I have a MX922 - trying to do a direct connect to my computer.No success

Printer is plugged in.
Laptop is plugged in.
Printer is connected to laptop.
Printer is set as Default on laptop.
Printer shows as Offline on laptop.

Hello!
Please visit the link below for step-by-step directions to potentially clear this error:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
If this issue persists, please get in touch with our technical support department at http://bit.ly/Phone_Support
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

    I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
    What should I do?

    The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that  your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
    http://support.apple.com/kb/DL999
    http://support.apple.com/kb/HT4670

  • I am unable to update an app, Chirps! USA. I have tried both wireless and when connected to the computer. I contacted the company and they said it was an iTunes problem. ANy suggestions?

    I am unable to update an app, Chirps! USA. I have tried both wireless and when connected to the computer. I contacted the company and they said it was an iTunes problem. ANy suggestions?

    Hi..
    Delete the app then reinstall.
    Hold the app icon down until all the apps jiggle then tap the x then tap Delete. Press the Home button once or twice to stop the jiggling.
    Then go to the iTunes store and re download the app.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    That should download the most recent version including whatever update was available.
    You won't be charged again.

  • HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

    you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

    How big is your library?  I would recommend the following troubleshooting steps:
    - Backup your library.  Always a good idea before messing with things.  
    - Create a new library.   Refer to this article for details:  http://support.apple.com/kb/HT1589.  This won't delete your old library, you're just creating a new empty one.  Also refer to this article to get back to your old library later.
    - Add a few albums into this new library.  Not everything, just a small sampling, as a test.
    - Activate Match on this new library.  You shouldn't have to re-pay, it should just say "Add Computer" or similar.
    - At this point, Match should run again. With just a few albums it should complete in just a few minutes.
    If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.   

  • I have an iphone 5 and i when i connect to my computer, i cant see all my photographs

    I have an iphone 5 and when i plug it into my computer to see my pictures, only a handful is there.

    are you absolutely positive they were ringtones? check your music app to see if they are in there. If they are, you downloaded songs and not ring tones.

  • I have an older operating iPod touch that when connected to my computer, comes up as a camera in iPhoto and doesn't read in iTunes.  Any suggestions?

    I'm having trouble with my iPod Touch  I took over my moms and she never updated it.  It opens in iPhoto as a camera,  not iTunes.  Any suggestions?? Thanks!

    See this article about disabling the camera notification for your iPod in iPhoto.  Once oyu have done that disconnect and reconnect your iPod and see if that helps.
    http://support.apple.com/kb/ts1501
    Otherwise, see this article for more troubleshooting assistance regarding a missing iOS device in iTunes on a Mac.
    http://support.apple.com/kb/TS1591
    B-rock

  • I have a 5th generation ipod classic, it wont connect to my computer without freezing itunes, and wondering if there is a way to manually update software

    When i connect my ipod to the computer it freezes not only itunes but google chrome as well. I dont know that it is recognized as an ipod. I think it only recognizes it as a mass storage device and because of this i can not update the software to 1.3 and also have the ability to restore it. Im wondering if it is possible to do a manually software update without itunes or restore/reformat.

    I'm not sure if my case is 100% related but it may help. I had this happen to me after I installed a new hard drive on my computer. The iPod would show up as an external disc drive but not on iTunes. What happened was, while reformating the diskdrive  the system resorted the hard drives to be the B and C drives. This then made the iPod the A drive and itunes didn't recognize it.  I went in and changed it to another letter (K or L or something) and iTunes picked it up and synched it automatically.
    Hope that's of some help.    

  • HT4623 hello I have just updated my ipad connected to my computer now my ipad has frozen all I can see is the apple emblem and a straight line

    Hello
    I have just tried to update my iPad connected to my computer all seem to go well but my iPad has now frozen it just shows the apple emblem with the line underneath. can't even turn it off I have updated before and never had a problem.
    help

    It may take a while to download, prepare and install the update. The line under the Apple logo is a progress indication. Give it a bit of time but if it still fails to update, you may can do the following...
    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If that still doesn;t work, you may need to restore your iPad. Follow these instructions.

  • HT1351 my ipod touch 2nd generation is no longer reconized in itunes when connected to my computer. I have tried different ipod cables and nothing works.

    my ipod touch 2nd generation is no longer reconized in itunes when connected to my computer. I have tried different ipod cables and nothing works.

    Hi Imminnie,
    Thanks for using Apple Support Communities.  If iTunes doesn't recognize your iPod touch, this article may help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    - Ari

  • When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find on the internet but nothing is working. Any other suggestions?

    When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?

    If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
    Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only.

  • I am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

    i am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

    I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I  am using windows 7 professional install disc. I  can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

    Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

    Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
    Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
    But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
    Hmm, ideas anyone?
    SBB

  • I have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no jo

    i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty

    I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty and been able to resolve it?

    Did you try deleting the mail account, then adding it back?   I've read a lot of times that is what needs to happen in order for it to work properly.

Maybe you are looking for