I have a MX 860 Printer and it makes a squeaking sound during warm-up but not during printing.
This printer is making loud squeaking sounds during warm-up, it prints ok but I don't know where it is coming from or how to go about fixing it.Any help would be appreciated.
Hi Den,
Please open the cover to the printer and look for any foriegn objects. Also, please look in the paper feed opening for anything that may be out of place.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
I purchased an album from the itunes store on my Ipad2 thinking i could access it from my windows laptop where I sync my ipod. I turned on Home Sharing and can see my laptop libraries from my ipad but not vice versa. Is there any way to fix this so I can transfer the album to the itunes on my laptop?
Yes I tried that. I finally turned off all home sharing settings, shut down my desktop and found them in my account settings in the store on the cloud. So at that point I just had it download everything. But I suspect that with the ipad somehow being on, the store was saying I had already received them? Regardless, my trip today whilst running errands, I was rocking out to vintage Police music! Thank you so much for responding.
-
I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?
Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change
-
I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting). My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't. I am super frustrated at this point. So any suggestions would be great. Am I missing something basic or do we just have a soundless iPad now?
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine? This only affects 2 websites, both of which were bookmarked. I have removed them as bookmarks and this makes no difference.
From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
I can't take a video in camera mode. I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?
Swipe up or down to select options.
-
i have paid for mountain lion and it says it is dowloading ....but nothing seems to be happening? it is a macbook 6,1 (4 years old?) and is currently running OS X 10.6.8
It's a 4+ GB file. It takes some time if you have a slow Internet connection. You may have lost connection with the server. Try pausing the download for a few second then restarting.
-
i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.
Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes -
i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.
Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience. -
I have a 10.8.5 and need iphoto 9.whatever to order photo books but can't upgrade iphoto or the os unless I get a new computer is there a work around?
Thanks John
<Email Edited By Host>Mac OS X does not offer a Clean install option. If by clean install you mean erasing the system, that is not recommended unless:
1. You bought a used/refurbished Mac and there is software on it without any accompanying discs, and it is older than July 20, 2011 in model release:
https://discussions.apple.com/docs/DOC-6413
Or if it is at or newer, then erase it if it has applications installed that would not have been prebundled with it and you have no CDs for those applications.
You don't want someone else's software keys, or accounts, or to be running unlicensed software. At and newer Macs offer a built-in internet restore for their software with a command-R boot that lets you erase the system with Disk Utility, and then install from the internet the latest operating system.
2. You have a hardware issue and want to eliminate possible software issues as the cause when troubleshooting a problem all at once.
Issues affecting a new install have to be isolated before you attempt it. Unless you know it is software or hardware, erasing may only mask other problems. -
Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.
Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason -
I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.
ebooks is a term for (mainly) textual books that can be read on screen. If you're listening then I think you mean audiobooks. See audiobooks on iPods. Either reorganize as single files or access via a playlist.
tt2 -
I have an I phone 4S and I usually back it up threw I Cloud but since my phone is pretty old and has been shutting off on me I decided to back it up in I tunes. I connected the phone and clicked Back Up Now. When it was done I picked up the phone and tried to open an app and discovered that all of my apps have been restored as if I had just down loaded them from the app store. So I lost all progress on them. Is there anything I can do to change it back? And I don't understand what I did wrong.
This means the iPhone has not been connected or synced with your computer since the passcode lock was enabled on the iPhone and too late now.
-
I have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working
i have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working
Just activate the Windows 8 OS via an internet connection, then install all optional, recommended and important drivers from Windows Update, reboot and it'll work.
[Windows Key] --> Control Panel --> View by: Large icons --> Windows Update --> Scan for updates
Maybe you are looking for
-
Recommendations for printer/all in one for use with 10.9+? Help!
Does anyone have recommendations for a printer/all-in-one that will work with Mavericks? Monochrome (b&w) laser printer/all-in-one preferred. This is for a small office (5-8 people). Frequent pdf printing and 30+ page documents. Right now I'm looking
-
Foreign Alu keyboard shortcut problems.
Hello everyone, I recently bought a new alu keyboard for my macbook pro. But the shortcuts in fcp like F9 (insert) etc... don't seem to work. But they do still work if I use the old keyboard. I thought there was a problem with the osx shorcuts overri
-
Forms 10.1.2.3 + Webutil + Sun plug-in (JRE) configuration error
I am trying to configure webutil, my forms version is 10.1.2.3, with IE-8 and I am using Sun plug-in (JRE), I went through all the configuration steps in detail and checked several time but when i run webutel_demo form i get the bean not found error,
-
Can't email photos directly from iPhoto (MBPro 2012) running OS 10.9.4 I deleted the email & passwords in the iPhoto Preferences since I was given an error message that my email and password didn't match???? reinstalled them and tried again with no l
-
How to restrict the Users to access other application URL on same machine?
We have one Oracle 10g AS server, hostname "abc", this server having two services named "DSS" and "RBL". Our requriement is how we can restrict the URL "http://abc.xyz.com:7777/forms/frmservlet?config=rbl" from user access, because both DSS and RBL h