I have a new i phone6 and cant watch the photos i had in my old iphone 4- i can see in the i cloud a line showing last backup of my old i phone 4 but can't see the pictures i have there - tnx for the support
I have a new i phone6 and cant watch the photos i had in my old iphone 4- i can see in the i cloud a line showing last backup of my old i phone 4 but can't see the pictures i have there - tnx for the support
Yes.
Just call your provider and tell them what you want and they will help you get it done properly.
Similar Messages
-
New Apple TV and cant watch movies
My wife bought me a new Apple TV for Christmas, I get it all plugged up, install the new itunes, have home sharing on. I go and load all my music and everything works like a charm. I then go and load some movies, go to the TV to watch one, click on the movie and a black screen comes up with a spinning wheel, I assume it is trying to load, until 5 mins later and nothing has changed. I go back to itunes make sure I loaded everything right, can watch the movie in itunes just fine, go back to the tv and the same black screen. Again, my music works just fine, but can't seem to get the movies to work at all. Any suggestions out there ?
So this is where it gets confusing for me. There are two types of component inputs on my tv, Ycbcr and ypbpr. Ycbcr is digital and ypbpr is analog. I used the Ycbcr with my old apple tv which gave me a better signal.
Is it possible that this cable:
http://www.amazon.com/Component-Video-Stereo-Audio-Cable/dp/B001IUQB2W/ref=sr11?ie=UTF8&qid=1286927406&sr=8-1
Would work with Ycbcr because the hdmi output on the apple tv 2 is digital only?
Then the next question is if hdmi digital over Ycbcr will work with hdcp. I am currently using a MacBook for my tv needs and do not have the new apple tv so I cannot test this out, but I have debated about the new apple tv, which would work nice with my iPad and airplay but my tv does not have hdmi input, even though it is 720p capable.
Apple probably didn't include the hdmi analog ability because it doesn't support hdcp. Ironic though since jobs stated years ago he is sick of drm tech.
Laters -
My daughter has put a new passcode in and cant remember the number how can i reset it?
My daughter has put a passcode in on her ipod touch and now she casnt remember what it is!! how do i reset it? please help
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPod.
You have to use recovery mode
http://support.apple.com/kb/HT1808 -
is there any support somewhere f****g tired of renting movie i cant end and waste money
You can try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page. -
i had lost my old I phone 4s and bought a new one but now i found my old one and its been so long i cant remember the pass code to unlock it what do i do
http://support.apple.com/kb/HT1212
-
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance -
I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.
It downloaded all my contacts, photo's with no problem. I called the number they gave me from my old phone and then turned it off. I then put the sim card in and charged the phone. I followed all the setup steps and no I cannot send any text or make any phone calls. I get a message that they cannot authenticate my phone to dial #8899 but get the same message.Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport -
I want to restart my iPhone 4 as I have simply purchased an 5c want to sell my iPhone4 but I made a new Apple id and I forgot the password to my old apple id and security questions also I tried the email way but nothing came through what do I do?
Hi If you use a new Apple ID when setting up new iPhone Any music or Apps you have paid for will be lost. If you want to use your Apple ID that you have go to apple/support/id/apple.com. Cheers Brian
-
I have a new macbook pro and want to transfer my Mail autofill from my old mac. Never used Time Machine or Migration Assistant -- looks complicated. Any easy way to do this?
caitlinfromcambridge wrote:
Thanks -- I would like to try this. I do not know how to reach hard drive from old mac to new. Can you help me with this?
There are two ways - you can boot your old Mac in Target Mode (reboot your Mac, and as soon as you hear the startup chime hold down the T key on the keyboard until you see the yellow/orange Firewire logo on screen). You can then use a FireWire cable to connect your new mac to your old one. The old Mac hard drive will appear on your new Mac as if it is an external hard drive.
Details on Target Disk Mode: http://support.apple.com/kb/ht1661
If you don't have a firewire cable but you do have a home network (i.e. both computers can access the Internet at the same time), you can share the hard drive on your old Mac and then connect to it on your new Mac.
Good article on sharing your hard drive: http://support.apple.com/kb/HT1549
Finally, if the above doesn't thrill you, you can hook an external drive to your old Mac, copy the mail folder over to it, then connect the external drive to your new Mac and copy it over. It's two steps, but if you don't have a firewire cable and aren't comfortable with sharing over a network it will work just as well - you just have to wait for the mail folder to copy twice instead of once.
If you get stuck post back! -
Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
KarunakarHi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban -
How can I save the update download file as I have several devises to upgrade and cant afford the bandwidth to do each via iTunes.
There does not appeare to be any doenloadable files in the download section."Well that's totally unacceptable."
Actually you can only accept it, as it is the way it is. You may not like it, but it is so. Sorry.
" your seriously telling me that Apple expect me to download the same huge file 8 TIMES"
That is exactly what I am telling you.
" No way."
Still true.
"Apple are going to have to come up with another solution."
No. They do not have to do any such thing. They may choose to do so in the future, but there is no reason to believe that they will. -
The computer insnt letting me update the new itunes. So i deleted it all and now it ses when i try to download a new one that it cant delet the old itunes ... what could i do
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
was wondering .old 3gs phone stolen but wasnt being used info was deleted but music was left on it .i have sir# plus it has no sim card and hasnt been unlockd by carirer
lol no was thinking maybe i could find the person lot more then the phone involved
-
I had a replacement iphone 4 sent from apple through the service plan and now need to change carriers, orange dont now have my imei registered on their database and cant process the unlock can i unlock another way without jailbreak?
Hi philhardinges,
You can ask Apple support for the replacement receipt, this receipt would have the old iphone information(including Imei) and the replacement iphone information.
I had a problem like you and they sent me that information, then with the old imei you can unlock your iphone
Another way to take the old iphone imei, you can look for the original iphone box, yep, the one i hope you saved carefully somewhere in your house hahaha. The imei is showed on the bottom of the box down-right corner.
Hope this information can help you.
Best regards -
Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
Maybe you are looking for
-
How to Config Special Error Page for TIME OUT ONLY
We can config our own error page for webdynpro applications by using transaction code SICF. thus the customizing error page will show when program meet some errors. these errors type include ABAP runtime dump/page time out etc. Here is my question, i
-
"Partner function may not be changed"
While trying to change the "responsible employee" of an already released contract, system gives an error "Partner function may not be changed". Can anyone help me with this issue....
-
Hp pavillion Dv202130ea sound not completely muting
Hi Guys & Girls I have a intel T5500 166 Mhz dv2130ea that i believe was running on xp i built it up from spares and keep it as a spare because we have quite a few laptops in our household for the grand children and my sons etc the problem with
-
Usage of Microsoft Communicator
Hi all, is there a way to implement the Microsoft Communicator directly to the Enterprise Portal (based on NetWeaver '04)? I do not want to launch the Communicator via the standard SAP Collaboration Launch Pad. Rather I need an iView which directly
-
My new Iphone will not start up, when I go to charge it all it does is beep every 2 seconds
My Iphone will not come on, all it does is beep every 2 seconds.