I have a mid 2010 Macbook Pro, How can I install Windows 7 without an Optical Drive?

For clarity: I have a mid 2010, Macbook Pro. I recently decided to upgrade to a Crucial SSD drive, double the ram (8 gigs), and remove the optical drive in favor of using my old drive as a back up. I am also currently running Yosemite.
I want to install Windows 7 onto my SSD, using bootcamp. Unfortunately I no longer have an optical drive installed, which makes things difficult as Bootcamp does not even give me the option to create a bootable USB.
Now, this is where things get kinda fuzzy:
MId 2010 macbooks use EFI, and are quite capable of booting from USB. How do I know? Because I booted from a USB drive in order to do a fresh install of Yosemite on my SSD.
I have read mutliple forums and threads with claims that folks have had no problems doing this on 2008 Macbook Pros running Snow Leopard. However, what seemed to be required was some clever .plist modding. I have used both text wrangler, and x-code to do this, unfortunately upon booting of bootcamp, bootcamp instantly crashes. Naturally, I can restore bootcamp because I made backups of the .plist file.
It would seem that modffying the .plist file assumes that the option to create a bootable USB device is grayed out. In my case, it is non existent.
I have also read that folks have had success using rEFIt, however rEFIt has been forked to rEFIned, and the developer of rEFIned made mention on his site that Yosemite handles booting differently than previous versions of OSX.
WIth that, I was hoping that some kind person could explain to me whats going on, what I am missing, and what I can do to make this happen just shy of tearing down my MBP and reisntalling the Optical Drive and dusting off my Win 7 disc.
Also, my Model Number/Bootrom is MBP 6,2.
Thanks in advance!

Thank you for your reply, and the information. This is what I came up with:
I added the strings as instructed, however when I went to sign the script in terminal, I was told:
/Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
/Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
Also, here are screen captures of the lines that I added. Mine are the top string entries:
Thank you for your help, thus far!

Similar Messages

Hey guys I have a mid-2010 MacBook Pro and I am attempting to replace the Hard drive with an SSD and have run into an issue

So after installing the SSD, I tried rebooting into recovery mode and erasing it and was successful, I think at least. Now I am trying to reinstall Yosemite and everytime I go to do it, it says an error has occurred. Does anyone know what I am doing wrong or is there just a step that I am missing? Thanks

https://eshop.macsales.com/tech_center/index.cfm?page=HDDppcintelformat/HDDppcin telformat.html
Start up the macbook and hold down CMD+R. Then choose disk utility from the drop down menu. Partition the harddrive as you would normally using "MacOS Extended Journaled" GUID partition table. 1 partition or more (not current.)

I have a mid 2010 macbook pro laptop can i play a region 2 NTSC format dvd on it without problems?

as said in the titel any help would be very helpful thanks

It would have been useful to know what region you are in!
DVD Player: About DVD-Video Regions
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set he region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Is it possible to go back in time with Time Machine and reinstall Snow Leopard. Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

I have a mid 2010 macbook pro 15" and recently it started crashing so I took it to my local Apple store to have it looked into and they told me its a graphics card issue requiring the replacement of the logic board at a cost to me of $340.

I took my laptop to my local Apple store to have the problem diagnosed and they told me the problem lies in the grpahics card which will require the replacement of the entire logic board at a cost to me of $340.
after that I did some research on the topic and found that this was a massive problem on this model of macbook pro and Apple never issued a recall to fix the issue, are there any class action suits in this category currently underway? if so how can I join?

I also have a mid-2010 Macbook Pro 15". Also, I had paid $100 for Apple Developer account and I can't even use Xcode or Unity3D to work on my game because the moment I write a line of code, my computer crashes. Scratch that, I used to have an Apple Developer account (I let it expire a couple of weeks ago). It hasn't been of much use since my Macbook Pro crashes 15 times a day.\
A month after buying a mid-2010 Macbook Pro 15" directly from Apple, it began to crash. At first, I assumed it was my fault as I had been messing around with Bootcamp and doing other heavy stuff, but I quickly learned it would randomly decide to shutdown regardless of the task at hand. I was very busy at the time. I was a fledgling teacher in France, and I hardly had any time, or money, to put toward a 84 euro train ticket to Paris. Also, OS X updates were around the corner (Lion, Mountain Lion), so I held out, hoping the issue would be resolved with the updates.
During my investigation of the issue, I did find the TS4088 article. It recommended I install some updates, and then it described a problem that seemed similar to my own, but the order in which the problems occured, as described in the TS4088 article, did not follow the same pattern that my computer had been experiencing–there was no gray or black screen after the restart warning message when my mac crashed. The first time I found TS4088 on Apple's Support page (at a time when their product recalls were easier to locate before they redesigned their website), it was a couple of months after I had bought the computer. I reasoned that my Macbook Pro must not be suffering from the same issues as I had never seen the video freeze or go black before seeing a restart message. The restart warning message is the last thing I saw, no loss of video or black(or gray) screen afterwards. My computer would simply start to boot up again.
About two years after buying the computer, and suffering from about 3 GPU panics a day, I searched for the TS4088 article again, wondering if I had misread it, and that maybe the issues described in the article were the same issues I was experiencing. This time I could not find the TS4088 article on Apple's Website. I searched over and over again, but it was nowhere to be found. I assumed that issue had been resolved and the article removed. Now after three years of using a faulty, unreliable computer, I was feeling like a schmuck. I searched again on Apple's website to find the TS4088 article, or any new ones that outlined my very apparent GPU issues, but I had no luck. I circled Apple's website over and over and could not find that article. It was only through a link other frustrated mid-2010 Macbook Pro owners had posted on some other website that I found the link to TS4088, also learning that the forum's users were experiencing my same problems.
Based on the language Apple used to describe the problem, I did not reason that I was suffering the same issue. Here's what happens when my computer crashes:
     • The computer seems to shut down. The display turns off, the fans stop spinning
     • The message "Your computer was restarted because of a problem . . . Press any key to restart" is displayed.
     • I press any key, the computer restarts, I wait for next crash to interrupt my work
Excerpt from TS4088
"Symptoms
Apple has determined that a small number of MacBook Pro (15-inch, Mid 2010) computers may intermittently freeze or stop displaying video on the built-in display or on an external display connected to the MacBook Pro. In this situation, you may also see a restart warning message before the video is lost or the display turns black or gray."
My computer never displays a restart message before the video is lost or display turns black. My Macbook Pro mid 2010 loses the picture on the display, and less than a second after that is the restart warning displayed. The video would never freeze or stop playing, rather the whole computer just dumped all of its processes and displayed a warning message asking me to press any key to restart.
My issues with this problem are the following:
•The problems described in TS4088 do not accurately reflect what users are experiencing. TS4088 is misleading in this respect.
•The article TS4088 was not easy to find on Apple's website. It seemed to have moved to an obscure, impossible-to-find location that could only be found thanks to the great number of other Mac users who are experiencing the same problem.
This issue hasn't been managed dutifully. I'm annoyed to have sunk money into a developer account. I'm annoyed that I sunk money into an expensive product that does not work. I'm annoyed that the description of the issue afflicting mid 2010 Macbook Pros was inaccurately and misleadingly described and that links to the TS4088 article disappeared from Apple's website when I could have truly benefitted from them. I am especially annoyed that my life in graphic design, web development, and iOS development has stagnated for several months as my computer crashes some 15 times a day. I am, however, pleased with the speed at which a Mac can boot up.

I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?

I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?

You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

I have a mid 2010 macbook pro. I want to change my hard drive but...

But I purchased and downloaded Mountain Lion. Plus I have stuff installed and can't find the original install medium. (I have some product keys, but not the medium.
If I pull original drive and plug it in to a drive enclosure, can I put new drive in, boot off drive encl, somehow restore from the old drive to the new?
I don't have that much on the old drive. so even though I am planning to go to an ssd It will be big enough to hand what I currently have on old drive with as much left over as will go on it.
Eventual plan is to use the original drive as a second drive when I replace my defective optical drive. (have to find a drive enclosure that lets me do that. But I heard it has been done) Already yanked the optical drive out.

Buy the new drive, temporarily put it in an external enclosure, clone your existing drive to the new external (Use CCC), boot to the clone and verify it is OK. Remove new external from its case, remove the internal drive, swap them, the old internal can go in the case and be used for extra storage, the new external goes in your Mac and becomes the new internal.

How can I install CS6 without a disk drive?

Hi there!
I recently purchased the Creative Suite 6 Design and Web Premium addition.
The sales person at the store assured me that despite not having a CD drive in my Macbook Pro there would be a way to install/download the suite with the product information in the box.
So far, all I have been able to acheive is recovering my serial code. I am compeltely at a loss of how to even begin to start the install process without the a disc drive.
Is this possible or did the sales person send me down the wrong road?
Thanks in advanced!

Hi Emma_Rose,
Welcome to Adobe Forums.
We apologize for the inconvenience caused to you.
Please use the below link to download CS6 Design & Web Premium.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Thanks

Hi,i have macbook pro ,,how can i install snapchat for my mac

how to install snapchat for macbook pro

I don't think Snapchat offers an app for the Mac; however, there is a third-party alternative: "Snapped" http://thnkdev.com/Snapped/
This is a THIRD PARTY OPTION.

New MacBook Pro - How Can I install Snow Leopard?

I have a brand new MPB from Apple that comes with Lion pre-installed. I didn't ask for this, even though I ordered the computer a few days before Lion came out.
Lion has been a disaster, from random crashes, to breaking software (including Apple's own Motion and Cinema Tools), to draining the battery after 3 hours or less. Does anyone know of any way possible to put Snow Leopard on this computer? I have the SL install disc (10.6.3), but I get an error message that it cannot be installed. If I try to start from he disc, I get a kernel crash.
Thanks for any suggestions.

I am not sure if you will be able to go back to a lower OS if could be built into the firmware to not let this install happen. You can give this a try, You will need to start the system with your Mac OS X 10.6 snow leopard dvd then format the drive with disk utility, then do the install.

Upgrading hard drive in mid 2010 MacBook Pro

I have a mid 2010 MacBook Pro and was looking to upgrade the internal hard drive.
I saw several suggestions on here and with that I found two hard drives.
I just didn't know which would be better or what the differences between them were.
The first one is this:
http://www.amazon.com/HGST-Travelstar-2-5-Inch-7200RPM-Internal/dp/B0097LG9U8/re f=sr_1_1?s=pc&ie=UTF8&qid=1393716348&sr=1-1&keywords=hitachi+1tb+internal+hard+d rive+2.5
And the other one is this:
http://www.amazon.com/HGST-Travelstar-2-5-Inch-Internal-0J22423/dp/B00B4QESVQ/re f=sr_1_3?s=pc&ie=UTF8&qid=1393716348&sr=1-3&keywords=hitachi+1tb+internal+hard+d rive+2.5
I was just wondering if these two are just the same thing or if they are different?
If they are different which would be the better choice?

Mattress6450,
I don’t know if they’re ultimately the same drive or not. The first drive (HGST part number 0S03563) is sold at retail as a “mobile internal drive kit”, and the second drive (HGST part number 0J22423) is sold at retail as a “mobile hard drive”. They’re both SATA III, 2.5-inch form factor, 7200 RPM, 1 TB hard drives with three-year warranties. You’ll need to dig around the technical specifications at hgst.com to see if there are specific technical differences between them.

How do I fix lag on Mid 2010 MacBook Pro 13"?

I have a Mid 2010 MacBook Pro 13'' and lags often. I empty my rubbish bin every time its full, I close programs that are not in use at the moment and even refresh once in a while. For example, I only use Google Chrome and its still lagging even though I dont have any prgrams running. I also checked my stroage to see how much free space I have which is 450.75 GB free. What do I do?

Hi mighty-hawk23,
Welcome to the Support Communities!
What version of the Operating System are you running?
Here are some troubleshooting steps for Mavericks:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Other troubleshooting steps include Resetting the SMC and PRAM:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
And using Disk Utility to verify and/or repair the disc:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417
Disk Utility
Start from the Recovery System or Internet Recovery (OS X Lion or Mountain Lion).
If your computer shipped with a Mac OS X Install disc, insert the installation disc, and restart the computer while holding the C key.
If using a Recovery partition or Internet Recovery (OS X Lion and later): When your computer finishes starting up, choose Disk Utility from the Utilities window.
If using an installation disc: Choose Disk Utility from the Installer menu.
Important: If you started from an installation disc, do not click Continue in the first screen of the Installer. If you do, you must start from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
Hope this information helps ...
- Judy

How to connect my Mid 2010 Macbook Pro to my HDTV?

I have a mid 2010 macbook pro with a mini display port. I want to display it on my hdtv. I tried a mini display port to hdmi adapter first but that wouldn't work so then I tried a mini display port to dvi adapter connected to a dvi to hdmi adapter but still no success. Any ideas?

I have your same model and I'm using a mini display port to hdmi when I want to connect right to a TV. Is it not detecting, or is it a blank screen etc? What TV are you trying to connect to?

Mid-2010 MacBook Pro stuck in clamshell mode?

I asked a similar question to this earlier, but now the problem has been more consistent. I have a mid-2010 MacBook Pro that I often use with an external display, plugged in via mini-DVI to HDMI adapter. The problem is, after I've unplugged my macbook to "go mobile" and am away from my display, if I ever have to restart my computer or boot into Windows 7, my computer will think it's still in clamshell mode. The screen will stay dark, and if the lid is closed, the white light will stay on steadily, not pulsing. However, if I plug into my external display when this is happening, the external display works fine and I have a display again. When I look up my displays while connected to an external display while this is happening, my internal display isn't even listed in the system report; it's like it doesn't exist! And this is especially a problem now as I am away on a 3 week school related trip.
I have not been able to consistently reproduce this problem. Sometimes it restarts normally, sometimes I restart it and get the gray + apple logo screen that then goes dark, and sometimes the internal display just never turns on. The problem doesn't seem to be related to an OS, as it happens when booting into Windows 7 OR mountain lion 10.8.5. I've tried resetting PRAM mutliple times as well as performing an SMC reset multiple times, and neither has helped. This even happened when I was booting into a mountain lion install USB, as I thought maybe a fresh install would help. I've seen many other forums discussing a similar issue, but none described quite like mine.
What gives?? How can I get my macbook to restart normally? I really don't want to have to make a repair, even though it's looking like a hardware problem. My computer is one month after Apple Care has expired, and I can't afford a pricey repair as I'm a very in debt student who only has a MacBook because his school gave it to him in the first place. I would be very appreciative for any suggestions and/or help! Thanks!

Hello thedoctor8706
Reset your NVRAM and test to see if that resolves your issues. Typically that will resolve video, volume, startup disk selection, and kernel panic issues.
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Mid 2010 Macbook Pro will not stay off or asleep

Hi,
I have a mid 2010 MacBook Pro will not stay turned off when I tell it to shut down. It will shut down just fine, but a few seconds later it will boot up again. This also happens when I try to close the lid (or just put it to sleep), it will work fine, screen/Apple logo on the back will turn off and the status LED will slowly pulse. However a few seconds later, the LED stops pulsing and the Apple logo will illuminate. If I open the lid I will be greeted with the log in page with zero delay (i.e. its been displaying for a while).
This has become problematic because the computer always be running. If I put it in my laptop bag the computer will get hot as ****. The only way to get it to really turn off is to let the battery die or remove the battery. But this computer does not have the externally removable battery so that is not a trivial process.
The symptoms exist in both Mac OS (Mountain Lion and Maveriks) and Windows 8/8.1. This makes me believe its something in the hardware (or at least a setting in the hardware), not software (I know Apple doesn't care what Windows does, but it is exibiting identical behavior).
I have reset the NVRAM and the SMC with no luck. When I reset the SMC I didn't get a good indication that anything happened though, and was wondering if that is normal. Resetting the NVRAM results in another restart, while its hard to tell if you actually reset the SMC. I reset the SMC by turning the computer off, then holding the power button when it tries to restart (this usually gives me a few minutes where the computer will actually stay off), then pressing shift, control, option and power at the same time and releasing them at the same time. This is how the Apple documentation said to do it. They did not mention how long the must be held though so I presume that doesn't matter.
Anyone experience this/have any ideas?
Thanks,
Jim

Btmm error "can not coonnect to cloud server" Facetime and IMessage " Could not sign in, check your network connection and try again". Which I have again and again...

I have a mid 2010 Macbook Pro, How can I install Windows 7 without an Optical Drive?

Similar Messages

Maybe you are looking for