I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

Similar Messages

My computer has had to have a new hard drive how do i get my iphone to sync all the music and info on it please?

I Have had to have a new hard drive fitted to my sony computer and it has wiped everything off. I have reinstaled itunes, how do i sync the info on my iphone to my computer as i cant seem to sync the contacts or the music. Please can sombody help me as i'm not great with computers?

If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
http://www.wideanglesoftware.com/touchcopy/index.php

I have a new hard drive on my imac I want to sync my ipad(which has the files I lost when my old hard drive died), which holds the files I lost when my old hard drive died. How can I sync my ipad with my new hard drive?

My hard drive on my IMac died, so I have a new hard drive. I want to sync my Ipad(which has the files I lost when my old hard drive died) back with my IMac. How can I sync my Ipad with my new IMac hard drive without erasing my legacy files on the Ipad at the same time?

Copy everything from your backup copy of your cpomputer to your new hard drive.

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT1386 I have had to have a new hard drive fitted to my Apple Mac and now I can't sync my music with my iPhone, it thinks it's a new computer. Please help, What do I do?

I have had to have a new hard drive fitted and now I cannot sync my Iphone with my Apple Mac, thinks it's a new computer. Any ideas Please?
Alan C

I keep this as a copy and paste. It's the same process for Mac as it is for a PC. Read it over and see what you think. Post back if you have questions.
The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your Mac and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your PC. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527

I have a power mac and the hard drive is about to die, i have a new hard drive to install, i know how to remove and put the old in the second space and load the new one, then what...when do reinstall the OS and transfer data from old drive

I have a power mac, the hard drive is struggling, I have a new hard drive ready to install, after I pull the old one and put the new one it's place and place the old one in the next slot ready to transfer data....how do I start this next step. Do I down load OS, and go to utililities...please just a step by step after hard drives in position.

Hi Susan, you must have a Mac Pro, Powermacs cannot run 10.6.x
Anyway, once you Install the new drive, you likely must Format it...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
Then Install the OS & on first boot of the new install, after a step or two, avail yourself of Migration Assistant & Migrate everything.

I have a new hard drive, can I pull my contacts and ical from my iphone?

I have a new hard drive and I would like to pull my ical and contacts from my iphone to replace what I lost but when I sync my phone it doesn't bring the data onto my computer and if I choose sync calendar and contacts it seems to want to erase the phone and replace with the blank computer data. Any ideas?

If you are running OSX Lion and iOS 5, you can sync via iCloud.
What versions of OSX and iOS are you running?

I had to have a new hard drive installed. Now programs load slowly and pinwheel spins a lot. Any suggestions?, I had to have a new hard drive installed. Now programs load slowly and pinwheel spins a lot. Any suggestions?

I had to have a new hard drive installed. Now programs load slowly and pinwheel spins a lot. Any suggestions?, I had to have a new hard drive installed. Now programs load slowly and pinwheel spins a lot. Any suggestions?

It's likely that the new drive isn't working, or it wasn't installed correctly, or you had some other hardware fault rather than a bad drive.

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

Mera, (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view. This also erased the pictures from the memory card. Help?

I tried to download my pictures with my memory card from my camera (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view, also not saved in my 'Iphotos' This also erased the pictures from the memory card. Help.....anyway of retrieving them?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
did you get a message when trying to import from the memory card?
did you use a card reader?
what was you exact workflow for attempting the import?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library? See image below:
what type of Mac?
how much free space on your boot drive?
OT

Hard Drive crashed. I have a new hard drive but I cannot log into computer.How do I reset password to my i Mac?

Hard Drive crashed. I have a new hard drive but I cannot log into computer.How do I reset password to my iMac?

Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.

I have a new hard drive. iPhoto does not show as purchased in App Store although I had it on the old hard drive. How do I reinstall it without buying it again?

I have a new hard drive. iPhoto does not show as purchased in App Store although I had it on the old hard drive. How do I reinstall it without buying it?
Thank you.
John

Depends on where you got it - if it came on yoru compujter then you need to have accepeted it in the App store - and it will be in your purchases when you log in with the Apple ID that you used to set up your computer - it mahy be hidden - if you do not find it unhide applications in teh App store
LN

I am the administrator on my computer but my new hard drive is locked and does not give me permission to unlock

I am the administrator on my computer but my new hard drive is locked and does not give me permission to unlock. How do I fix this? I already tried fixing permissions.

Whoops! I don't know why but this time when I clicked on the lock it opened and I was able to fix the problem. I am curious tho' as to why this happened.

In need of a new hard drive for my old G5 computer

Hello there, I'm not as savvy as you are with computers but I am in need of a new hard drive for my old G5 computer that my husband uses. His crashed. If you did it all over again would you buy the same new hard drive? If so, where did you buy it? I don't even know where to start and was SO happy to find this recent post on installing new drives into the G5. Any advice would be much appreciated. Thank you!
<Title Edited by Host>

I actually just ran across this hard drive oddity for the first time myself just yesterday. It seems that some older Macs may not be able to use the newest SATA interfaces on some hard drives.
I an attempt to not get overly technical, SATA is the current interface type on computer hard drives. You can get some additional information from Wikipedia at http://en.wikipedia.org/wiki/Serial_ATA. There are currently three revisions, SATA-1 (the oldest), SATA-2 (the current version), & SATA-3 (the latest and greatest).
So what happened was that my G5 could not use the SATA-3 drive I purchased because the computer could not support the SATA-3 standard. It was possible to "slow down" one of the other test SATA-3 drives to make it work like a SATA-2 and so it may be possible to do the same to other hard drives.
To answer your question, I would NOT purchase the saem hard drive for my Mac as it does not work for this older Mac.
My suggestion, if you can find one purchase the same hard drive that was in the computer. That way you know it is compatible. If you would like to upgrade, you will have to do some looking. Although I cannot recommend a specific drive, my two favorite companies are Seagate, www.seagate.com and Western Digitial, www.wdc.com. You most likely have a 3.5" drive, if you have a desktop, 2.5" for a laptop. WD has the Cavier line and Seagate has either Barrcuda or Momentus. What you are looking for is capacity.
So, both Seagate and Western Digital are good. You need a 3.5" drive for a desktop or 2.5" drive for a laptop. Stick with a SATA-2 drive also known as a SATA 3Gb/s drive for compatibility. Get a drive that is 7200 RPM or higher. Finally purchase the largest capacity at you can afford. Amazon is a good general place to been looking.
KWCitizen_Apple

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

Similar Messages

Maybe you are looking for