I have a MacPro 1,1 with a NVIDA GeForce 7300 GT, and want to set up 3 20in monitors HD, Any Ideas?

I am trying to get 3 20 inch displays to work with my MacPro 1,1 I have a NVIDIA GeForce 7300 GT video card. Does any one know what the cheapest solution is to get my configuration to work? I would like to have HD on all my screens.
Thanks,

I said it supports three. by itself.
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
Guide to Apple graphic display adapters needed
https://support.apple.com/kb/HT3235
Atlona (Dual Link) DVI to Mini DisplayPort Converter for Apple 27-inch LED and 27-inch iMac
http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html
Mac Pro (Early 2009), Mac Pro (Mid 2010), Mac Pro (Mid 2012): Issues with three displays and multiple DVI, HDMI connections
It's not the USB data that is needed to run three displays. It's the extra POWER. If you read the Apple article, they say the only solution they endorse is their US$100 Dual-Link adapters. Check the table at the end of the article.
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations

Similar Messages

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Nvidea GeForce 7300 GT and ati hd 5870 issues with mac pro and dual monitors etc

I have a mac pro 1,1 running 10.5.8
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          8 GB
Bus Speed:          1.33 GHz
I installed an ati 5870 and fcp 7 wont run, it says no vram. so I reinstalled the NVIDIA GeForce 7300 GT. This card however doesnt support my 46" sony bravia client monitor via vdi to hdmi (with adapter) is there anyway to make it do that (patch, driver, tweek to card)? also what other card should I get that will support the 30" apple display and the sony. I have another system luckily thats newer that I work on with clients, but I dont want to foresake the other mac pro yet. is the 5770 going to work? Please let me know what you think, I greatly appreciate it. Also my system profile doesnt say I have pci express 2.0 on either my old or new mac pros.
why are there no patches for this card, updates, drivers? nada. let me know. thank you.

*Is it possible to run the factory NVIDIA 7300 GT side-by-side with an ATI Radeon HD 4870 to achieve a three monitor setup?*
Yes with OSX. There may be problems with Boot Camp.

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
worth looking at for the future to understand backing up etc

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

I have a page with multiple quicktime players on it, and want to close all other players when any of the players is started.

I have a page with multiple quicktime players on it, and want to close all other players when any of the players is started.
<div id="mp3-player" style="display:none;height:15px !important;float:left;margin:0px 0 15px 0px; width:270px !important;">
                       <div style="height:15px !important;width:270px !important;">
                           <embed src='http://209.15.205.3/~cityval2/MP3/352681.mp3' width="270px" height="15px" AUTOPLAY=false CONTROLLER=true LOOP=false PLUGINSPAGE="http://www.apple.com/quicktime/" />
                        </div>
                    </div>

One key point.
1. Migration within the same forest ; we can say operation is cut & paste (Source account wil be not present)
2. Migration between the forest ; we can say operation is copy & paste ( Source account will be present)
Also find some ADMT cool stuffs.
ADMT Series – 1. Preparing Active Directory
ADMT Series – 2. Preparing the ADMT Machine
ADMT Series – 3. SID History
ADMT Series – 4. Password Export Server
ADMT Series – 5. Machine Preparation
ADMT Series – 6. Service Account Migration Wizard
ADMT Series – 7. Group Account Migration Wizard
ADMT Series – 8. User Account Migration Wizard
ADMT Series – 9. Merging Users with a Different sAMAccountName
ADMT Series – 10. Security Translation Wizard – Local Profiles
ADMT Series – 11. Computer Migration Wizard
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

I have a Verzion iPhone 4s with iOS 7 installed on it and the friend my friends dose not seem like it is working, and it is when it is trying to find a certain person, it says location unavaiable, and the other person with the other iphone it friend my fr

I have a Verzion iPhone 4s with iOS 7 installed on it and the friend my friends dose not seem like it is working, and it is when it is trying to find a certain person, it says location unavaiable, and the other person with the other iphone it friend my friend is on in locations service and on the verzion iPhone it is on

Little hard to understand what you are asking. Let me guess that this not an Iphone4S issue. Its a problem with your service provider. Contact them.

The picture ID on my outgoing Mac mail is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo. I have no link or connection with anybody or other accounts whatsoever, and I don't have ANY third-party networks myself.

The picture ID on my outgoing Mac mail is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo. I have no link or connection with anybody or other accounts whatsoever, and I don't have ANY third-party networks myself. HELP!!!

Nobody but you sees that photo, it does not appear on outgoing emails.
To remove the picture rather than change it, open Address Book and select your personal card, then from the menubar select Card > Clear Custom Image. Now the system will use Apple’s generic user picture in the login window and System Preferences’ Accounts pane. Mail and Address Book will remain blank until you designate a new picture in Address Book or System Preferences > Accounts.

I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode?

I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode? However, when I launch System Restore it asks me to load the disc marked with teh sinfgle dot but then doesn't seem to run it?

Follow up. I went to the site at the link I refered to and downloaded the recomended
"NetBoot for Mac OS 9." http://support.apple.com/kb/DL1192
The netbook9.dmg needs to be mounted on a PPC Mac as it would not open on a the intel Mac I used for downloading. (Reason - legacy image should be converted.) I copied to a G4 iBook and mounted it then saved the english folder conaining the NetBook.pkg. From there follow the attached picture using Pacifist to extract the NetBook HD folder which contains an OS 9.2.2 System folder.

Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9

Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9? And why is apple not allowing people like me to try out this installation? Any reason that are too technical that people like me cannot upgrade and handle?
This would solve many apps to run on this.

It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion and Mavericks require 64bit native drivers. Mountain Lion and Mavericks no longer support Intel's GMA 950 or GMA X3100 graphics processors.
While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion and Mavericks are pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/

I have a MacPro 1,1 with a NVIDA GeForce 7300 GT, and want to set up 3 20in monitors HD, Any Ideas?

Similar Messages

Maybe you are looking for