I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

Thanks planb77. Your instructions worked but I had to do a little more than you stated. I did not realize that transferring files to a new computer was not enough. When the iPod synced I was told I needed to "authorize" my new computer to get my iTunes purchases to sync to the iPod. So after the initial sync, I ejected and disconnected the iPod, went into the iTunes store, set up "home sharing" and then authorized the new computer. When that was done I reconnected the iPod and was able to sync all my books and music. The only thing I couldn't do was rename the iPod as iTunes never asked me to. Is there a way to rename it after it has been set by iTunes as "owner's iPod"?

Similar Messages

I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?

I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?

Hello sstefanik
Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

I have a new Airport Extreme and an old airport express. I am getting an amber light on the new Extreme and a green light on the Express. I have internet no problem but the status light is blinking amber

I have a new Airport Extreme and and old airport express. I am getting an amber status light on the Extreme and a green light on the Express. The Extreme is blinking amber all the time.
I have internet and everything seems to be working.
I have reset and pulled the power cord on both the extreme and the internet block
How do I make it Green?

If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click on the amber dot in the small window
It might be a message that a firmware update is available for your AirPort Extreme.

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
AirPort Utility 5.6 for Mac OS X Lion

Hello...I have an older Iphone(3G) and am having difficulty linking it to my equally ancient PC(windows Vista) any ideas?...tks

hello...I have an older Iphone(3G) and am having difficulty linking it to my equally ancient PC(windows Vista) any ideas?...tks

No one, you have marked your question as solved.

My new airport extreme transmits at low rates (0-54)and is intermittent? Help!

I need help figuring out why my new 6th generation airport extreme signal is transmitting at a low rate (0-54) and when streaming the signal goes in and out? My equipment is as follows... I have a moterolla extreme DOCsis 3.0 modum, comcast 30 mpbs, and new apple extreme with current airport utility 7.7.1. Any ideas or troubleshooting tips?

When you created your wireless network with the Airport Extreme, did you select having your wireless network backwards compatible with "b/g" devices? If your wireless network was created as "N" compatible for "N" compatible wireless cards only, an iPhone will not be able to connect to your wireless network since the iPhone's wireless card is not "N" compatible.

I burned an edited movie to disc using H.264 codec and a second movie to MPEG -4 Video both worked well on my iMac but will not play on my Sony DVD Recorder/Player which accepts both DVD RW and DVD-RW. Any suggestions?

I burned an edited movie to disc using H.264 codec and a second movie using MPEG-4 Video. Both played well on my iMac but would not play on my Sony DVD Recorder/Player which accepts both DVD+RW and DVD-RW discs. I have tried other 'codecs' DV-PAL; DVCPRO-PAL; DVCPRO50-PAL; AIC; and finally share to iDVD. iDVD works on both my iMac and DVD Recorder but the picture is very poor with major shimmering which is unwatchable. Can anyone assist? The other codecs I used either do not pay on my video recorder or fail when I play them back on my iMac. I am at a loss as to what I can do. I am from the UK so using PAL is essential.

If the source video is interlaced, you may have problems using iMovie. It de-interlaces everything on output which can cause picture to look strange. Final Cut Pro X supports interlaced video, but it costs a lot more.
Standard DVD Players don't support H.264 or MPEG4. You might want to look at this article on transferring HD video to DVD. I wrote this article mainly for Final Cut Pro, but many of the same principles apply.

New Airport Extreme not working with my Quad Macpro

Hi all-
My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
Thanks in advance.
Lee

I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
- Signal Strength is between 45%-56%
- Noise is between 24%-41%
- Freq = 2412
- No websites load despite it's seeing the router and saying we've joined it.
I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
Thanks again...

Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I have a new USB thumb drive that works in my 2010 iMac but not in my 2012 MacBook Pro

Today I purchased an 'autodrive' usb thumbdrive at Staples. The drive works fine on my mid 2010 iMac, and my Asus Netbook running Windows 7. However, it is not recognized at all by System Information or Disk Utility on my mid 2012 Macbook Pro. Both Macs are running Mountain Lion 10.8.2.
If I connect my 2 year old SanDisk USB thumb drive to the same USB port on my Macbook Pro, it is immediately recognized and a finder window opens. The SanDisk drive is also recognized properly by the iMac and the Netbook.
Is there any way to further debug this issue to get a better idea of why the device is not being recognized by the Macbook Pro?
Thanks,
-Scott

I am having this exact same problem with my New MBP 15" quad core 2.6GHz i7 on 10.8.2. I have other thumb drives that work, but an older thumb drive that works on my prior MBP 15" 2.7GHz dual core i7 on 10.7 and XP and Windows 8 laptops isn't recognized at all by the newer MBP. This thumbdrive is only 256MB and may be USB 1, but USB 1 stuff should work on a USB3 interface unless it's a bug. I've freshly formatted the drive and tested it with disk utility on the older MBP, so it's an issue with the newer Mac's USB controller or MacOS 10.8.2
I suspect a bug.

How can I delete the history of wireless connections? Need to delete it entirely, as I have a new airport extreme and I named the network the same as it had previously been,

How can I delete the history of wireless connections? I got a new apple extreme, and I kept that same network name as I previously had with the LinkSys. Now the Mac won't automatically connect to the network. Genious Bar fixed my Pro, they said that you have to delete all the history, not just the network name. I wasn't at the Genious Bar to see how they did it, now I need to fix the Mac. Appreciate any help!

Yes, so...
I have also closed iTunes, reset network settings on the iPad, then shut down and restarted the iPad. Still, I end up with greyed out rectangular icons for all the movies I've ever streamed from my Mac Mini to my ipad via my home wireless router.
Again, I have watched all the way to the end of the movie, selcted the movie in iTunes and chosen "mark as watched", and then deleted it in ITunes.
Any ideas?

I have a new airport extreme and can't set ip up

Hello, first of all I have to say that I'm from Argentina so forgive my English mistakes.
I recently bought an airport extreme and I can't set it up with the airport utility. I have windows 8, I download the Airport Utility and a message says that an error occurred while trying to access the apple device. The Airport has flashing amber light. And I read the manual in English and Spanish and could not find the solution.
I can access internet but only with this laptop and in unsecured way.
Please, someone can tell me what to do.
Thanks.

Be sure that you've installed Bonjour Print Services for Windows:
http://support.apple.com/kb/DL999
Connect the AirPort Extreme directly to your Windows 8 computer by Ethernet cable and then run AirPort Utility.

Airport Extreme Disks working well for me after 7.1 upgrade

Just wanted to mention... like many others, I had problems using disks connected to the Airport Extreme. Disks would disappear, I couldn't connect, etc. I had scaled back my usage to a single drive, with only very limited operations.
I'm happy to report that all my disk problems have been solved with the 7.1 firmware upgrade. I now have 2 disks connected through an IOGear 4-port USB hub, with heavy usage from multiple Mac OSX and Windows XP computers, and have had no problems whatsoever. I'm using the Airport Extreme in bridged mode, with only 802.11n enabled, and a disk password.

iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Although Safari isn't a purchased app, look at this link.
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
 Cheers, Tom

My new macbook air sometimes has trouble starting up. It gets stuck at various stages. I have reinstalled Lion twice. That solves the problem for a few days and then in reoccurs. Any ideas? Thanks, Marty

My new macbook air sometimes has difficulty booting up. I reinstalled Lion twice. That soves the problem temporarily and then after a few days it reoccurs. It also has trouble at times opening mail or Microsoft Word. Any ideas? Thanks, Marty

Marty,
Can you elaborate on what you mean by "difficulty" during the boot sequence? When/where is the difficulty occurring? Are you getting to the Apple logo? Apple logo with spinning gear? Blue screen? Login window? There's many phases to the boot sequence and when it fails can go a long way in determing what's causing the problem.
Also, what sort of third party software is installed? It sounds like at a minimum you've installed Microsoft Office? Anything else?
Lastly, after you reinstall Lion do you perform a restore from backup or remigrate your data/content right back into the new OS? If so that could potentially be the problem right there. But truthfully there's more information that needs to be provided to begin recommending troubleshooting steps.

I have just recieved a brand new ipod touch 8GB, it wont turn on and it wont either charge or recognise connection through ITunes. I have tried the hold down home and the power button together but no luck. Its absolutely dead, any ideas please ????

I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

Similar Messages

Maybe you are looking for