On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
Release the keys on the built-in keyboard.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin -
I have a MacBook Pro running mac osx 10.8, Screen saver keeps reverting to national geographic photos.
Just found this solution on another website. I tried it and it works. No more polar bears and Savannahs!
Apparently if you put it in the folder called "Desktop Pictures" it will work.
So, copy whatever folder of pictures you would like to use as your screensaver and then go to:
Macintosh HD>Library > Desktop Pictures
Paste your folder into this folder called "Desktop Pictures".
You may have to enter the administrator code (the password you use to open your mac usually).
Then, go back to System Preferences, go to Desktop and Screensaver, click on the Screensaver tab on the top, go to the drop down menu beside "Source" (under the picture) and click on "Choose Folder". Navigate to the Macintosh HD>Library>Desktop Pictures and then click on the folder you just pasted in there. Click "Choose" and you're all set. -
Have a MacBook Pro running 10.5.8 Leopard. Can I just download 10.6.8 Snow Leopard so I can wifi sync with iPhone and iPad?
To expand on Niels post...
First you need to check that your current Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
If it does... then you need to Purchase and Install the Snow Leopard Disc,
Mac OS X 10.6 Snow Leopard
( It should be noted that Apple will send paid MobileMe members the Mac OS X 10.6 DVD for free.) -
In have a macbook pro running os 10.9.1 i can't find iweb any where on my computer or in the app store, i have pages, numbers,keynote
but can't find iweb, i had iweb on an older cumputer, ???? please help Thank YouiWeb was discontinued about 2 years or so ago; you can still find it if you want to buy a retail version of the iLife 09 suite available at online resellers and ebay.
-
Have old MacBook Pro running tiger 10.4 want to save date to external hard drive and buy newer MacBook and still use same drive. Any suggestions, most WD drives say nothing about os tiger 10.4. The OS compatibility is much newer on the data. Totally confused. Not a computer person.
I haven't checked reviews recently but there's a difference between bare drives and drives with enclosures. Western Digital made some of the most reliable drives last time I checked, though the enclosures weren't all that great. It is convenient to get both in one package but I usually buy a highly rated enclosure and then put a highly rated drive in it myself. OWC sells some good enclosures but if they put a so-so drive inside of it then the package is only as good as its weakest component. If you get a package from them, ask them what drive is inside (some vendors have no idea what's inside - went to an Apple Store recently and they couldn't tell me what was inside some of their Apple brand enclosures). My first thought if buying a new drive would be to buy a OWC enclosure with a WD drive, but chek around because I may be out of date.
10 years ago Seagate was one of the best drives. Now they rate poorly in reviews. -
I have a Macbook Pro running OSX Lion (10.7.3). Is it true that I must have an Airport or Airport Extreme Card installed in my Mac to set up my Airport Express? Nothing was said of this when I purchased this item at the Apple Store.
no u dont have to install any card...your mac will detect the airport express once its working and u can configure ur Airport xpress using ur macbook pro..
-
i have a macbook pro running lion and cannot log on to my microsoft exchange server. Not a problem with my iphone and ipad are there any issues or fixes for this?
I found the following suggested fix, posted by a user on Barnes & Noble's site:
1. Create a folder in your Applications folder, call it: NOOKforMac
Once you've done this, copy the Nook app to this folder. This should allow the app to run on the 1st or possibly second attempt to launch it.
2. Once you're done using the app always quit it by clicking on the X (red in some cases) button of the application window (upper left hand corner)
This seems to have resolved the issue and my guess is that somehow the .dmg volume path is somewhere hard coded in the app configuration.
Elsewhere in that thread, the administrator advises calling Customer Service Team at 1-800-THE-BOOK (1-800-843-2665) and choose option 2 for Digital Support.
Good luck. -
How do I get my macbook pro to recognize my android phone so I can transfer photos from the phone
how do I get my macbook pro to recognize my android phone to I can transfer photos from the phone
you could try this:
http://www.android.com/filetransfer/
there's something called "Airdroid" on the Play store (whatever that is)
or if your files are on an sd card, you may wish to use an sd card reader. Just plugging it in via USB might possibly work. There's also something called DoubleTwist (basically iTunes for Android, which will allow you to
sync your music , photos, videos, etc
hope one of these works for you
John B
Maybe you are looking for
-
Thunderbird keeps downloading to wrong location
I`m working in windows 7 professional 64 bit with a Gmail account I`ve set the location for the mail on my E disk rather then my C disk. (E:\Thunderbird) Nevertheless thunderbird keeps downloading to C:\Users\T\AppData\Roaming\Thunderbird. Somehow my
-
Hi I use a UDF to remove leading zeros from an alphanumeric string. When I test it in the Message Mapping, it works fine. But when the output comes, it's not removing zeros, in SXMB_MONI What possibly could be the reason ? Regards
-
Reading jsp request in jsf code
I have a normal jsp page. On submitting the page a normal HttpRequest is generated. I need the jsf page t read this request, extract its attributes and display the desired results. the jsf page is using the backing beans to get the results. i would l
-
SideBySide Error when starting FormDesigner.exe
Hi there Since I've installed Adobe Acrobat 9.0 Extended Pro I get tonns of SideBySide Errors in my Eventviewer like the following - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="SideBySide" /> <Even
-
Hi I am just trying to understand the scope of this in AS3 for example in AS2 basicM_btn.onRelease = function() { this._visible = false; Would have made the button invisible In AS3 I was expecting to write the same thing as this function clickHandler