I have a nano 5th gen bought new. I no longer have the computer that I registered it w and created music library on. I want to allow my new computer and itunes to sync w my nano w/o losing the music on it. When I try it tells me i
I have a nano 5th gen which I bought new. I no longer have the computer that I sync'd it with and created library on. I have new computer and Itunes library which I want to sync w my nano and songs on it. When I try it tells me I will loose all the songs on my nano bc Im already sync'd on a dif library. How do I keep from loosing all my songs?
Your iPod is designed to sync with only one iTunes library at a time. If you try to sync it with a new or different iTunes library, it will erase what is currently on the iPod and replace it with what is in the new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
Similar Messages
-
i have a ipod touch 4th gen and i have the wifi bars but when i try to search something it wont let me conect it says "Lightspeed systems - Wed acces" what could i do help please.! o.o
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit") -
I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?
Hi Prabhuram and falez,
This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
~Surendra -
I have the ICloud icon on my PC - Windows 7 - and the program. When I try to sign in using my Apple ID, the message says that the ID is valid but I don't have an account. How do I get an an Icloud account?
You can't create an iCloud account on your PC. You have to first create an iCloud account on an iOS device (iPhone, iPad, iPod Touch) or Mac (running OS X Lion or higher). After creating the account on one of these devices you can use the ID to sign into the account on your PC.
-
I am running Windows 7 Enterprise.
I need to upgrade my version of Itunes from version 7 to version 10 or 11.
I go to Help and click on Search for Upgrades.
I then select Upgrade Itunes.
The system starts to upgrade and download the new software.
It gets to 52.60 MB of 56 MB and then it just freezes / sticks and does not go any further ?
I have tried to upgrade on a number of occasions but the same thing happens each time.
Any help please ?Answer is in the original post.
-
WWifi exclamation mark had suddenly appeared on my imac. I have rebooted imac and router
When you see an exclamation point in the Wi-Fi menu, first turn Wi-Fi off and back on. If it still fails to connect, then from the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, restart the computer and try again. If there's no change, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
If there's still no connection, and if you have control of the router, compare its settings to Apple's recommendations. Some third-party routers may be incompatible in 802.11b/g/n radio mode. Try setting the mode to 802.11n only. -
please help asap!
The Flashlight App is for the iPhone (and iPad). It is not made for the iPod touch.
-
Bought 5 new songs on itunes. ipod syncs but songs do not show up on any playlist
Bought 5 new songs on itunes . ipod syncs but the new songs don't show up on the play list that is on the ipod . the do appear on itunes library. what am i doing wrong ?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? (iTunes purchases only) -
How can I, or can I export my songs on my iPod back to my computer?
The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this same problem with my other devices (iPad 3rd Gen and iPod Nano 6th Gen). I am really frustrated now, because it seems as if I have to start all over again. This will be a royal pain in the butt! I don't understand why Apple makes this so hard and impossible to do this. Please help, anybody!!See Recover your iTunes library from your iPod or iOS device.
tt2 -
I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side : -
How do I delete a credit card from my iTunes account without adding another one? My friend bought an app with her credit card and I no longer have the info but every time I try to download a free app (ex: Instagram, Twitter, vine etc.) it ask for the credit cards security code. I can not find a way to delete that cards info without adding another cards info.
http://support.apple.com/kb/ht1918
http://support.apple.com/kb/ts5366 -
i have an ipod that was associated with a different i-tunes account. I want to sync it to my new i-tunes account but do not want to lose all of the music files already stored on the ipod. how do i do this?
Hello, peppertwist.
Thank you for visiting Apple Support Communities.
When receiving the not enough space alert, he is the best article to go through.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
Jason H. -
I can't sync my iPhone 4S (updated to 5) to iTunes cuz I have no computer to connect to sync with the iTunes App. Help me please??
Have you disabled your virus protection?
-
I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DHHow do I delete the restriction in iTunes
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)
Maybe you are looking for
-
How to use Jasperreport with Application Express?
HI, We are really want to 'print out' from our apex applications, but by far no easy way to do so. (BI too expensive and complicated) I am tring to install Jasperreports with apex, but I don't know how to do it, I downloaded the windows version of Ja
-
RFC_ERROR_SYSTEM_FAILURE: Could not ascertain code page
Guys: Here is the solution i discovered and its going to error. PI is in windows environment. File to RFC ( in PI itself no remote SAP ECC sytem or any system) -Sender com channle I am using the file adapter with FCC -Receiver I am using a RFC fucnti
-
My iMac 24" inte will not boot. Monitor lights up with squiggly little lines, but that's all. Help??
-
Hi Experts, Can anybody let me know - Is there a Function Module exists - to change 'Sales Order' (like VA02) at Item level so that I can use it in a program? My basic requirement is to change multiple Sales Orders with a new 'Pricing Date'. Thanks a
-
JUTableSortModel throws NPE if table has no rows
Hi people, I place this here in case its not known about .... Clicking on a column header in an empty table produces this (JDeveloper 9.0.5): java.lang.NullPointerException at oracle.jbo.uicli.jui.JUTableSortModel.sortByColumn(JUTableSortModel.j