I have a MacPro late 2011 and each time I use the USB connection it freezes my desktop, also I have lost my windows OS on VMware Fusion, regards Bettws
I have a MacbookPro 10.6.8 and each time I use the USB connection it freezes my desktop, also I have lost my Windows XP operating system on VMware Fusion. regards Bettws
Energy Saver is very problematic with non-Apple USB devices. Which means when you close the lid to your machine, those devices will not necessarily appear until you next restart the computer.
Secondly, Windows XP is not secure anymore, unless you pay Microsoft a special licensing fee. To avoid that, upgrade to at leats Windows Vista:
https://discussions.apple.com/docs/DOC-2741
Similar Messages
-
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
Every time I try to downlaod update to itunes. I receive an error message. any ideas? I want to update my iphone 4 and each time it requires the installation of newest itunes version?
i am having the same problem, my error message is that basically it (connection) has timed out! i have tried all day to get it to go thur
-
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
Each time I use a USB,IPHOTO,DVD or VMware Fusion connection the desktop mouse pointer freezes regards Model Name: Regards John
Model Identifier:MacBookPro10.6.8, 2
Model Name: MacBook Pro 10.6.8
Model Identifier: MacBookPro 8.2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C2*******F8V
Hardware UUID: *****
Sudden Motion Sensor:
State: En
<Edited By Host>Hi Allan,
Thank you for your early response, I eventually managed to unZip the requested download, each time I tried the computer froze.
EtreCheck version: 1.9.12 (48)
Report generated 19 July 2014 19:27:23 GMT+01:00
Hardware Information:
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6490M - VRAM: 256 MB
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:4:34
Disk Information:
Hitachi HTS545050B9A302 disk0 : (465.76 GB)
- (disk0s1) : 200 MB
Macintosh HD (disk0s2) / : 465.44 GB (58.8 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Kernel Extensions:
com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
com.ZTE.driver.ZTEUSBCDCACMData (1.3.35) Support
com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.35) Support
com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
com.novatelwireless.driver.3G (3.0.13) Support
com.novatelwireless.driver.3GData (3.0.13) Support
com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
com.option.driver.Option72 (2.15.0) Support
com.option.driver.OptionHS (3.26.0) Support
com.option.driver.OptionMSD (1.21.0) Support
com.option.driver.OptionQC (1.11.0) Support
com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
com.vmware.kext.vmci (3.1.2) Support
com.vmware.kext.vmioplug (3.1.2) Support
com.vmware.kext.vmnet (3.1.2) Support
com.vmware.kext.vmx86 (3.1.2) Support
com.vodafone.driver (3.0.9) Support
com.vodafone.driver.Data (3.0.9) Support
com.vodafone.driver.DisableAutoInstall (2.0.6) Support
com.zte.driver.cdc_ecm_qmi (1.0.26) Support
com.zte.driver.cdc_usb_bus (1.0.26) Support
de.novamedia.driver.NMSamsung (0.0.2) Support
de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Problem System Launch Daemons:
de.novamedia.nmnetmgrd.plist Support
Launch Daemons:
com.adobe.fpsaud.plist Support
com.citrixonline.GoToMyPC.CommAgent.plist Support
com.trusteer.rooks.rooksd.plist Support
com.vmware.launchd.vmware.plist Support
com.zeobit.MacKeeper.AntiVirus.plist Support
Launch Agents:
com.citrixonline.GoToMyPC.LaunchAgent.plist Support
com.conduit.loader.agent.plist Support
com.epson.ews.launcher.plist Support
com.hp.devicemonitor.plist Support
com.hp.messagecenter.launcher.plist Support
com.trusteer.rapport.rapportd.plist Support
de.novamedia.VodafoneDeviceObserver.plist Support
User Launch Agents:
com.adobe.ARM.[...].plist Support
com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
com.google.keystone.agent.plist Support
com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
VMCStatusMenu
Dropbox
Vodafone Mobile Broadband
HP Product Research
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
AdobePDFViewerNPAPI: Version: 10.1.7 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.7 Support
QuickTime Plugin: Version: 7.6.6
Google Earth Web Plug-in: Version: 7.1 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
GoToMyPC Preferences Support
Trusteer Endpoint Protection Support
Top Processes by CPU:
18% mdworker
7% WindowServer
2% Dock
2% Vodafone Mobile Broadband
1% SystemUIServer
Top Processes by Memory:
242 MB AntiVirus
78 MB Dropbox
53 MB WindowServer
45 MB rapportd
37 MB MacKeeper Helper
Virtual Memory Information:
2.00 GB Free RAM
864 MB Active RAM
182 MB Inactive RAM
995 MB Wired RAM
164 MB Page-ins
0 B Page-outs
I appreciate your assistance in this problem
Regards
John (omegajon) -
How do I stop Photoshop CS4 from creating a new layer each time I use the line tool?
How do I stop Photoshop CS4 from creating a new layer each time I use the line tool?
Each time I use the line tool, a new layer is created. How can I stop this? No settings were changed.
Thanks in advance.Look at the three options in the top bar.
-
I have an IPhone 4 and each time I try to update to iOS 7.0.6 I receive an error message. I have gone through te update process about 3 times and each time I get message saying there was an error and it was unable to update.
What is the error message, and the error number specifically? You can look it up here: http://support.apple.com/kb/TS3694
-
I Have an iPad 2. Since download of iOS 8.1.2 every time I use the browser--usually Google --this message comes up "a problem occurred with this webpage so it was reloaded". Touchpad also seems slow and jerky.
Its not necessarily freezing - just being slow to build.
May have something to do with this being a secured site - I an giving Opera a test run & this part of the apple site does not go into compressed load - but the non-secure parts of the site do. The issue may be that some sites like apples just have too much unimportant junk on the screen because the designers are on an internal network a few offices away from the server and never see all the issues that com up. -
How disappointing I can't not restore my phone from any iCloud backups. Each time it advises that there is a problem with my data. Spoke direct with apple support and said there is nothing I can do !
Any help / insightHow disappointing I can't not restore my phone from any iCloud backups. Each time it advises that there is a problem with my data. Spoke direct with apple support and said there is nothing I can do !
Any help / insight -
When I would use laptop before installing upgraded latest version of mozilla. I could go to frequent used site log and just click on a site and I would be straight into site of preference. Now this no longer exists with new version. I cannot find this anywhere, so now I have to type in each site I need access to. You have made it far less easier to use and it is much slower. Am I missing something here? Like google with there chrome version it is worse not better. I removed that too. Please advise otherwise your latest version will go the same way!
Make sure that the Location Bar is not set to "Nothing":
* Firefox (Tools) > Options > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks, Nothing
* [https://support.mozilla.com/kb/Location+bar+autocomplete Location bar autocomplete]
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites -
Flash player needs to be installed each time I use the computer
I need it for work and is a ripe old pain. Please help!
Reinstalled this morning. It worked to view videos on reuters.com. Turned off computer.
Turned computer on again in the evening. True to form, discovered it is not working again, and that I would have to reinstall it. But first, Checked System32 and SysWOW64 to see what files were there before doing a reinstall, and for comparisons’ sake. Previous to reinstall they are as follows :
Windows/System32/Macromed/Flash files are:
Flash64_11_1_102.ocx
FlashInstall.log
FlashUtil64_11_1_102_ActiveX.dll
FlashUtil64_11_1_1102_ActiveX.exe
Windows/SysWOW64/Macromed/Flash files are:
Flash11e.ocx
FlashInstall
FlashUtil11e_ActiveX.dll
FlashUtil11e_ActiveX
Note: I was right-clicking on each file name in the directory, then copying and pasting the file name into a new WORD document to make the above lists. This only worked with the System 32 files. SysWOW64 files could not be cut and pasted because I got the message, “Word cannot obtain the data for Flash11e.ocx link”. All the files in SysWOW64 had the same message. Lazy me had to actually type out the SysWOW64 file names as opposed to copy and paste. ;-) Could "inability" to "obtain data" have something to do with the system being unable to retrieve the code to make it work??? I run 64 bit.(see my first post above).
REINSTALL:
Reinstalled this evening from : http://get.adobe.com/flashplayer/
Confirmed that it is enabled in “manage add-ons” in the browser.
Confirmed that same files as listed above are unchanged after the reinstall.
Rebooted.
Confirmed that same files as listed above are unchanged after reinstall and reboot.
Confirmed it is enabled in “manage add-ons” in the browser.
Hope this helps, cuz really need a solution. I’m pretty sure that once I turn my computer off this evening, and then next time I turn it on again, I’m going to have to reinstall Flash again.
Thank-you.
curriebc -
POSSIBLE? Copy USB thumb drive image to file and rebuild it to use the USB drive ?
I bought an 8GB USB thumb drive and used it to create an install boot disk to boot for install or use disk utility to clone my system drive for failsafe. In other words it is called "Install OS X Mavericks" and I can boot from it.
SO, it just sits there and does nothing while I am not using it, and in the meantime I have some documents I need to get printed at Kinkos and class notes to carry around, and this drive could really be useful to do that, rather than waste time and money to buy a new one and keep track of them all. You know how these things always get lost of broken and you end up with a few of them and never know what's on them?
So ... in UNIX style I tried to do a dd of the drive "dd if=/dev/disk2 of=$HOME/usbdrive.dmg bs=4096" - assuming a 4K block size would work.
The system does not seem to recognize it, so I'm doubting if that was the correct way to do this, or if this can be done at all.
What I want to do in short is to not bother with formating or anything like that, and just create a disk image that I can store around until I need to put it in my USB drive to boot for an install, rebuilt, clone system drive, etc.
Can this be done, and does anyone know how to do it?
I do have Mavericks Server, but I'm not sure how or if the System Image Utility will do this? It sees the drive, but it just give me options to make a Net Boot Image, NetInstall Image, or a NetRestore Image ... and I do not know if any of those options will allow me to put it back on the drive when and if I need to?The command you want is
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
This command only works if "Install OS X Mavericks" is in the Applications folder and a 8GB usb is erased and named "Untitled". Change the command as you see fit. -
I am trying to download images from my Sony camera, DSC-W710, but iPhoto in my Mac is not accepting the download through a USB drive. Any suggestions?
KimEfromnc
Unfortunately some sad folks like to come to the forum not to help but simply to pick arguments for their own amusments.
No digitial still camera by any major maker requires installing drivers from a CD or DVD. None.
The same is true of many scanners and copiers too, in the hands of a knowledgeable computer user. People running older systems that they don't understand or know how to use will disagree, of course, if they choose to be argumentative. Personally, I ignore usch people.
The common causes for your issue are
1. A USB fault. That might be a damaged cable, an issue with the USB ports on your computer or your camera. Easiest way to check: swap the cables, try a different port, make sure your camera is on and charged
2. Try use a USB Card Reader or the Card Reader port on your Mac, if it has one.
3. Another possibility is that the camera card may need to be reformatted - you do this with the camera only. -
What do I do when the App Store wants me to
Use my old email and I don't remember the password even though I set up a new apple ID accountContent acquired from iTunes is permanently tied to the Apple ID that it was acquired with.
If that is not your Apple ID, delete the content in question.
If it is your Apple ID, reset the password and stop using the new Apple ID. -
So I installed the latest update of Itune on my Windows 7 Ultimate 64 bit PC.( the previous versions worked fine never a problem)
It installs, and comes up with error7 126. Reinstall program again.
So I go through all six steps to unistall, and reinstall a frsh downloaded compy of 64 bit Itune from Apple Site. and reinstall again and again, went through this process 10 times still having same problem, including now also comes up with AVFoundationCF.dll missing, try to install that won't install.
So now I can not use anything apple, iteunes, safari, update etc, nothing will work, which means I can no lobger sync or update my Iphone 4S.
Does anyone have an answer for me????I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.
Maybe you are looking for
-
All Apple support says about deleting movies from a computer is that you "should" be able to re-download it if you live in the right area. Well, I'm in the U.S.A. and just deleted one of the movie extra features exactly as described in the support d
-
Address book print will not print photo
I am trying to print some of my contacts and I want to print their photo as well. I'e done this before but now, the photo is not included.
-
So from what I can tell, iWeb 08 web templates are pretty hard to come by? Where can I get good ones?
-
BPS - Freezing lead columns in HTML web layouts
Hi all, Is it possible somehow to freeze the lead columns in the HTML web layouts? I know the freezing can be done in the OWC excel in place, but then I can't find how to make the hierarchical display possible for excel in the web? Is this somehow po
-
Hi All, When I am trying to open the employee form from PO Super User i am getting an error. As APP-Pay-060401-You cannot open the form as the Human resources is fully installed. Actually we are not implementing HRMS here. but we have installed HRMS.