I have a new nikon D610. PS will not open the NEF files. it will not allow me to upgrade to ACR8.3R

I have a new camera - nikon D610
PS will not open the NEF files
PS tells me I have the latest version
ACR 8.3 will open the files but the system will not allow me to upgrade to ACR 8.3
What do I do?

anyone?

Similar Messages

  • Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

    Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

    Hi,
    CS6
    Van: R_Kelly [email protected]
    Verzonden: maandag 16 september 2013 18:42
    Aan: Hans van Sloten
    Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    created by R_Kelly <http://forums.adobe.com/people/R_Kelly>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

  • I am trying to install new CAD software, but the computer will not open the ".dmg" file so the installation can begin.  H  E  L  P  !  !  !

    I am trying to install ViaCAD v7.2 for Mac, but when I try to open the ".dmg" file, it will not open, so the installation never begins.

    I was trying to find the system specifications ViaCAD v7.2 but wasn't too successful. However I found the App Store has V8.0.2, have you already purchased 7.2? If so perhaps you could request an exchange for a more current version.

  • Hi. My macbook pro will not open the video files taken on a panasonic hd-sd10. is there a mac version of hd writer software that comes with the panasonic camcorder?

    Hi. My macbook pro will not open the video files taken on a panasonic hd-sd10. is there a mac version of hd writer software that comes with the panasonic camcorder?
    Could do with some ideas.
    Thanks

    Ask Panasonic whether or not they provide OSX versions of the software.
    Google the issue

  • Purchased new camera nikon d7100 and camera raw will not open any nef files, talked to tech support and they assured me an update would fix issue, did update and have  same issue still

    I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?

    Good day!
    Please check this list to see which version of ACR supports the camera:
    Camera Raw plug-in | Supported cameras
    Then please check your version (Photoshop > About Plug-In > Camera Raw).
    As you should see your version is not up to the task.
    You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
    Regards,
    Pfaffenbichler

  • DNG conversion fail and Photoshop will not open my NEF files (Newbie question)

    Two part question. First, I just recently installed photoshop CS4 to my (windows vista) computer and I go to upload NEF photos to bridge and I check the box that says "Convert to DNG" and when it finishs uploading it says "Files successfully copied, However, DNG conversion failed." It says it everytime and I don't know what to do about that.
    Second part: I try to open my NEF files in photoshop it says "Could not complete your request because it is not the right type of document." I am using a Nikon D90 and I don't know if that has anything to do with this. I apologize if this question is in the wrong forum, I am new to this and I thought maybe camera raw had something to do with this at least.
    Thanks for any help

    You need to update your Camera Raw plug-in to either version 5.2 or 5.3RC, as well as the new DNG converter. They are available on the Adobe download page, and there are complete instructions for installation available there.

  • TS2518 I have Aperture 3.1.2 running on os 10.6.8. Aperture does not show focus points on my Nikon D7100, nor does it recognize the RAW files. Will upgrading Aperture allow me to see the focus points and RAW files again? Also, do I need to upgrade my os f

    I have aperture 3.1.2 running on os 10.6.8 mac book pro. Lost some features in aperature when I upgraded my camera (no longer shows focus points, does not recognize RAW files) Would like to upgrade to aperture 3.5, but do not want to loose any pictures in my extensive library. Do I have to upgrade one vesion at a time, or can I jump? I believe I also need to upgrade my os, but not sure which to do first?  Any help would be appreciated...

    1. Can I get Icloud without having to upgrade to OS Lion?
    Nope, you need 10.7.
    2. If I upgrade to OS Lion, does this automatically put me onto ICloud
    No, you set that up yourself.
    3. I have three mobile me email addresses. One for myself, one for my wife and one I use for my business. What happens to these.
    You can convert them to be used in iCloud.
    4. My wife and I also use mobile me to sync our calendars across an Ipad (original) and two Iphones (3Gs). Both Iphones and Ipad are still currently using IOS4, and I am reluctant to upgrade this to IOS 5 as I have heard some horror stories. If I fail to upgrade to IOS 5, will this create confusion with my Apple ID's. (There already is a lot of confusion with these- Apple appear to not have down their homework)
    If you don't change the settings you have now, I'm sure it will stay working.  I believe Apple is phasing out MobileMe and you'd be forced to upgrade eventually.
    5. Will Icloud allow me to transfer my Icalendar across seamlessly? This is Ical 4.04 whic came with my Imac. Does this get upgraded if I update to Lion?
    Yes, it will get upgraded.  I have my calendar on Lion and my iPhone 5.0.1 working seamlessly at the moment.  That doesn't mean you won't have problems because with new technology that can be expected.  Make sure you do a back up if you're worried about losing data.

  • I have updated my PSE9 and still can not open the RAW files from my new camera, I get an error?

    I bought a new camera (Canon T5i) and took photos in RAW, tried to open them in PSE9 and they wouldn't open. I got the following error...
    Canon RAW Codec found a new CR2 file that is not supported by the installed version.
    You can download the Canon RAW Codec update program from the link below.
    (Canon Server)
    I have been to the link & downloaded what update it had. I have also done the available updates on my PSE9 and I am still getting this error messge. When I called Canon regarding this they said I needed to contact Adobe.
    Can someone please tell me what I am doing wrong or not doing so I can open these files???

    The T5 is supported by Camera RAW 8.4 which needs PSE12. You can use the Canon software to convert RAW to TIF or the Adobe DNG Converter. The converter will convert the CR2 files to Adobes RAW DNG format that will open in PSE9's RAW processor. http://www.adobe.com/uk/products/photoshop/extend.displayTab2.html#downloads.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Hi, I need some help. Since I have changed to windows 7 I cannot open raw files with my canon mk 5D. The files will not open in cs4. Can somebody advise me what to do. I have done updates on CS4 and still cannot open the raw files

    Can anybody advise me what to do as I am having problems opening raw files on CS4 since I have changed to windows 7. I am using a canon mk 5D.

    dave nutter wrote:
    I am using a canon mk 5D.
    Actually, you're not.  That's not an accurate description of any of the Canon 5D models.
    There are EOS 5D, EOS 5D Mark II, and EOS 5D Mark III models.  Which do you have, specifically?  Details will matter for this.
    If you have a 5D Mark III (three) it's too new and you will not be able to directly open files with Photoshop CS4.  You'll either need a newer version of Photoshop or to use the free DNG converter.
    -Noel

  • Dreamweaver cc 2014.1 will not open the html files from my business catalyst site

    I just imported my business catalyst site (originally built with Muse) into dreamweaver.  the whole site downloaded as expected and dreamweaver maintains that the 2 folders have the same files.  When I click to open any file in Dreamweaver it appears to open and then close the file immediately giving no indication of a problem. 
    Anyone come across this and or have any idea what could be happening?  I can open these files in Text Wrangler.
    I have followed the steps of deleting preferences etc that I have come across in my search today.  None of those helped. 
    Files from other sites seem to be opening fine.
    Thank you.

    The only files I am encountering this issue with are the ones I downloaded from BC into a brand new folder.  Further, any new files that I create in Dreamweaver and then save to the local root folder of the site I downloaded from BC will no longer open after I close them.  I can open all of the files I downloaded from BC in text wrangler with no problem.  I have about 10 other sites I am having no issues with what so ever.
    I am considering this an isolated issue between Dreamweaver and the folder that I imported my BC site to as I have never had any other issue with using Dreamweaver. 
    But to answer your questions:
    1.  no
    2.  no issue
    3.  yes, no issue.
    4.  yes.  all of them.
    5.  not doing this one. 

  • I may have inadvertantly downloaded to Firefox 5 instead of 4 and can not open the application because it is not supported. Can I still download Firefox 4, which I intended to do?

    I wanted to upgrade from Firefox 3 to Firefox 4. But, after I completed the download and then tried to open the Firefox application, I received a pop-up message saying, "You cannot open the application "Firefox" because it is not supported on this architecture." Is it possible that I may have inadvertantly downloaded Firefox 5? I do not think that my system will support
    Firefox 5. I am not a techie, so I very much appreciate any help you can give me. Thank you.

    *Firefox 4 versions and later do not run on a PowerPC Mac.
    *Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/5.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • I was updating my apps from the App Store when the process quit unexpectedly. Now I can't open the update file nor will my safari launch. How do I get back on to safari and prevent the updates that did download from being installed?

    I can't launch safari after downloading so updates. HELP!

    Ashka, I have tried to "transfer purchases from device" but that is what I am saying that I do not see the app in the "mobile applications" directory after I do that process. I was wondering if anyone else knew of a way to get to the ipa file that is stored on the iPad such as a program that could browse the directories of the iPad of even an app that could do it so I can get and save the actual app in ipa format.

  • Quicktime X will only open the first file when launched.

    Hi,
    Here is my problem. After upgrading my MacBook 4,1 to Snow Leopard, video files should open in Quicktime X.
    What's happening is that, if Quicktime X in not launched yet, the first video file I double click on in my "Movies" folder will open in Quicktime X. But then, any subsequently doubled clicked file will not open at all, and console is returning this error message:
    QuickTime Player[5246] -[MGApplication _doOpenFiles:]: unrecognized selector sent to instance 0x100b0a890
    Could anybody help?
    Thanks in advance,
    Luc

    Once again, it has nothing to do with files that should only open in QT7. QT7 is already installed on my SL 10.6.1 and, yes, it opens the files that need to be opened with it.
    I'm talking about a wrong behavior of QT X here. It opens whatever video file appropriate for it the first time it launches, but THEN, subsequent double clicked video files THAT SHOULD OPEN WITH QT X are not opening at all, and the console is throwing this error message:
    QuickTime Player[5246] -[MGApplication _doOpenFiles:]: unrecognized selector sent to instance 0x100b0a890
    Then, if I quit QT X, and double click on the file that previously didn't open, QT X launches and display the file as should be.

  • How do i open my idvd project after I have saved it, when I look at the list of projects they are listed but they will not open the letters are like grey not black and it won't open  please help thanks

    I cannot open my saved idvd files the letters are grey not black and they won't open  can anyone help?

    Do the files you're trying to open have this extension:  .dvdproj ? How are you attempting to open them?
    OT

  • When I purchased my Mac six months ago, I transferred my Quicken data to Quicken Essentials which has worked well for me until yesterday.  Now Quicken Essentials will not open the data file.  What happened?  How do I get back in?

    When I purchased my Mac six months ago, I transferred my Quicken files to Quicken Essentials.  That worked fine until yesterday.  Now I'm getting messages that there is not application to open the files, or that it just plain can't open the file.  What gives here?  What happened?  How can I get back in?

    Launch the Quicken application and try to open the file from there, if you haven't already. If that fails, and a simple restart of the computer doesn't help, try reinstalling the application. If that doesn't cure the problem, I would suggest you take this up in the Quicken Community:
    https://qlc.intuit.com/app/full_page
    or with Quicken support:
    https://quicken.custhelp.com/app/contact/plvl1/win
    You'll be most likely to get further help with your issue there.
    Regards.

Maybe you are looking for

  • T510 w/ NVS 3100m can't show max resolution for a dell 30Inch

    T510 Docked Windows 7 64bit Dual-Link Cable attached to Dell 3007WFP monitor. Max Resolution is 1280x800 Ironically, I have a second monitor attached on the DVI port 2 Single Link and this is 1600x1200 NVIDIA NVS 3100m Why can't this display the max

  • ISL best practice

    Hello All, I have 2 MDS 9509 sitting across two sites on a same fabric with Intersite DWDN link = 1 Gbps I have 48 port blades and 12 port blades. Since the ISL max theoritical bandwidth is 1 Gbps, i think of locking the switch ISL ports at 1 Gbps (E

  • Edge running slow/not displaying some items on stage

    My project's growing quite large but I'm keeping everything very tidy and importing only small files (tiny PNGs, well compressed short videos, etc) but I've found the file slowing down and now it's not displaying some of my images and symbols. Also w

  • Error in snap id in sap

    i ws workin on my laptop standalone server.. and system shutdown .. and rebooted when i strated the server again it gives eror "snap-in creation failed"... the snap-in is not created,it may not be installed properly . name: sap r/3 manager CLSID:{633

  • Pass Value from one tab to another

    Hi, I have a requirement to pass a value from one tab to another. For ex: I have a CC&B page with two tabs (Main, Steps). In the Main tab, I choose a Field Activity. Once it is chosen, I want to pass the value of the Field Activity ID to the 'Steps'