I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
  Apple Retail Store - Genius Bar

Similar Messages

  • I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine

    I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine - files too big
    Please assist

    You need to download it on one of the iMacs via App store but not install since after it installs the installation download gets deleted.
    After it is downloaded you can copy to a USB device. You can also make a bootable USB install device by:
    downloading and using DiskMaker X

  • I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

    I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does  not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

    I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

  • I have a new Mac Mini, and I want to send raw video...

    I have a new Mac Mini (Lion), and I want to send raw video to the Internet, using Ustream, Skype or other services. I don't need cameras, microphones, or other periphrals. My video consists of 1 volt composite (from a video switcher), and the audio is full stereo at 600 ohm line level on each channel. What do I need?
    I have a video capture card on my Windows machine; but the results have been crappy at best. And the so-called "Geek Squad" at Best Buy (where I bought the Mac Mini) have been less than helpfull. Further, the on-line Apple Store shows nothing. Maybe someone here has an idea.

    You are going to need a video capture device of some sort and I believe the following will be suitable.
    http://www.elgato.com/elgato/int/mainmenu/products/Video-Capture/product1.en.htm l
    It is available in the US as well http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

  • I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

    I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

    I suspect the monitor has an ADC connector
    http://en.wikipedia.org/wiki/Apple_Display_Connector
    If so you need one of these:
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
    Otherwise what connector is on the monitor?

  • Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

    Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

    Adobe - Lightroom : For Macintosh
    Hal

  • I have been sync'ing my iPad  2 with Windows XP. Now I have a new mac mini and want to switch to this new computer.  How do I save the info on my pad?

    I have been syncing my I Pad 2 with a pc running windows xp.  Now I have a new mac mini and want to switch the syncing to the mac.  What do I do to protect the information and purchased apps on my I pad? 

    Backup and Restore
    http://support.apple.com/kb/ht1766

  • HT4410 I have a new mac mini, do I have enough space to download Windows 7, and can I just download the software or purchase a disc?

    I have a new mac mini, do I have enough space to download Windows 7, and can I do it through online purchase or disc?  My bootcamp assistant mentions using a USB flash drive??? 

    Yes you do have enough storage, you only need let's say 10GB to properly install Windows with a few (very small) programs. You'd be best of just going to a store and buying a Windows 7 install DVD (not an upgrade one!), or using one that you might have laying around at home. You can also purchase Windows 7 via the Microsoft online store and than burn it to a DVD. It is possible that installing from a USB-drive works, but I have not tried this yet.

  • I have a new mac mini with mt lion where is the os on this computer

    I have a new mac mini with mt lion where is the os on this computer. It came with Mt Lion on it

    You have a couple of options for booting OS X.
    One is to use the OS X Recovery Disk Assistant to copy the Mountain Lion Recovery HD to a USB thumb drive. A 4GB thumb drive is sufficient as the Disk Assistant only needs 1GB.
    A second option would be to use a cloning software like SuperDuper or Carbon Copy Cloner to clone your existing Macintosh HD to an external USB drive. This would give you an external bootable copy of what you have now.

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    http://www.apple.com/osx/uptodate/

  • HT201269 I have a new ipad mini.  I want to download all the music I have on my Apple iPod nano MA428.  Can I do this?  If so, how do I go about it?

    I have a new ipad mini.  I want to download all the music I have on my old Apple iPod nano MA428.  Can I do this?  If so, how do I go about it?

    You should be storing your music on a computer that you sync your iPad mini to. You can then sync your iPod to the same computer to copy over the music to the iPod.

  • Have a new mac desktop that I want to use for syncing i-pad currently synced with old pc which I will be sicarding.  How do I switch computers with my I-pad??

    have a new mac desktop that I want to use for syncing i-pad.  Currently synced to an old pc that I will not be using any
    longer How do I switch computers for syncing?

    The absolute best way to do this is to transfer your iTunes library from the old computer to the new one. You can find a numbr of ways to do that here.
    http://www.google.com/search?client=safari&rls=en&q=transfer+iTunes+library+to+a nother+computer&ie=UTF-8&oe=UTF-8
    If you want to spend the money for a computer application that will let you transfer all of the content from the iPad to iTunes - look at
    Touchcopy
    However, I have posted this many times over the past few months. If you follow these instructions you should be fine. This will transfer the purchased content from the iPad into iTunes on the Mac. You will still want to get your photo library and any CD's that you imported into iTunes on the new Mac. That is why transferring the iTunes library to the new Mac is the best way to go.
    When you set up the new Mac - if you can import or migrate all of the PC content onto the Mac - this will all be a non issue, but I'm not sure how to bring all of your PC content onto the Mac. Going from an old Mac to a new Mac was a breeze, but I know nothing about transferring the content from a Windows PC.
    The 3 basic things to remember - authorize the computer, (Launch iTunes on your computer and go to Store>Authorize this Computer) transfer purchased content and backup.
    The following was copied from this thread. This is essentially what you want to accomplish.
    https://discussions.apple.com/message/11527071#11527071
    1) Without connecting your iPad to your Mac, start iTunes. Click on iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    2) Now connect your iPad to your Mac and start iTunes.
    3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
    4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
    5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
    6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
    If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
    Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your PC. Look at Photo Transfer App in the App store and you can search for others as well.
    https://discussions.apple.com/message/13016026#13016026
    This support site will help you with transferring iTunes music to your new computer - if you have an iTunes library of music on another computer or hard drive.
    http://support.apple.com/kb/HT4527
    The worst case scenario is that you can download all of your apps again if needed - but you will not retain the data or app settings - but it is always an option if everything else fails - but it won't fail!

  • How can I get alerts if a Wireless Access Point has been disconneted from the network?

    How can I get alerts if a Wireless Access Point has been disconneted from the network?
    Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
    Thanks in advance.

    Hi,
    The below link will answer ur question!!
    http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
    Please dont forget to rate the usefull posts!!
    Regards
    Surendra

Maybe you are looking for

  • Windows not recognizing iPod mini

    When I connect my iPod mini to my computer, nothing happens. It is not recognized by iTunes or explorer. I can get the iPod to charge if I reset it while it's plugged in, but otherwise nothing happens. I tried plugging it in to an old laptop that I h

  • Problem in pricing determination in VA03

    Hi All, I am facing in pricing determination. There is inconsistency problem for pricing determination. For one of condition type ZCN1, we have maintained the price in condition record(VK11) but even after than the condition record does not get copie

  • Hiring new employee with HR_MAINTAIN_MASTERDATA

    Hi, I am trying to hire new employee with HR_MAINTAIN_MASTERDATA. For now, I only gives the mandatory values of the infotype 0002 in proposed_values and parameters to the FM. CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'      EXPORTING        pernr         

  • Duplicates in iphoto 11 after Duplicate Annihilator used

    I have photos showing up as duplicate, triplicate and quads in Recent 'Last 18 Months' of iphoto after using duplicate annihilator successfully in the main library.  How to I clean that?

  • Volume manager or zfs

    I have veritas volume manager in a couple of systems. Zfs is it similar ? I read the documentation, and, the pool disk creation, file systems depend of the pool of disk. Its like veritas. What is the big difference ?