I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\&gt;\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&amp;lt;x2settings&amp;gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.  

Similar Messages

  • Java bean, works in Integration Engine but does not work in Adapter Engine.

    In connection to the following thread:
    PayloadZipBean - variable filename inside the archive
    I am trying to use the same bean.
    However I can see, that the bean is working correctly when I use Integration Engine.
    But if I am using ICo (AAE) and using the same bean in the receiver, I can see, that the bean gets called but does not work correctly.
    The audit log added to my bean shows, that the bean could read the filename correctly from the Dyanic Config in the message, but it cannot write the same into the message.
    Could you please help on this?

    Your above posted system details show multiple Java Console extensions.
    You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension, you do not need them to run Java applets.
    See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
    See also http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
    Disable the Java Quick Starter extension: Tools -> Addons -> Extensions
    Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
    You can try a direct connection: <br />
    Control Panel > Java > General tab > "Network Settings...": "Direct Connection" (enable)

  • I am trying to trigger a custom event using a program but does not work ..

    HI ....i am trying to trigger a custom event of a custom object type using a program but does not work. If trigger the same event using SWUE it works.
    below is the code...
    {Key = '0010001115'. "Sales Order Number (hard-coded)
    CALL FUNCTION 'SWE_EVENT_CREATE'
      EXPORTING
        objtype                       = 'ZXXXXXXXF'
        objkey                        = KEY
        event                         = 'ZEVENT'
      CREATOR                       = ' '
      TAKE_WORKITEM_REQUESTER       = ' '
      START_WITH_DELAY              = ' '
      START_RECFB_SYNCHRON          = ' '
      NO_COMMIT_FOR_QUEUE           = ' '
      DEBUG_FLAG                    = ' '
      NO_LOGGING                    = ' '
      IDENT                         =
    IMPORTING
      EVENT_ID                      =
      RECEIVER_COUNT                =
    TABLES
      EVENT_CONTAINER               =
    EXCEPTIONS
      OBJTYPE_NOT_FOUND             = 1
      OTHERS                        = 2}
    Please guide me if i am missing something.

    Hi Sunny,
    I think you should try creating the event using FM SAP_WAPI_CREATE_EVENT.
    CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
      EXPORTING
        OBJECT_TYPE             =  'ZXXXXXXXF'
        OBJECT_KEY              = key
        EVENT                   = 'ZEVENT'
    *   COMMIT_WORK             = 'X'
    *   EVENT_LANGUAGE          = SY-LANGU
    *   LANGUAGE                = SY-LANGU
    *   USER                    = SY-UNAME
    *   IFS_XML_CONTAINER       =
    IMPORTING
       RETURN_CODE             = rcode
       EVENT_ID                = event_id
    * TABLES
    *   INPUT_CONTAINER         =
    *   MESSAGE_LINES           =
    *   MESSAGE_STRUCT          =
    Regards,
    Saumya

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

    I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

    I was premature in posting the question. I found the answer in andother posting, and it was successful.
    Thanks, and sorry for the false alarm.

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

    I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
    Any ideas on how to correct this?
    Thanks-Vitaleyes

    I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset.  My Blueant T1 does support it and plays the music through the deadset.

  • I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    Hi guillermospain,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/PH11143
    Cheers,
    - Judy

  • My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

    My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

    There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
    So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
    If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
    There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

  • Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but onl

    Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession,  You can find details regarding the transfer process at Transfer an Adobe product license.

  • I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

    I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

    Did you set up different email addresses for each device?
    iOS: Using FaceTime
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • I bought Iproxify throught app store and it does not work. I contacted the creator but I have not had any answer. What can I do to get my money back? and please take him down.

    I bought IPROXIFY throught APP STORE and it does not work. I contacted the creator and he has not answered.
    How can I get my money back? and please take him down of your page as we (users) think that we are buying products that worked backed up by MAC.
    Looking forward for an answer in order to keep buying in APP Store

    This article may clear up some confusion you may have regarding third party developers and Apple.
    The Mac App Store Discussion, what is it for?

  • HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

    My passcode is working to unlock the screen but does not work with restriction passcode.
    Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
    Should restriction passcode be different from what i set?

    There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
    Forgot passcode for your iPhone, iPad, or iPod touch, or ...
    Do you have a backup which might not have this restriction passcode? If so restore to that backup?

Maybe you are looking for