I have a mini iPad with which I take pictures and capture video. In order to see them on my home tv I bought an Appletv and HDMI cable and connected it to my home tv, Now I can see the pictures but not the video.Solution please?
How can I view on my home TV videos that I captured with my mini iPad?
Hey andrikos175,
Thanks for the question, and welcome to Apple Support Communities.
You are on the right track, you'll want to AirPlay these videos to your Apple TV. If you are having issue with AirPlay, please see the following troubleshooting resources:
Using AirPlay
http://support.apple.com/kb/HT4437
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Thanks,
Matt M.
Similar Messages
-
On my iPad I can see in mail only the headlines of the mails but not the text - why?
On my iPad I can see in mail only the headlines of the mails but not the text - why?
Try closing the Mail app completely and see if the text shows when you re-open the Mail app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot -
Trying to attach pdf files to emails I'm sending to myself. Instead of attaching the file, it copies the text. I want the file so I can have it on my iPad. I've been able to do this in the past, but not the last two tries. What am I doing wrong? Thanks.
You aren't doing anything wrong.
If the PDF is short enough, your iPad Mail app will display the text as part of the mail.
Actually it is still an attachment.
Tap and HOLD on the text and you should see options to "Open In..." that will allow you to open the PDF in most PDF readers such as iBooks, GoodReader, etc. -
Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet. -
How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.
Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).
-
I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor
I'm keen to know if you get a response to this. I've been running Elements 12 for a year now, and suddenly my Editor is not working. I'm running Windows 8.1 and just get a message that says "The Editor is not working". Not very helpful.
-
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Document library: user can see the metadata but not the file itself
Hello,
For a specific document library certain users will have the right to see the metadata but not the file itself. The only solution I can think of is using a http handler. But I don't know if I can get the user that requests the document.
Are there any other approaches to this requirement?
Can I get the username of the user that makes that request?
I guess that http handler is deployed at the Web application level - am I right?
Thank you
ChristosNicolas, thank you for your answer.
I think this this is not a strong protection. Everybody can istall sp designer or go through UNC path, like \\myserver\documentlibray or \\myserver\lists\mylist and see the documents- and we use unc paths a lot. I don't want to get into trouble when a (wiki)
leak is made.
Christos -
I've tried everything I can think of to get my Iphone 4S to play albums like an Ipod does. All it ever does is play the songs but not the albums in alphabetical order. I used to think I was reasonably intelligent until I butted heads with this phone.
Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.
-
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it. -
I have just recently bought a MacBook Air. I am looking for an email which I put into a folder on my Mac Pro. The smart folders have come across to the Air, but not the 'On my Mac' folders. Are they lost?
Are you sure that the "On My Mac" folders weren't empty? If all your mail accounts are IMAP, they may have been.
-
I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.
I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!
-
As it say's above i need to delete some of my oldinvoices/estimates from my files in pages, i can get rid of the text but not the whole file, thanks Dennis
You locate the file in the Finder(it's in the Documents item of the sidebar by default), drag it to the Trash, and empty the Trash.
(59926) -
I can only backup the datafiles but not the control files and SPFiles
Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qianthe string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen
Maybe you are looking for
-
Generating Alert Message XML file and placing it in Queue
Hello Team, I want the alert mechanism to generate the Alert file in XML format and it should be placed in the Queue it is the requirement of the client and it should be done without the help of the BPM can any one suggest me is this scenario can be
-
Error in versa add on Is_select Phase
Hi All, In the phase Prep_extension/IS_SELECT i have three options for moving ahead with VIRSA add on. 1) upgrade to the latest version of VIRSA . 2) keep the same version 3) delete the package. Here are the issue i have with each one of them 1) I a
-
I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of th
-
Hi, I do a Snapshot on SE6140 Data Volume and mount across SnapShot Volume on the Backup host for backup. If I have to snap back the data from the SnapShot Volume due to the corruption of the data.How to perform on CLI or Gui to snap back the from th
-
HELPPP !! URGENT Motion detect with a webcamera !!! PLSSSSS
I tried but none of the exemples work . I need a simple vi that detects motion and a green light is on when that happens . The method is not important the easyer the bether (treshold is easy not STEI or segmentation). Thanks