I have a new logic board and fce is asking for my serial number from packaging , which has long gone- help?

final cut express
I have a new logic board and fce is asking for my serial number from packaging , which has long gone- help?

Without the serial number your FCE disc is useless and nobody here can help.
Your only chance, if you have the receipt or can prove your purchase is to contact Apple and hope they may be able to help.

Similar Messages

  • I just upgraded to 9.1.4, and am being asked for the serial number from my packaging, which unfortunately is 1000 miles away at the moment. Any way I can get it from Apple or something? Thanks.

    Just upgraded to 9.1.4, now being asked for a serial number from my packaging, which is 1000 miles away at the moment. Any way out of this? Thanks.

    Add me to the list. This is a nuisance.
    Fortunately, if i click on cancel, Logic will start the next time i run it without asking me. (But it asks again the third time i run it, and so forth - really strange!)
    Please report this bug to Apple! http://www.apple.com/feedback/logicpro.html
    Fox

  • I downloaded Logic Pro and they are asking for a serial number

    I need answers, please

    CaliPharaoh wrote:
    billing support directed me here
    Yes, Apple goes for free support whenever they can get it.
    Most serial problems come from having a previous version, since you haven't Bluesberry's advice seems the best option.
    There might be a "com.apple.reglogicstudio"  file in Root/Library/Preferences that should be deleted, (if it's there).

  • I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

    I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

    Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
    My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

  • HT201412 I have a new iPad Air and it is asking for my Passcode which I thought i knew but it is not turning on with the code I thought I entered?

    I have a new iPad Air and it is asking for my Passcode which I thought I knew , but it is not turning on with the code I tought I had entered?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Creative cloud keeps asking me to license my software and then it asks for a serial number

    it keeps asking me to license my software and then it asks for a serial number, i do not have a serial number with creative cloud just a order number what do I do?

    For me this guideline helped:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    In my case, I had to remove the following lines from the hosts file:
    120.0.0.1 lmlicenses.wip4.adobe.com
    127.0.0.1 lm.licenses.adobe.com
    After that all worked again. Hope this helps.
    Jan

  • I'm trying to open the photoshop and it's asking for a serial number  how can i gent a serial number for photoshop, i buy it here

    i'm trying to open the photoshop and it's asking for a serial number  how can i gent a serial number for photoshop, i buy the photoshop here

    What version of Photoshop are you using?
    Did you purchase it outright, or do you have a subscription?
    Gene

  • I just updated my Light room to the 5.7 and now it ask for a serial number?

    I just updated my Light room to the 5.7 and now it ask for a serial number when I try to open it, I have the CC plan,anyone know what I should do? Support didn't help much in chat.

    You have probably downloaded the standalone version and installed it. It will have to be removed,, and then you will be able to install from the CC application manager.

  • I've purchased Flash CC 2014 and it is asking for the serial number, where can I find it??

    I've purchased Flash CC 2014 and it is asking for the serial number, where can I find it??

    you don't use a serial number with your cc subscription.  you use your adobe id.
    close flash > open your cc desktop app > sign out of your app > sign back in to your app being careful to use the exact adobe id you used to subscribe to cc. > open flash pro.

  • I am an active member and I am trying to install Abobe Acrobat XI Pro and it is asking for my serial number. Where can I find that information?

    I am an active member and I am trying to install Abobe Acrobat XI Pro and it is asking for my serial number. Where can I find that information?

    Hey jamesl12995614,
    Could you please let me know if you are using subscription or bought Acrobat as a one-time purchase.
    If its a subscription, then all you need is to sign in at adobe.com using your Adobe credentials and download the software.
    Otherwise, you might refer the KB doc link mentioned below to find your serial number:
    Find your serial number quickly
    Hope it helps.
    Regards,
    Anubha

  • Trying to instal photoshop and it is asking for a serial number what is this.also is my user ID my email address

    Trying to instal Photoshop and being asked for a serial number
    What is this ,no record of receipt of one
    Also is my email address my user Id

    That would be the email address and password you set up with Adobe. Just sign in.

  • I have final cut pro 5 and it keeps asking for my serial every time i open it again. What can I do?

    Everytime I open up Final Cut Pro I have to enter my name and my serial. It's annoying to have to do every try. Does anyone know what's wrong or what I can do?
    I have final cut pro 6(the one that came with final cut studio 2)

    Have you recently updated anything or re installed FCP.
    DM

  • I have downloaded pro and it keeps asking for a serial number.  I do not have one how do I get one sent to me

    I need my serial number for my paid subscription how do I get it

    Precast238 this is likely due to a connection error between the computer and our activation server.  Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error.

  • I brought iworks 09 for my macbook and it is asking for a serial number

    I brought the iworks 09  dvd for my macbook and I downloaded the file but it is asking for a purchased serial number

    Kappy thanks for the quick response.  I did that in the beginning of the setup and reset my password, or thought I did, and when I went back to the setup screen it still asked me for my @me.com iCloud password.  What I did do was go to system preferences, iCloud and was able to change the @me.com login to my current iCloud login and that seemed to work.  It did not strike me to do that until after I sent this email out to the world. 
    I do have another question.  I setup Yosemite on my Mac Book Pro and under Security and Privacy and under Filevault I set that up.  However, I thought it was going to give me some recovery key that I had to remember to access data.  However, it did not provide me a recovery key after it was setup.  How do I get that recovery key?  Thanks again. 

  • TS3297 i forgot my security questions answers, have a new apple computer and it is asking for the answers

    how do i reset my security questions

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Maybe you are looking for

  • Can I set an af:setActionListener on the search button of a af:query ?

    Hi, I want to store a flag in the session scope when the search button of an <af:query> form is pressed. The flag is used to determine if the query has been executed and the result table iterator should provide the result. I'm still looking for a sol

  • Execution of entity validation multiple times (adf bc 10g)

    Implementing entity method validators sometimes causes the validation (e.g. validateEntity method) to execute multiple times. We have figured out that this case occurs when we call method setAttribute programmatically when we implement business rules

  • Using BEx 7 Query in BEx 3.x Web Template

    Hi Experts, I was wondering whether it is possible to use 7 Queries in 3.x Web Templates?! I would like to run the Templates without any EP installation but with the features of BEx 7 Query Designer. Is this possible? Thanks & Cheers Tobias

  • File System Location properties: view path (OWB 11..2.0.1 Windows)

    Newbee question: From the tutorial "Handling Flat File and COBOL Copybook Sources in Mappings", I imported the metadata for ETL_OWNER. It contains file locations such as SRC_FLAT_FILES_LOCATION but I cannot find any way to view its path in the file s

  • Layer Styles Grayed Out (PSE6 Mac)

    I want to add a glow effect to some text, i have it in a seperate layer to the background, but when i try and clik on layers -> layer style -> style settings it is grayed out and unclickable!!!!!! HELP ME