I have a model 1,1 Mac Book in the black case. How can I transfer about 30 GB of stuff to a MacBook Pro running Yosemite? Can't do a Thunderbolt transfer. The Seagate backup drive I bought doesn't support 10.5.8. Thank you.
How do I transfer 30 GB of stuff, mostly text documents, bookmarks and a few hundred photos from a MacBook model 1,1 in the black case, purchased in (2007?) running Leopard 10.5.8 with a 667 bus, 2 GB, 256 GB to a MBP 13" Retina running Yosemite 10.10.1? Using Migrate is out. Discovered after I bought it that the Seagate Plus Backup for Mac does not work with 10.5.8. OnetoOne recommends backing up my data before I do that, which seems like a good idea. Have a 801.11 n Time Capsule that also isn't working so that is not presently an option. Thank you.
The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.
Similar Messages
-
I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)
Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .
there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc. -
Have old MacBook Pro running tiger 10.4 want to save date to external hard drive and buy newer MacBook and still use same drive. Any suggestions, most WD drives say nothing about os tiger 10.4. The OS compatibility is much newer on the data. Totally confused. Not a computer person.
I haven't checked reviews recently but there's a difference between bare drives and drives with enclosures. Western Digital made some of the most reliable drives last time I checked, though the enclosures weren't all that great. It is convenient to get both in one package but I usually buy a highly rated enclosure and then put a highly rated drive in it myself. OWC sells some good enclosures but if they put a so-so drive inside of it then the package is only as good as its weakest component. If you get a package from them, ask them what drive is inside (some vendors have no idea what's inside - went to an Apple Store recently and they couldn't tell me what was inside some of their Apple brand enclosures). My first thought if buying a new drive would be to buy a OWC enclosure with a WD drive, but chek around because I may be out of date.
10 years ago Seagate was one of the best drives. Now they rate poorly in reviews. -
I have a 2011 MacBook Pro running Yosemite 10.10.3, and Safari V8.05. I want to reset Safari, but there is no reset in the Safari drop-down nor is there a reset in the Preferences - Privacy window. Any Help out there?
Hi, thanks for the response. I have searched online and many posts say to reset Safari all you have to do is click on the Safari icon, then select reset from the drop down menu, or find the reset button in the privacy window in preferences. My system has neither options. My Safari had been hijacked (frozen) by a pop-up. I cleared all history, cookies, cache, etc. with the wifi off, and it seems to have worked so far. Many posts said to reset Safari, and I don't seem to have that option.
Thanks again. -
How do I get Adobe Creative Suite onto my new MacBook when there is no CD drive?
Which version of Creative Suite?
Downloads are here:Download and Installation Help
You'll need your serial number to activate the software after you install it. -
HT1750 my macbook pro does not store a file in my 1 tb seagate hard drive
my mac book pro does not allow to store a file in my 1tb seagate hard drive, anybody has an idea?
One idea would be to post in the MacBook Prof forum, this forum is the iMac forum.However as long as you're here can you provide more information, are you referring to a specfic file, where are you attempting to save it on your HD and what type of file is it?
-
My Macbook Pro keeps updating iPhoto and iMovie between the version compatible with Yosemite and the previous versions. It does it at least daily. Why doesn't the App store understand when those two programs have been updated?
My Macbook Pro keeps updating iPhoto and iMovie between the version compatible with Yosemite and the previous versions. It does it at least daily. Why doesn't the App store understand when those two programs have been updated?
-
After it messed up the prior version How do I get firefox 4 to install on my Macbook Pro?
I have a new MacBook Pro. I successfully transferred my Firefox and Thunderbird from the old laptop. Then when the 4.0 version appeared on my screen, I tried to download and install. Now I can not open Firefox from the dock. It says you don't have permission to make changes. There is the small screen that asked you to drag the icon into the application folder for both Firefox and Thunderbird. It will not let me do it. At the top of the screen it says I have no space.
You don't. The HDMI socket on your MacBook Pro is an output, not an input.
What content source are you wanting to view? Your MacBook Pro may be able to view it directly. -
I have a 2012 MacBook pro running Yosemite that will not power up. Any advice?
I Am unable to power up my macbook pro. It has been working fine up to this afternoon. I was using it, stepped away and when I returned it was off and I am not able to get it to turn on. I have tried switching power sources but nothing seems to work. I would appreciate any advice
Hello Jlearoyd and welcome to Apple Support Communities,
First try resetting SMC,
Reset SMC
http://support.apple.com/en-us/HT201295 -
I don't seem to be able to change the permissions on my Seagate 1TB Expansion Drive from read only to read and write.
Are there expansion drives compatible with both Windows and Mac as I have a Windows computer at work and use my Mac at home?
ThanksIt is a question of formats. That drive probably is formatted for Windows. You will have to reformat it to ExFAT on the PC, then it will work both on the Mac and the PC.
REFORMATTING ERASES ALL DATA ON A DISK!
There is a software option which will allow you to write to the HDD with reformatting:
http://www.paragon-software.com/home/ntfs-mac/
Ciao. -
Please help!! I have a Macbook Pro, running Yosemite. Lightroom 5.7
Whenever I try to add music to a slideshow, it shuts down the program.Try resetting your SMC and NVRAM before attempting to install again.
Resetting the NVRAM/PRAM
Note: This will not delete any data.
The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Turn on the computer by pressing the Power Button.
On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
Release the keys on the built-in keyboard.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin -
As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections. -
I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
many thanks Carl.You must boot from another drive in order to erase the system drive.
Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
Allan -
I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
Any ideas ...Please!Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?
Maybe you are looking for
-
Multiple users using same email account
I'm the computer tech for a volunteer fire department. We have multiple officers using this computer and each one wants access to the same email account under their personal user accounts. Can this be done?
-
Is there a way to force my Mac to rescan for a harddrive?
The hard drive I use for Time Machine sometimes won't remount after plugging it back in to the Firewire port on my Macbook Pro. If I open disk utility it's not even acknowledged as being connected. The only way I've found to get it to remount is to p
-
"Adobe Dreamweaver PHP Training from David Powers
"Adobe® Dreamweaver® CS5 with PHP Training from the Source David Powers Lesson 7 Validating Input on the Server I have reached page 445, and become completely stuck - I've been about three weeks trying to sort the problem but cant get anywhere. Not
-
Problem Related to Text Field in PR?
Hi All, I have to Pic Text field from PR. PLease Tell me in which table its entry goes?
-
USB 2 external hard drive won't mount on my G4 dual 450
I had a problem with my Intel iMac and had to take it for service. I tried to hook up the lacie usb 2 external drive that was my backup for the imac to my G4 but it won't mount (using the built in usb 1.1). I also have a usb 2 and firewire card in th