I have a Mini DisplayPort to VGA adapter, then I purchased 3 VGA adapters: a VGA to HDMI, VGA to Component, and VGA to RCA. When I hook them up to my TV (I've tried multiple TVs) they do not detect a display, even when I click Detect Displays.

Does anyone have any suggestions on a solution for this? The only other Mini DP I found was a HDMI connection. I want to make sure I can connect to not only TV's via HDMI, Component or RCA, but also projectors (some of which may be older requiring a Component or RCA connection).
I'm using this Mini DisplayPort:
http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA3Ng&mco=MTA4NDU0NjA
These are the VGA Adapters I'm using:
VGA to HDMI:
http://www.amazon.com/gp/product/B001OLCHJ6
VGA to Component:
http://www.amazon.com/gp/product/B000P3Q0YW
VGA to RCA:
http://www.amazon.com/gp/product/B000Y7T5UU
Any help would be greatly appreciated.

None of the three lower adapters pictured in your post will do you any good with your MBP.
1. The VGA-HDMI adapter does the reverse of what you want: it yields VGA output from HDMI input. The opposite is not possible; a VGA input does not contain all the information necessary to create an HDMI output. You'll have to get a direct mini-Displayport-to-HDMI adapter instead.
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?mco=MTY3ODQ5OTY
2. VGA-Component: Lots of posters here when the MDP-equipped MBs and MBPs first came out tried adapters like this one with no success. What does work with the MDP (and a VGA adapter) is a converter box like this:
http://www.amazon.com/Startech-Component-YPbPr-Video-Converter/dp/B000G6Y0S6
3. VGA-Composite: This doesn't work with MBPs either. For Composite or S-Video output, you need a converter box like this:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2
or this:
http://www.startech.com/AV/Converters/Video/High-Resolution-PC-VGA-to-TV-Convert er-with-Remote-Control~VGA2NTSCPRO
These converter boxes will work fine in combination with your Apple MDP-VGA adapter.

Similar Messages

Mini DisplayPort to DVI Adapter is actually DVI-D? *** Apple!

I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
What a rip.
That said, does anyone know of a REAL MDP to DVI-I adapter? Do I need to buy the dual-link adapter?

I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
They do say that it is for a "digital monitor, ... that includes a DVI connector."
<http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NTE>
That said, does anyone know of a REAL MDP to DVI-I adapter?
No.
Do I need to buy the dual-link adapter?
If you are going to use a 30" DVI display. It's still DVI-D (but dual-link). It will also work with single-link DVI displays.
For a VGA display you need the Mini DisplayPort to VGA adapter
<http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg>

Mini DisplayPort to DVI Adapter - Monitor not recognizing

I have a new MacBook purchased last month from Apple to replace an older MacBook. I used a Scepter X20 monitor on the previous MacBook with an adapter with no problem. With this new computer, I had to puachase a Mini DisplayPort to DVI Adapter. I plugged it in as I did for the other computer, and the monitor doesn't recognize it at all. I checked the monitor by plugging it into another Mac (older version) with adapter and it works fine. Why will my Mac not recognize the monitor or the monitor recognize that it is connected?

On the very slim chance this might be problem, it happened just last week to another poster and it's happened to me, the mini display port really takes a good shoving into the graphics card. Sometimes it will look perfectly seated in there, but it's not quite.
Aside from throwing that out there, I would think if that wasn't the case, you may be having problems with the adapter itself. The whole mini display port is ridiculous in itself, but the two lessor expensive adapters I bought from Apple worked very poorly anyway. And on Apple displays!
The $99 dollar one Apple sells has a reputation for working the best, but I haven't tried it. There are also devices now, still pretty expensive, that seem to bypass those altogether.
I can't say if some other issue is going on or not, there may be. But just know you're not alone in having display problems of this kind.

Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?

Hi,
I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output?
If yes, should I get any specific DVI-to-HDMI adapter?
If yes, will it have sound with it?
Thanks.

So which does the community prefer between Dr Bott DVIator and the Apple DVI to ADC? I have the Apple but it is not working, as it is shutting the monitor down without even starting it (soft shut-down). Is this a bad adapter or the result of "stacking" adapters? I have read that it is more common to a bad adapter result.
Thanks.

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Does Mini Displayport to DVI adapter support analog VGA signal?

I'm just about to buy a macbook pro. Since the MDP (mini displayport) to DVI and MDP to VGA adapters are £20 a pop, I can only afford to get one. Obviously DVI is better in general, but VGA supports more older hardware, CRTs, and the spare VGA input on one of my displays (where the desktop uses the DVI).
What I'd like to know is does the MDP to DVI adapter also support the analog VGA signal on certain pins (like most physical desktop DVI ports do)? If it does, since I have about 3 or 4 DVI to VGA adapters lying around, I can get the MDP to DVI adapter and use the DVI to VGA adapters with it if necessary, but if it doesn't I might be better off getting the MDP to VGA...

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

Trouble with 30" HD Cinema Display using Mini DisplayPort to DVI Adapter

I bought a new MacBook Pro and I am having trouble getting the full resolution to work with my 30" HD Cinema Display (purchased in 2007 max resolution 2560 x 1600) using a Mini DisplayPort to DVI Adapter.
According to the specs page, http://support.apple.com/kb/SP581 , the max resolution of the HD external display is supported. Unfortunately the max that I can set it to is: 1280 x 800
Has anyone else had the same issue?
If this isn't resolved I'm likely going to exchange my MacBook Pro for one that can support this display.

So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter as suggested and it seems to work great.
Now the problem that I have is when I open up Apple's DVD player, the screen is blank but I can still hear audio.
If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
Any idea what this problem might be??
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3532
gMux Version: 1.9.22
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version: 1.03

New Mac Book Shuts Down when I plug in the Mini DisplayPort to DVI Adapter

I have a new 15" MacBook pro and every time I plug in the Mini DisplayPort to DVI Adapter, it shuts down. I installed the Mini DisplayPort to VGA Firmware Update (http://support.apple.com/kb/dl799) and it still shuts down. It shuts down whether I have a display/projector plugged in or not.
Any suggestions???

Try turning the MBP off before you connect or disconnect an external monitor. I could be wrong but I do not believe that the DVI interface was designed to be a hot swap interface.

Question about Mini DisplayPort to DVI Adapter

I want to transfer the display from Dell XPS 15 to Dell ST2220M monitor.
Purchased a HDMI - DVI cable from ebay and tried using it. The laptop shows the monitor name but the display doesn't get passed onto the monitor. The monitor reads "No DVI-D cable".
Does anyone know if Apple Mini DisplayPort to DVI Adapter works in my case?

srikat,
Welcome to the Apple Discussions. You will have better help from people who read the questions in the laptop section. Check this location and see if you get a better response.
Check Here
Jim

Mini Displayport to DVI Adapter Problem on Mid-2009 Macbook Pro

I have a new mid-2009 Macbook Pro hooked up to a 20" Samsung 2033sw LCD with a native 1600x900 resolution using a mini Displayport to DVI adapter that I bought off of EBay. No matter what I've tried I can't get anything to display on the external Samsung LCD higher than 1024x768. I tried switching between GPU's and that made no difference. Any ideas.?

Michael, thanks for the reply;
When you open System Preferences/Displays does a second preference panel open up OK on the Samsung ?
Yes, but I can't see it unless I select 'gather displays'. Then it appears on the MBP LCD, and showing the correct resolution - 1600x900.
Is there an Options Tab visible under which you can check 'Overscan' ?
None that I can find. Only display and color tabs.
Is the Refresh Rate set to 60.0 Hertz
Yes, that is what it shows in Refresh Rate.
I also pulled out an older LG LCD that is fairly generic, .e.g. it has DVI in at 1280x1024. Same problem on that LCD ... nothing higher than 1024x768, but this time at 1280x1024 I get major noise and screen distortion. The displayed image is jumping all over the place, but at least there is something displayed.

Mini DisplayPort to DVI Adapter not being recognized...

I wanted to run two monitors off my Mac Pro - a Dell S2409W and an LG Flatron L1920P. Forget for a moment the ugliness of this set up, if you will. My problem is whichever monitor I connect to the mini displayport to DVI adapter isn't recognized. When I go to the Display preferences and click 'Detect Displays', I'll only get whichever display is connect to the DVI out.
All the cabling I have here is DVI-D. And the adapter is brand spanking new. I've tried the different combinations of booting the machine, then turning on the displays, turning on the displays then booting the machine, etc.
Does anybody know what I'm missing here?

Hi,
Do you see the adapter you have listed here?
http://store.apple.com/us/browse/home/shopmac/macaccessories/displays?mco=OTY2ODUwNQ
Supposedly the one that works the best is the $99 one. Imho, that mini-display port has been a problem from the start. Some companies are offering products as work arounds, such as Griffin. The ones I've seen are pretty pricy though.
Oh, there is one thing, pretty remote maybe, but I found that the plug that goes into the card has to be nicely shoved in there. I've put it in thinking it was all the way in and it wasn't.

Does Mini DisplayPort to DVI adapter output sound?

I am using the Mini DisplayPort to DVI adapter, like this one:
with my Macbook Pro 17-inch, Mid 2010.
I also happen to have a DVI to HDMI cable that I tried to connect to my Samsung LED TV (2014 yr.)
The picture that I get on TV from the screen mirroring from the Mac is great but I don't have any sound. So I'm curious if DVI could be killing the sound in this case? Any ideas?

I don't think the DVI standard carries sound, so while Mini DisplayPort can handle audio, DVI probably won't carry it any further.
Does your TV have an unused HDMI port? MacBook Pros after a certain version do send audio out of Mini DisplayPort and the audio can be carried through HDMI to a TV or receiver. HDMI would be preferred over DVI for this reason, unless your MacBook Pro is too old. If it is, then with either type of connection you would need a separate audio cable connecting the audio-out on the MacBook Pro to an audio-in on the TV.

HT5299 My MacBook Pro doesn't have a mini DisplayPort

My MacBook Pro doesn't have a mini DisplayPort what can I do so that I can use my Cinema Display?

You have a Dual-link DVI port. Try Monoprice to see if they might have an adapter.
Clinton

I have a Mini DisplayPort to VGA adapter, then I purchased 3 VGA adapters: a VGA to HDMI, VGA to Component, and VGA to RCA. When I hook them up to my TV (I've tried multiple TVs) they do not detect a display, even when I click Detect Displays.

Similar Messages

Maybe you are looking for