I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X 10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

I see printer drivers from Canon for that printer for OS X 10.7. but not scanner drivers. If the MF4140 is not recognized by the Image Capture application and Canon technical support cannot offer any assistance, all I can think of to suggest is to try a third-party scan application such as VueScan:
http://www.hamrick.com/vuescan/vuescan.htm
They offer a free trial period so you can see if it works with your Canon.
Regards.

Similar Messages

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
mechanical fault , contact Apple for service and parts replacement.

My mac book air no longer supports the audio speakers on my panasonic tv when playing movies? what has changed in the last week for this not to work any more?

I used to be able to plug my mac book air to my tv via mini dvi to hdmi cable to tv and watch movies.
The audio no longer projects through the tv? in system preferences, sound, driver for sound output is not supported for my panasonic tv.
Just a couple weeks ago this was not a problem. I just plugged in my computer to the tv and it worked. what has changed?

Have you tried a PRAM reset?
http://support.apple.com/kb/HT1379
Ciao.

HT3258 My Outlook 2011 for Mac search feature is compromised since updating to Mt Lion. It will only search new messages or contacts. Is there a fix for this?

My Outlook 2011 for Mac search feature is compromised since updating to Mt Lion. It will only search new messages or contacts. Is there a fix for this?

Sync Outlook Mac with iPhone: http://lmgtfy.com/?q=sync+outlook+mac+with+iphone

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Do you know a fix for this?

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

I've recently been given an eMac, but when I try to boot it I get the following- panic(cpu 0): Unable to find driver for this platform "Powermac 4,4"

Recently I was given an eMac that had been sitting in a cupboard for a couple of years.; When I tried to power it up I was getting all kinds of noise at first. I checked all connections that I could, then checked that the memory was correctly inserted into the memory banks, they wernt, so re fitted them then all the weird noises went.
Now when I try to start the Mac I get the first chime then the machine stops with the following error message . . .
panic(cpu 0): Unable to find driver for this platform "Powermac 4,4"
I've been away from Mac for a few years now and would love to shove my PC back in the cupboard where it belongs, so if someone could help me get my eMac going I'd be real happy,.
Thanks

It appears to be one of these...
http://www.everymac.com/systems/apple/emac/specs/emac_1.0.html
http://www.everymac.com/systems/apple/emac/specs/emac_800_ati.html
Actually, either one can run 10.5.8
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
May be available from Apple again???...
https://discussions.apple.com/thread/4720126?tstart=0
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html

How to get 2 gb on desktop, can i use g drive for this?

I'm attempting to install Yosemite but its stating I need 2 gb for this can I use m external G drive for this or do I need to get 2b installed?
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 1 GB
Memory: 1 GB

The 2 GB requirement is memory, not storage space. 1 GB of memory will not run Yosemite let alone apps and Yosemite. Your model of iMac can use 6 GB of RAM. If you expect to use Yosemite and any apps with any efficiency upgrade your memory to 6 GB with a 2 GB and a 4 GB module. The most reliable and dependable suppliers of memory for Macs are Crucial.com and otherworldcomputing.com. I've found that Cruicial.com is usually a little less expensive.
Here's what Crucial has for your Mac:

I can't connect my canon mp160 to my new apple iMac desktop. It just won't print although it comes up as the printer. there is no driver for this from canon who states that I probably don't need a driver for this

I can't connect my canon xp160 to my new IMAC. It does recognize it but won't print. there is no driver for this as per Canon and they state that I may not need one. thanks!1

If you want to print, then you will need a printer driver. There is no printer driver available from Apple for the MP160. And the last driver that Canon released for this model was for OS X 10.7. You may be able to install this 10.7 driver, although it is not digitally signed so Gatekeeper will block the installation. To get past Gatekeeper, you can hold down the Control key and click on the installer. A pop-up menu will appear. Select Open. You will then be given the option to install the old driver.
With the driver installed, add the printer via Printers & Scanners and see if you can print.

I have a 2nd gen Mac book air with Lion. The hard disk has filled up even though i keep my data , music etc on hard drive . I used disk inspector to find where problem was and it is 20GB in the hidden files under the user directory can i resolve this ?

I have a 2nd Gen MAc book Air with Lion . The 60GB hard disc has quickly filled up despite me keeping most of my data on a portable hard drive . I used disk inspector to locate the problem but found that it was was in 20 GB of hidden files in my user directory . Is this correct and is there anything i can do about it ? Using disk inspector you can not see individual hudden diretories or files. I did unhide them but there is a mass of diretories etc and so no way i could see if this is one or multiple files using the space. Library System and Applications are at 4 3 and 3 GB respectvely. The data I actually keep on there is 9GB Thanks for any help

I think the problem is Quick Time Player. I am using OS 10.6.8 by the way.
I tried it out again.
I had about 26 GB of space before I played an .avi video.
After the movie started to play (it was slow to load), I got a warning message that my startup disk was full. I opened Disk Utility and it told me I had no space left (about 20 MB or something like that was left).
I watched to the end of the movie.
Then I quit Quicktime Player.
And I shut down the computer.
I turned on the computer and checked Disk Utility. I have about 26 GB of space.
I think for some reason Quicktime Player uses up a lot of the disk space when it runs movies that are problematic. This movie I was watching did not open with vlc.
I normally use vlc to watch movies.
Probably it doesn't use up this much space when the movie is OK.
I think there's a problem with this particular movie. It is about 50 MB so it's not that big a file. I watch .smi subtitles with it. The Quicktime Player automatically loads the subtitle file in this case because the subtitle file has the same name as the movie file.
I watched about 10 movie files from the same series that I downloaded together and did not have any problem watching them. I watched them on vlc. But this latest movie had problems I think (as I repeat). It did not load on vlc even though I waited for a minute, and normally movies load instantly on vlc.
So I think that movie file caused problems. It made QT player use up a lot of hard disk space.
I had better avoid watching that movie in the future. I don't want it to wreck my hard drive.
So to sum up, everything is back to normal. I have the hard disk space that I should have. However, I am scared of damaging my hard drive due to shonky movie files that eat up all the space when they are played using QT player, and so I will not watch those files in the future, as I do not know why the files do that.

Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platform

please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode
If you can't do that either, then you will probably need to reinstall 10.6.

HELP! "unable to find driver for this platform: 'ACPI'."

I was updating my Macbook Pro's software today the standard way and when/after it was installing the latest Mac OS X, my laptop shut off and now it won't boot up. A screen comes on that says "you need to restart your computer..." (which i did, but this message keeps popping up). on the same screen, it says stuff like panic: unable to find driver for this platform, debugger called, and displays all these numbers and letters. i don't know what is wrong or how to fix it. did my computer crash when installing the updated software/platform? PLEASE HELP!

mrb1568:
If I may put in just one work of caution. Mac OS X: About the Archive and Install feature explains the procedure for the installation option. However, although you can choose to save your settings and preferences, and although all third party apps in the Applications folder are saved, as well as your Users Folder, the article starts out by suggesting that you backup. That is because if anything goes wrong, as you already know it can, you can likely lose all your data, or if it can be rescued, not without cost and a lot of time.
If you don't have a reliable, up-to-date backup I suggest that you use SuperDuper to clone the entire HDD to an external HDD. You can do that by using Firewire Target Disk Mode and connecting an external HDD to the host computer.
Good luck.
cornelius
Message was edited by: cornelius

Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

Try CardMunch it works well for me

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

My Macbook Pro Won't boot. Unable to find the driver for this platform

Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!

Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.

I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X 10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

Similar Messages

Maybe you are looking for