I have a new 64G WiFi Ipad 2 and have constant problems with internet freezing. It is not my router as my other products including and iTouch work fine.
I have had this problem since i got the iPad home. It is set up exactly the same as my iTouch (that I have had for some time with no problems) I updated the SW yesterday to 4.3.5 and there is no improvement at all. I can surf for a while then the IPad freezes. Even updating Apps is almost impossible with my iPad as I lose connection with ITunes constantly.
This is driving me mad and I am now regretting buying an IPad at all.
Try the following to see if they help.
For Safari try clearing it's cache : Settings > Safari > Clear Cache (and Clear History)
Try closing all apps completely and then re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Then do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks
Refer below link once
App doesn’t open | Progress wheel spins continually -
I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?
I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.
-
I have a problem with disk utility that is not on my mac pro
I have a problem with disk utility that is not on my mac pro
Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight -
Since the recent upgrade from Adobe pdf plug-inn Firefox often won't open pdf-files. Uninstalling doesn't help. I don't have this problem with Internet Explorer.
Hi efacg,
Most printing issues are solved by resetting the Printing preferences. When you print from Firefox and you click on the down arrow, do you see Defualt and Firefox? Please make changes to the preferences here and preview the document.
If this continues to be an issue please also see [[Fix printing problems in Firefox]]
If there are any other questions, please do not hesitate to ask, we are here to help. -
Hello I have a problem with the iPhone 5 does not know the account activation lock
Hello I have a problem with the iPhone 5 does not know the account activation lock
You will not be able to access the device without the account activate lock password. IF you have the receipt and other proof of purchase you may have sucess with contacting apple and asking them for assistance. Depending gretaly on how much proof of purchase you have.
Good luck Friend. -
Printer print size is very small. Do not have this problem with Internet explorer.
When I try to print something in Firefox, the printer print size is extremely small. I do not have this problem with Internet Explorer.
File > Page Setup - '''Scale''' <br />
100% or Shrink to Fit is usually best. -
Anyone have a problem with the HDMI port suddenly not recognizing any digital source imput signal?
I have an HP 2711x monitor.
Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
Thanks.Hello Largelee,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
'Input out of Range' Error After a Recovery or Upgrading to Windows 7
Monitor is Blank
Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
My iPad air won't change at all, and I don't know if it's the port or charger cable it is charging normally but it just won't charge. I have had a new port put in before after a charger getting stuck in there but it worked fine after and now it's not working at all! I don't know if maybe it's the charger getting old but I have spent far too much money on this iPad then I should have as it's one problem after another witch is causing me lots of stress.
Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall. -
I've been using the Firefox browser for nearly a year now but for the past three days I can't open my tiscali email account via Firefox. The message "you have undefined new mails in your inbox" comes up. Talk Talk technical help says there is a problem with Firefox and advised me to use Internet Explorer. I can get into my account through Explorer but would much prefer to use Firefox so please help me out.
Apparently TalkTalk mail will work with Firefox 4 and Firefox 5 ''if'' you set the browser to ''lie'' to TalkTalk mail by saying that you are still using version 3.6.
You can find the instructions for that in a post on the TalkTalk forums: [http://www.talktalk.co.uk/forums/showthread.php?t=185113#post2452787 Firefox 4 & TalkTalk webmail - Forums].
Note: when you open about:config the first time, it will display a warning message that you should be careful with the changes you make. That's definitely good to bear in mind.
Does it work? -
recently purchased the iphone5 (2 of them) and are having problems with the earpods. no sound when plugged in to the iphone. both phones. works with the ipad. help please
Hi P5052,
Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
It is very unusual that neither phone is working with the new earpods.
Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
The article below will give you the basic troubleshooting steps for this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Can't hear through the receiver or speakers
Symptoms
When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy
<Edited by Host> -
As per my headline comment, the wi-fi connection (which before IO6) worked fine now problematic, and iPhone in serious danger of flying out of the window..is there an option to get previous IOS back on the phone? I have tried the various "solutions" indicated in the chat forum but nothing helps..any ideas before I lose what little hair I have left?
If, as you suggest, you have iOS 6.0.2 installed in your 3GS, you shouldn't have. That OS is only for the iPhone 5 and Mini iPad.
Try rebooting the router. Any other devices working happily on it are irrelevent. -
Clicking on "Compose", "Reply" or "Forward" in Yahoo Mail does not do anything. I troubleshot the problem with Yahoo directly and they feel that the issue is with Mozilla Firefox. I do not have this issue when using Internet Explorer. Other buttons in Yahoo Mail, such as "Delete" and "Move" do work.
I had the same problem and discovered it went away when I disabled the AVG Do Not Track extension on firefox.
Maybe you are looking for
-
Not able to edit Service Contract from WEBUI beacause of error
Hi, I am trying to edit Service Contract from WEB UI. But, when ever I say edit, it is giving error saying "Document is being distributed. Changes are not possible". Can you please let me know, why such error comes..and how to rectify that. Thanks, S
-
Mozilla is crashing every time i open it
This started the other day, but i opened it in safe mode and it worked okay. I closed it, and it won't open again. Computer restart, nothing Refresh firefox, nothing Uninstall and reinstall, nothing It won't open at all, and I've incedentally sent ab
-
Windows Message 'iTunes has stopped working' and fails to sync my iPhone
Ive synced my iPhone so many times, but now its decided it doesnt want to co-operate. I dont have that much knowledge of iPhones when they go wrong.. So heres what happens and what I need help with.. I connect my iPhone to iTunes and it starts syncin
-
hello all, i have written a small program to send a message to echo server and get back the response from the server. it gives a error as COULD NOT GET I/O FOR CONNECTION TO <ip address> i am working on win nt version 4 service pack 4 installed on a
-
How can I get IP and hots names of all the machines.....
I need to get the IP addresses and host names of all the machines in my netowrk and need to select only is a HP / Compaq x86 machines finaly. If you know atleast a part of this please help me. [email protected]