I have a new MacBook Pro running 10.6.6 and firefox won't launch after downloading

I bought a new MacBookPro and the computer is running fine. I tried running firefox 3.6.12 or 3.6.15. They downloaded (via safari) fine but when I tried to open them (after the permission dialogue box), nothing happens and they fail to launch. All my other programs are running fine so I suspect it is a compatibility problem.
Please advise a solution.

Are you sure your Mac Book Pro has Thunderbolt (lightning symbol next to the port) and not Mini DisplayPort (rectangle symbol)?

Similar Messages

HT1386 I have an 80 gig ipod classic. I have a new Macbook Pro running 10.8.2 and I can't get my current podcasts to sync onto my iPod. I have restored the ipod and dragged the current podcasts to the add list to no avail. What is up?

I have an 80 gig ipod classic. I have a new Macbook Pro running 10.8.2 and I can't get my current podcasts to sync onto my iPod. I have restored the ipod and dragged the current podcasts to the add list to no avail. What is up?

I have an 80 gig ipod classic. I have a new Macbook Pro running 10.8.2 and I can't get my current podcasts to sync onto my iPod. I have restored the ipod and dragged the current podcasts to the add list to no avail. What is up?

I have a new macbook pro running lion and want to update the software on my ipod touch. My old macbook ran 10.4.11 and won't update - but the new computer says I have to update on the computer I normally sync on or my music will be lost. Solution?

I have a new macbook pro running lion and want to update to ios 5 on my ipod touch. My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5. But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost. Is there any solution for this?

try exporting your iTunes libary from the old computer to the new one
take a look at this from apple
http://support.apple.com/kb/HT4527
I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
Mike

I have a new Macbook Pro running Mavericks and safari consistently freezes. It takes several 'return/enter' presses to get to the page I requested. I have seen other comments and replies on how to fix (clear cache, clear extensions/plug-ins), to no avail.

I have a new macbook pro running mavericks and only using Safari as my browser. 75% of my url requests are 'hung up' and freeze. I have seen other posts and have tried to clear cache, reset safari, remove extensions, but to no avail.
Any recommendations?

If it works in a new user account, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

I have a new macbook pro and it freezes and email wont close

I have a new macbook pro about 6 weeks old and it is freezing when i walk away for a few minutes it goes tosleep and will not wake up until i hold power button to power off and then power on again. Also at about a week old it would not close email and that froze. Not sure what is wrong with this computer.

Visit macupdate.com where you will find several utilities that will do that. You can also do it using Preview in your Applications folder or with TextEdit.

I have a new MacBook Pro. I keep getting the message (from all different programs) that they would like to access the keychain "login". I have run keychain repair, and it won't stop!

I have a new MacBook Pro. I keep getting the message "Mail would like to use your keychain "login". How can I make this stop? I have run the keychain repair utility.

Hi,
With the Finder as the Front app go to the Go Menu > GO to Folder.
Copy and Paste the bold text below into the text field
~/Library/Keychains
Highlight the Keychain.
Use the CMD + i Keys together (Keystrokes for Get Info from the File Menu)
In the Info Panel that appears check the Ownership and Permission bit at the bottom.
Example Pic
Unlock Padlock
Check your Shortmname Appears (the (Me) one).
Open the Cogwheel icon
If it is Greyed Out to "Make "Shortname (Me)" owner then you are the Owner.
Check you have Read and Write Permissions.
You may need to check the Ownership and Permission on the ~/Library itself (you can do the same Get Info on Folders as well as Files)
If you don't Own it then, when you have changed that also Apply to Contents.
10:12 PM Tuesday; August 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have a new MacBook Pro with iPhoto installed. I edit photos, mainly photo orientation via rotating, but when I go back to run a slideshow the changes weren't saved and the photo is back to vertical...please help...thanks

I have a new MacBook Pro with Iphoto installed when purchased. When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation. However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved. Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM

what version of iPhoto and of the OS?
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

HT1222 I have a new MacBook Pro and running Windows 7 on that side with Parallels. My Windows side keeps locking up. Help

I have a new MacBook Pro and running Windows 7 on that side with Parallels. My Windows side keeps locking up. Help

You should be able to get the CS3 programs installed and running on the new pc since CS3 is spec-ed for Windows 7 Service Pack 1. Downloading the programs does not require a serial number. You can find them here: Download CS3 products but you will need the serial number to activate the programs. You might be able to find that thru your Adobe account online.
You will not be able to install the CS5 Mac version on a PC and you won't be able to trade it to a PC version either due to it being an older version. Trades are allowed only for the latest version (CS6)

I have a new Macbook Pro. All data from prior Mac was migrated to new Mac. If I run Time Machine and "inherit" the old backups will TM take up where I left off, or delete and overwrite the current data?

I have a new Macbook Pro. All data from prior Mac was migrated to the new Mac. I want to continue Time Machine on the new Mac and retain the history. An option is to "inherit" the old Time Machine. I want to make sure this does not errase the current data, but creates a current backup.

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

Should i get lion if i have a new macbook pro? (i dont have any old programs)

i have a new macbook pro! should i get lion? i dont mind paying the $ 30. my only real concern would be the bugs! i have heard alot about the bugs in lion! i would mainly use it for school work and using imovie and idvd to burn my home movies. i would also use iphoto. both of these are 09 (havent ugraded yet because i have found no need). would they work with lion.
aslo i have one last big question. which should i get? iwork or micrsoft office 2008 or 10. i have a great deal from iwork users that its the best out there. i am migrateing from a pc so i am accoustom to office.
back to lion...
have you used it?
do you regert getting it?
why?
do you love it?
these questions will help me know what to do!
Thanks
austin

iWork! But Office 2008 or 2011 will run fine on Lion
Lion is awesome, and if you purchased your MacBook Pro since June 6th, go here to get a free copy> http://www.apple.com/macosx/uptodate/
The bugs are few and far apart

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

I have a new MacBook Pro running 10.6.6 and firefox won't launch after downloading

Similar Messages

Maybe you are looking for