I have a new m276nw printer that does not scan straight from flatbed or auto feed

HP Lawerjet Pro 200 Color MFP M276nw, When scanning from the auto feed or the flatbed, scans come out crooked

Hi,
How about printing? do the print outs come out fine?
open the ADF bed cover and check if the scanner assemble is aligned in line?
also try connecting it to a direct wall outlet.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

  • How do I hook up MIDI to my Mac? I have a new I/O that does not have MIDI in/out.

    How do I hook up MIDI to my Mac? I have a new I/O that does not have MIDI in/out. I do have a M-audio Midisport 1x1.

    Yall rock.  Just tested Back to my Mac with my phone's hotspot and it worked!  and so does airplay!  Much Much appreciated!!
    For double NAT the reset didn't work at first and I had to unplug all the connections but eventually got it back.  I also checked "Enable detection of router-behind-router conditions" in the RG.  Not sure if that did anything but I'm not seeing any AE warnings anymore. 
    Thanks again!

  • Does anyone have a new ONT unit that does not make a beeping sound if you unplug the battery?

    Hi everyone,
    Anyone here that have a Verizon FiOS ONT unit that doesn't beep when you unplug the battery? 
    Apparently the new unit alarm noise is supposed to turn off when you remove the battery. 
    FiOS ONT Battery
    I have an older model that continuously beeps if the battery is bad and if it's unplug.  Basically, the box demands a new battery.
    I called Verizon and asked them to install a new ONT Battery box because I believe the new one won't beep if the battery is unplug via their instructions.  They are coming in a couple of days.
    I just want some confirmation from users that the new box doesn't make the beeping noise if the battery is unplug.

    You can now opt out of the battery at the time of install, if you do then the tech should disable the alarm at that time. Otherwise you can disable the alarm by removing the batter and THEN rebooting the system by unplugging the power supply while the battery is unplugged. you plug it back in and the system reboots and it should recognize there is no battery upon reboot and then it should not beep anymore. If it does still beep then yeah your going to need that dispatch.

  • HT1443 I have a macbook with mac osx 10.5.8 and i have a new hp printer that requires mac osx v10.6 or mac osx v10.7. do i need to upgrade and if so how do i do it and which version should be downloaded

    I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks

    Full instructions here:
    https://discussions.apple.com/thread/4540761

  • I have a new iPod touch that will not turn on, nor will it connect to iTunes.  Any suggestions?

    I have a new iPod touch that will not turn on, nor will it connect to iTunes.  Any suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a new hard drive. iPhoto does not show as purchased in App Store although I had it on the old hard drive. How do I reinstall it without buying it again?

    I have a new hard drive. iPhoto does not show as purchased in App Store although I had it on the old hard drive. How do I reinstall it without buying it?
    Thank you.
    John

    Depends on where you got it - if it came on yoru compujter then you need to have accepeted it in the App store - and it will be in your purchases when you log in with the Apple ID that you used to set up your computer - it mahy be hidden - if you do not find it unhide applications in teh App store
    LN

  • TS1398 After updating to ios 6 my iphone 4 would no longer connect to my home wifi. At work we have a free wifi connection that does not require a password. However my wifi at home is password protected. I have the right password. It works on my ipod touc

    After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!

    I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
         One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
         to do this on a motorola router: type 192.168.0.1 in your address bar.
    username: admin and password:motorola if you have not changed the factory defaults.
    Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
    The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
    There is a fair bit of buzz about this issue out there, some other things I've seen:
    This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
    Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
    IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
    Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
    Good luck, more to come if I figure out anything else, and please post any solutions you may find.

  • HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

    I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

    See #5
    Step by Step to fix your Mac

  • I have an itunes gift card that does not work what should I do?

    I have an itunes gift card that does not work what should I do?

    Give me more details (but don't state the code).

  • How to import iDVD app from Time Capsule to my new iMac 21" that does not have iDVD?  I can find the iDVD app in the Time Capsule, then what?

    I have a new 21" iMac to replace a 6-year old iMac 24.  My Time Capsule has the iDVD app saved (?) and I can find it, but I can't figure out how to move it to my new iMac that does not have the app.  How to do this?

    You are probably better to install it from ilife disk.
    Can't Find a update or latest Version of iDVD to Download or a Compatibility to Yosemite

  • I have an old account with purchased songs in it,however I have a new account now which does not allow me to listen to this purchased music.I have tried changing the password but to no avail.Please help

    The problem is I have an old account from an old I-pod which is now broken.Well the I-pod has been binned.I have a new i-pod and have a new user name.I have tried to access the songs i purchased yeateryear on my old device but and this  is a but .....The new account will not allow me to access these older purchased songs. I cannot listen to them or burn them onto a cd.It throws up my old account user name in a window with a password request to access this material.I have changed my password several times however I still cannot access these purchased songs.

    iPods (that are not iPod touch) are not directly linked to any "account."  They are associated with your iTunes library.  The account in iTunes is your Apple ID, which is used to purchase and download content from the iTunes Store.  It lets the iTunes Store know who you are when you sign in.
    Songs that are currently sold by the iTunes Store do not use DRM (copy protection).  However, songs purchased during the earlier days of the iTunes Store do use DRM.  If you have such songs that were purchased using a previous Apple ID (not your current Apple ID), you need to authorize your computer for that previous Apple ID.
    Find one of the songs that does not play due to this problem.  Right-click on it in any iTunes list, and select Get Info.  On the song's Info window Summary tab, look for Apple ID.  That is the Apple ID used to purchase this song.
    From the iTunes menu bar, under Store, select Authorize This Computer.  In the dialog window that appears, enter that Apple ID used to make the old song purchases (plus password).  Do not enter your current Apple ID and password.  Click Authorize.
    The computer is now authorized for BOTH your old Apple ID and your current Apple ID.

  • How do I print from a printer that does not support airprint?

    I have an ipad and would like to print photographs and e-mails from it via my Lexmark Pro901 wireless printer which does not seem to support Airprint,   Can anyone help please?

    Lexmark has an app I believe.
    Or you can look into third party apps. I use Print n Share, but i also see print central and printopia recommended

  • I have a sonos music system that does not yet work with Lion and will not for about 3-weeks.  I need to uninstall lion and go back to snow leopard, how do I do that?

    I have a Sonos music system that is not yet compatible with Lion and will not be for several weeks.  How do I uninstall Lion and go back to Snow Leopard?

    While we all have MacBooks only a few have Lion. There's a Lion Support Community. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • HT1539 I have the new imac and it does not have a dvd drive. How can I download digital copy of a movie?

    Some Blu rays and DVDs come with digital copies and you inset them into the dvd drive and it downloads the movie to itunes and then you can put them on any iDevice. The new iMac does not have a dvd or disc drive. What can I do?

    You will either need to borrow or purchase an external DVD drive, or if you have access to another computer that has a DVD drive you may be able to use Remote Disk:
    http://support.apple.com/kb/HT5287
    Regards.

  • I have loaded new software and iMessages does not appear to be working.  All messages appear as in delivered but they will send to the same address on my iPhone.

    I messages does not appear to be working on iPad every time I type a message it comes up as in delivered but I can type the same message on my iPhone and it works straight away

    MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly.  I would think that someone would be intelligent enough to do that before buying a new device, but......
    iMessage could be an activation issue or a network issue.
    Have you tried Settings > General > Reset > Reset Network Settings?
    Does iMessage work consistently on Wi-Fi?

Maybe you are looking for