I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?
I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?
Hello sstefanik
Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.
Similar Messages
-
I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?
Thanks planb77. Your instructions worked but I had to do a little more than you stated. I did not realize that transferring files to a new computer was not enough. When the iPod synced I was told I needed to "authorize" my new computer to get my iTunes purchases to sync to the iPod. So after the initial sync, I ejected and disconnected the iPod, went into the iTunes store, set up "home sharing" and then authorized the new computer. When that was done I reconnected the iPod and was able to sync all my books and music. The only thing I couldn't do was rename the iPod as iTunes never asked me to. Is there a way to rename it after it has been set by iTunes as "owner's iPod"?
-
What is a great 1TB portable hard drive for a new macbook pro that works great with lightroom?
I want to keep all my photos on the portable drive while working in lightroom. Is there much speed difference between USB 3 and thunderbolt?
You might want to take a look at the LaCie Rugged series.
You can get it in both USB 3 or thunderbolt....yes, thunderbolt is easily 2-3x faster than USB 3.
Tom -
I have a new Airport Extreme and and old airport express. I am getting an amber status light on the Extreme and a green light on the Express. The Extreme is blinking amber all the time.
I have internet and everything seems to be working.
I have reset and pulled the power cord on both the extreme and the internet block
How do I make it Green?If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click on the amber dot in the small window
It might be a message that a firmware update is available for your AirPort Extreme. -
I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4
The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
AirPort Utility 5.6 for Mac OS X Lion -
Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?
I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots: -
After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address? -
I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.
I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance. -
i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?
It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895 -
So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!
12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411 -
i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????
So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst. -
I am trying to install an app in my iphone. When I click Install, my old gmail account comes up for verification and it asks for my password etc. I dont use this account anymore and have a new gmail account that is associated with my apple account. How can I get the new gmail to default when I am trying to install apps?
Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID. -
I have a 4th gen nano that is loaded with my music library via a prior addition of Windows. I now have Windows 7 and when I access I-tunes and plug in my Ipod I get a list of my music but cannot play it. Open to suggestions on how to solve this this problem.
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so. Today it just went dead and will not do anything. Any suggestions?
Hard reset by holding down the home button and the sleep/wake lock button (BUtton on the bottom of your display, button you use to turn the screen black) hold them both down for 15 seconds till you see the apple reappear
-
maybe its just me but verizon had my rebate for a month and some change and still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im looking into a lawsuit now so aggravating..my phone is def on a blank sceen right now
JCLouis,
We saw your story and are very worried about what we read! This isn't like us at all and we are here to help sort it all out. We recommend calling the Rebate Center to check on the status. Their number is 1-800-457-0864.
We can help you right here with your phone! How often does it turn off? Is it just that the screen goes black or does it completely power down? Also, does it start back up by itself if it does power down?
SarahO_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Bluetooth Smart Dongle no longer working in Mavericks.
I've been using the IOGear Bluetooth 4.0 Dongle on my late '08 MBP for quite some time. After upgrading to Mavericks, it was no longer being recognized, and worse, when I unplug it my system crashes and reboots "sleep/wake failure". I tried cycling
-
Hi All, In SolMan 7.0 when i am using T-code Solution_Manager->Business process Monitoring tab System is give as give below ABAP DUMP . Please Share your idea to resolve this issue. Runtime Errors
-
hey guys i know that quicktime export is the best for dvd because it is the same source coming out as it was going in. my one video i exported was roughly 17 minutes long...i exported it and it came to about 300mb i then exported a video that was onl
-
Using specifc partner function as access field for pricing
Hi all, i am planning to add a specific partner function as an access field in combination with the material with which i will maintain the condition record & i want this condition record to be fetched for my respective condition type. i did the foll
-
Hi, I try to complete the RecordSelectionFormula of my subreport ("{ALARM.JOB_ID} = {?Pm-?JOB_ID}) with: " OR {ALARM.GROUP} = 10 AND {ALARM.COMES} > (select top 1 {AUFTRAG.[TIMESTAMP]} from where {AUFTRAG.JOB_ID} = {?Pm-?JOB_ID} and {AUFTRAG.STATUS}