I have a music docking station with an 8 pin connector. My i-pod has a 30 pin connector. Is there an adaptor?

I have a music docking station with an 8 pin connection. My i-pod has a 30 pin connection. Is there an adaptor available?

No. There are only Lightning to 30-pin adopters

Similar Messages

I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio. Any suggestions?

I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter. I have tried several connectors but cannot get any audio on the sound dock. Do you have any suggestions?

Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c They also have one that uses a cord to connect the dock to lightning that is $10 more.

IPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

iPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

you have two kickers in there.
Cheers
Pete

I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

I think that is happening is that the microphone is on during this recording. If you play the music through the iPhone speakers, it will record this sound, albeit at very poor quality. If you say anything (or laugh uproariously as I did while watching the app in action, then that, too, get recorded.
I am still looking for the solution we all want, which is to save the audio in reasonable quality.
Anyone out there with some ideas?
Cheers,
Rob

I have an order iPod classic (2007). I also have a Boise docking station. I can use the ipod with earphones

I have an order iPod classic (2007). I also have a Boise docking station. I can use the ipod with earphones or the computer however there is no sound when placed on the docking station. I don't believe it is the docking station as it is never moved, only I use it (older and single). Could it be a setting? Help

iPods, iPhones, and iPads aren't tied to one particular iTunes accout/Apple ID. So there are no special instructions to follow to allow you to sync it with your newer account. Simply sync it as you would your iPhone 4.
B-rock

Problem using docking station with ipod 5th generation

just bought an ipod touch, 5th generation, with the Lightening connector. Bought an Acoustic solutions docking station with the same small lightening connector but when I dock I can only charge the ipod and not play music through the docking station. Does anyone have same problems playing music with a 5th generation ipod that has the new small lightening connector?...I bumped into someone at Argos who said they are having the same problem not being able to play music from the new iphone 5 that has the lightening connector and even if you use a adaptor to make it 30 pin connector compatable it still doesnt work, any help will be appreciated, thanks

Does Acoustic Solutions say it will work with your model iPod and iOS 7.0.4?
Have you went to their support site?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Sometimes an iOS updates breaks compatibility and yo will have to wait for iOS update or an update to the dock's firmware.

Thunderbolt Docking Station with 2 Ports...

I'm new to the forums. Please forgive my noob status. I have a Belkin Thunderbolt docking station with 2 Thunderbolt ports (as well as a number of other useful connecting ports). My MacBook Pro has 2 of them also. If I connect my MacBook with TWO cables, one in each port, will this double (or at least increase) the transfer speed to and from my laptop, over and above the use of 1 TB Cable?
Thanks!
docrocker1

That dock is designed for one TB input from your Mac. The other ports on the dock are for additional TB devices to be connected. They are not made for parallel inputs.

Laptops in docking station with lid closed go to sleep during in-place migration from XP to Windows 7

We have an issue where existing XP laptops are targeted with SCCM 2012 OSD TS for upgrade to Windows 7. The laptops are in a docking station, with the lid closed. The laptops are going to sleep when the OSD is booted in WinPE, just before the
Setup Windows and Configmgr step. I have copied powercfg.exe from a Windows 8.1 machine (both AMD64 and x86 versions) to the MDT Tool package...." and then a step to run:
%DeployRoot%\Scripts\%PROCESSOR_ARCHITECTURE%\PowerCfg.exe -setacvalueindex 381b4222-f694-41f0-9685-ff5bb260df2e 4f971e89-eebd-4455-a8de-9e59040e7347 5ca83367-6e45-459f-a27b-476b1d01c936 0
However, the laptops are still sleeping during the Setup Windows and Configmgr step. Any insight to correcting this will be extremely helpful.

Hi
We came across this issue, seems odd that SCCM doesn't suspend the power management in the OS during the TS - (But then again it also seems odd that Windows 7 will go to sleep if you close the lid of a laptop half way through a shutdown, so that when you
lift the lid it wakes only to complete the shutdown, did MS not spot that, or choose to ignore it!?).
These commands should be run soon after the Setup Windows and ConfigMgr step and will disable the device and screen from sleep/hibernating:
Prevent sleep during OSD (Battery power)
cmd.exe /c powercfg -x -standby-timeout-dc 0
Prevent sleep during OSD (AC power)
cmd.exe /c powercfg -x -standby-timeout-ac 0
Prevent monitor off during OSD (Battery power)
cmd.exe /c powercfg -x -monitor-timeout-dc 0
Prevent monitor off during OSD (AC power)
cmd.exe /c powercfg -x -monitor-timeout-ac 0
Prevent hibernate during OSD (Battery power)
cmd.exe /c powercfg -x -hibernate-timeout-dc 0
Prevent hibernate during OSD (AC power)
cmd.exe /c powercfg -x -hibernate-timeout-ac 0
At the end of the TS, you can revert these changes by running the following command to reset the power scheme:
powercfg -restoredefaultschemes
Hope this helps
Thank you. However, we did put similar steps in our Task Sequence right after the "Setup Windows and..." step, but the issue we are having is that the "Sleep" occurs during the "Setup Windows and...." so it never reaches
anything after that step until the lid is opened.

Can I connect my iPhone 3GS to a docking station with a lightening connection

I have a docking station with a lightening connection, can I attach my iPhone 3GS to it?

No.

Usb expansion dock station with arch

Hi guys,
I'm the owner of a dell xps m1330 and i was wondering to buy the kingston exapsion dock station with the video out. It is connected to the laptop using a usb cable.
I know it works with winzozz obviously, but i don't know anything about its support with linux.
Is there any problem to transmit video out through usb to the dock and then to the external video lcd?
thanks in advance

What kind of video card do you have?
Just from my Dell XPS m1530, I have a nvidia card and within "System >> Preferences >> NVIDIA Server Settings", I am able to plug in a VGA cable on the side and have it recognize it almost instantly. I know tried it on a projector but still, it that worked, I would say you should be ok with the monitor part.

I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning)

I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning). I would be glad to get your help.

If you get the 30 pin dock get an Apple genuine adapter the rip-offs often do not work correctly
If you buy a lightning dock a company called Sandberg makes the reverse adapter ,I have one and it works correctly
As tonefox said i got the sandberg from Amazon

I have a new Bose sounddock with a lightning connector, but my iPod has the old style connector. Can I get an adapter to make them work together?

I have a new Bose sound dock with a lightning connector but my iPod has the old style connector
Can I get an adapter to make them work together?

Alternatively...
is this what you're after?
If so, have a look here: http://www.amazon.co.uk/Lightning-female-30-pin-Dock-Cable-Adapter/dp/B00DZN3GZK /ref=pd_sim_sbs_ce_1
or this one...
http://www.amazon.co.uk/SANDBERG-440-45-Adaptor-Lightning-Connector/dp/B009KZZ3L C/ref=sr_1_16?ie=UTF8&qid=1382801610&sr=8-16&keywords=30+pin+to+lightning+adapto r
Or google "lightning female to 30-pin dock male cable adaptor". The cruicial part is female lightning to male 30-pin ends.
The Apple cable is a female 30-pin to male lightning end.

My iPod has a problem. I cannot fit the charger into the bottom of the device, nor can I fit it on to the docking station. It is as if the bottom mechanism has been bent out of shape. Where would I get it repaired? Would it be expensive?

My iPod has a problem. I cannot fit the charger into the bottom of the device, nor can I fit it on to the docking station. It is as if the bottom mechanism has been bent out of shape. Where would I get it repaired? Would it be expensive?

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. The price depends upon model and capacity
Apple - iPod Repair price
A third-party place like the following may replace the doc connector for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I synced my sisters phone with my itunes and now all her contacts have disappeared and been replaced with mine and also photos... she has never done a back-up is there any way we can get all her contacts and pictures back?

I synced my sisters phone with my itunes and now all her contacts have disappeared and been replaced with mine and also photos... she has never done a back-up is there any way we can get all her contacts and pictures back?

Look under iTunes>Preferences>Devices...is there a backup listed for her phone? First thing done when you sync is an iPhone backup. If you have not synced since screwing her phone up, restoring from that backup(if it exists) should restore her content. Do not sync after you restore her phone, eject it. So, first disable auto-sync on that same device pane in iTunes before you proceed. If this doesn't work, is your sister bigger than you? If so, run 'cause her data is gone .

Can i use iphone 4 docking station with iphone 4s?

Please tell me if I purchase any of the docking stations, docking/alarm clocks, speakers, etc for my new iphone 4s..
if the box says they work, or are compatible with iphone 4 - (not 4s)
are they compatible???

Yes, they will work. The two phones have the exact same design (outside of internals)

I have a music docking station with an 8 pin connector. My i-pod has a 30 pin connector. Is there an adaptor?

Similar Messages

Maybe you are looking for