I have a new wireless G broadband router.  I am attemptin...

I have a new wireless G broadband router. 
I am attempting to set up another computer. 
I am using EasyLink Advisor. 
It is askig for a router password. 
Where do I find the Router's Password?

While installing the router if you used any password it is asking you that password .... if you forgot that you need to reset the router by holding the reset button ... If you had not used any password.... use admin as password withoput any username ... See if it works ...

Similar Messages

  • BEFW11S4 - Wireless-B Broadband Router questions

    I have the BEFW11S4 - Wireless-B Broadband Router. Did it come with mac software originally? If so, is it possible to get the mac software from your company? Secondly, is there a way to disable the wireless signal on it and use it as a wired router? How would I do this? Would I do it in the network system preferences on my mac or would I need the software that came with the router originally?

    Hi…
    Linksys software CD does not operate on MAC  OS. But you can still use the router with MAC. To configure the router with MAC OS connect the MAC to any of the Ethernet port of the linksys router. Login into the router by typing http://192.168.1.1 ( Default IP )  in the address bar of the IE. Leave the Username field blank and type admin as password (If you have not changed the router password.) Using the user interface you can also disable the wireless function of the router.

  • Extend range of BEFW11S4 Wireless-B broadband router

    Hello,
    I curently have a linksys wireless-B broadband router (BEFW11S4) and would like to extend it's range, which device should I buy to accomplish this? I guess I could buy a linksys wireless-G access point (WAP54G), but I'm not sure it will work with an wireless-B router (BEFW11S4). Anyone, any ideas?
    thanks in advance,
    Joeri Kumbruck

    yes.... wap54g doesn't work with a wireless - b router.. it will work wirelessly only with another wap54g or wrt54g....even wap11 might not help you..
    if you have befw11s4 v 4...then you can try setting up a range expander with it...however , make sure that both the devices have the latest firmware.....

  • Linksys wireless N broadband router getting disconnected frequently

    I have a linksys wireless N broadband router which is connected to 3560 switch. My problem is that my linksys keep on disconnecting but my campus network is working nicely. But hosts which are connected to linksys are not getting access properly when i logged into the linkys and i do ip release and renew it gets connected and after some time its disconnected again  i logged into the linkys and again i do ip release and renew then its get connected again. I have been doing same to get internet access.
    Linkys gets ip through our DHCP server.
    I have reset the Linksys as well but still facing the same problem.
    Note-Our campus network is working fine only problem is with linkys.
    Thanks in Advance
    Khem

    If your using a WinXP you can download the tool that will automatically configure your router. Click here for the tool, then select Easylink Connect

  • I have just got new wireless fibre broadband for my home network. all my devices have joined fine, except my daughter's iphone 4s. Its just spinning!!!!!

    I have just got new wireless fibre broadband for my home network. all my devices have joined fine, except my daughter's iphone 4s. Its just spinning!!!!! Any ideas?

    Hello Noddy1964,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Update your device to the latest version of software.
    Best of luck,
    Mario

  • I need help to configure new wrt300n wireless and broadband router

    Just purchased the wrt300n wireless-n-broadband router. The router is not being found.  I have all the cat5 cables connected. I am running windows 2000 with a cable internet connection. There are 4 wired computers on the network I am trying to setup. The internet connection is great if I run it through the modem. I have run the cd-based wizard provided with the router a couple of times. No Luck! Please help!

    you have a cable modem?
    if so you need to reboot the cablemodem so it will see the mac address of the new device your adding to the network.
    if you have ADSL we shall take it a stage further.
    Regards Simon
    NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
    QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
    Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

  • I have on airport express that is 5  years old, I now have a new wireless router.  I want to  use the express just for air waving iTunes.  How do I set it up?

    I have on airport express that is 5  years old, I now have a new wireless router.  I want to  use the express just for air waving iTunes.  How do I set it up?

    Hello 84wvu,
    It sounds like you want to setup your Airport Express to Airplay music from iTunes.  I found an article with steps to help you get this setup:
    Connecting to an existing Wi-Fi network, exclusively for iTunes music
    AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
    Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
    How to Set It Up
    Connect your AirPort Express to your home stereo or powered speakers.
    From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
    Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
    I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
    Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
    http://support.apple.com/kb/ht4587
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • How to set up the airport express with a linksys wireless-g broadband router

    I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

    If that is all that is done, the Express would not provide more wireless coverage.  Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area.  As per my above comment, one Express connects via Ethernet to the Linksys.  The second Express provides the extension.
    You must have misunderstood what I was saying.
    Linksys is providing a wireless network.
    The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
    The Express is located on the other side of the house, for example.
    The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
    The Express is configured in Bridge Mode
    This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
    Although this is an "extended" network, it is technically known as a "roaming" network.
    This is what I was suggesting as a possible alternative without having to buy more hardware.

  • Wireless B Broadband Router (BEFW11S4) connects for only about 5 mins at a time

    I have Wireless B Broadband Router (BEFW11S4). Worked fine for about 2 years. I've had a HP Pavilion for about a year now using the wireless and also have a desktop I use on it (wired). About a month ago the speed seemed to be lagging a little and the router was never secured with a password, so I changed that and added a password. Ever since then the laptop will not stay connected for more than about 5 mins. I have gone back and removed the password protect feature, but still have the problem. It has a problem connecting to the router. The signal bars always seem to be full, but still can't connect. I've tryed reseting the router, unpluging everything, etc and can't get it to have a steady connection like before. Sometimes I can connect to the internet even when it says "Not connected" in the wireless network connection 2 screen. I've tried to search and find a similar problem, but was surprised to not be able to find one. Any insight will help.
    Thanks,
    Lman

    Thanks for the suggestions Wizzard. Although I did not know what all that stuff does, it didn't seem to help. I didn't not upgrade the firmware because there didn't seem to be any upgrades since 2003, before I bought it. Any other suggestions from anybody? Could anybody make an educated guess to whether it's the router or the laptop?
    Thanks,
    Lman

  • BEFW11S4 Wireless-B Broadband Router Issues

    I have been having issues with my router lately. It is a Linksys BEFW11S4 - Wireless-B Broadband Router. It has the latest firmware and everything which was from like, April of 2005 since this is an older router model. I've had it for about 3 years now and have had no problems until this past week. I have Verizon DSL. Anyway, my network connection seems to fail every so often at least 6 times a day at random times. I use WEP security encryption and everything. Every time it fails, I have to reset the router and go into administrator configurations and retype the password then it starts working again. But it is annoying since I just lose connection for no reason when I'm in the middle of something. Even when it fails, it does not indicate that I lost connection or that my connection is weak. It says that the signal is still excellent all the time even when it stopped working and the Internet light is still on. Odd. Does anyone have any idea what is wrong or is it time for me to buy a Wireless-G router instead and hope that fixes the problem? Again, I have had no issues with the router and it has been working great for nearly 3 years until this past week and I did nothing to mess with it. Maybe is it just that the hardware is worn-out? I dunno, I just want this problem solved.

    YouCanfindUs wrote:
    Bad DMZ + Portscan = Reboot. I’ve noticed that a portscan will cause the router to reboot if you have a bad DMZ host specified in the DMZ settings. The “Dummy DMZ” is a known method for stealthing Linksys routers, but apparently doesn’t work due to this problem. This problem has been confirmed on the DSLReports discussion board as a problem thats been around for a while, not just in 1.39.2. I’ve found that even with a valid DMZ host, a portscan will sill hose the router. If you turn on the “daignostic logging” (see hidden features section), you can see log entries that say [HH:MMS] Free=xxx, where xxx is getting smaller and smaller until it resets. (Note: this happened with default filtering settings, no spi, block wan, etc)
    UDP Traffic Can Cause Reboot. In much the same way as the DMZ problem, sending large amounts of UDP traffic can hose the wireless interface. I used QCheck to send 1mBit of information in 10 seconds from a desktop (wired) to a laptop (wireless). You can see the [HH:MMS] Free=xxx decline. When it gets to 0, the wireless interface activity light goes solid and the router locks. This bug hasn’t been confirmed yet on any message board or newsgroup. (Note: this happened with default filtering settings, no spi, block wan, etc)
    hmmm..just curious what model number are you referring to? Is it BEFW11S4 ver 1 or 2???
    Yesterday is history. Tomorrow is mystery. Today is a gift.

  • Wireless-B Broadband Router(BEFW11S4) Problem

    I bought a Wireless-B Broadband Router(BEFW11S4) from someone but it didn't came with the CD is there another way to install it like a driver or something like that

    There is no "driver" for your router.  Your router has firmware that resides on a flash memory chip in the router.  Check your router to see which version of the router you have.  This should be listed on the bottom of the router, near the serial number.
    To setup your router:
    First, download the User Guide from the Linksys web site:
    http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1115416835852&...
    Next, reset the router to factory defaults (see the User Guide for directions).
    Then go to Linksys.com > Support > Technical Support > EasyLink Home Networking Tools > then use EasyLink Connect to configure your router.
    Message Edited by toomanydonuts on 10-07-2007 05:36 AM

  • I have a new wireless printer. Where's the print button on an iPad?

    I have a new wireless printer. Where is the print button on my iPad?

    1. Buy a AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
    http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
    3. Start printing from your iPad without wire
    http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

  • HT4285 where is my os on this  I have a new wireless modum from at&t/new kaser net pc/ dell 18 inch monitor all hooked up

    I have a new wireless network modum from at&t, anew kaser net pc, and a older monitor 18 inch from dell have apple so i guess i have mac trying to find os can't I go to apple icon ,it says to choose about this mac that does not show on my computer what do i do? can somebody please help?from pam135

    It is not really clear what computer you have...you say a Kaser net PC and refer to a Dell monitor.  Do you also have a Macintosh computer?  If so, what kind do ou have?

  • I have a new wireless router and now my laptop will not recognize the printer.

    I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer.  Operating system is Windows XP.  Says it does not recognize the printer.  It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment.  Thanks.

    You must reinstall the full feature software and drivers again to be sure it will work with the new router.  This is the fastest way.  Simply follow the instructions that came with the printer.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Problems with 3 Wireless-G Broadband Router with SpeedBooster

    I bought 3 Wireless-G  Broadband Routers with speedboost. 
    They all had problems.  After buying a second one,  I figured the first one had a defect.  Then I had more problems.   Is this just more bad luck? Then I bought the third one, and still had problems, especially with the program it had me install on the pcs I had at home.  It just wouldn't keep a connection.  Then, most of the time I had to restart the router..  Shame, I thought to myself... I wondered if linksys knew about this router and its problems..   I even tried to upgrade the firmware, and it only had problems after that on one of the routers.  I just got a complaint from one of my friends about the router.  I had a feeling I knew what it was once she told me the problem it had.  Then I asked her the type a router it was. "Linksys" she told me and I told her my story with 3 bad routers. . It was weird..
    Oh, well, hopefully linksys will look it up and see what is up with the product.  Buying the 3 same routers and them not working was a little weird.  At least it wasn't working the way it should have.
    That is all from me..  I know this is a serious post, so reply all that want to.

    What you want to do is set up your wireless security.  The routers setup page
    (192.168.1.1) can only be accessed IF someone can get on your wireless network first.  Of course, you want to change this password to something other than 'admin' anyway.  This you can do by accessing the administration tab in the setup pages of the router by going here to see how it is done.   
    Now, you want to secure your wireless network by going here.

Maybe you are looking for

  • File does not have the correct plug inn while I made it in that programme

    Ever since I joined the creative cloud and I make a file in indesign, it is possible that the next time , I will not be able to open that file again because the plug ins can not be found or because the file was not stored properly. But then the next

  • How to use customer exit variable in the report

    Dear All, i want to use a standard customer exit variable in the report properties. In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from the

  • Two Apple IDs need to consolidate songs in Library

    I had an old Apple Id in which I purchased tunes.  The tunes are still in library.  I am unable to play them. because of the old Apple ID and required password. How do I consolidate or transfer these tunes to my new and current Apple ID ?  Thanks for

  • G5 just won't start up

    Can anyone help me? My G5 Powermac is less than two years old. Under warranty, after a power cut, it refused to start. It was mended by Apple. I bought a power surge protector. Today, the same thing happened again. Although the little light is on, th

  • When inserting a checkbox, how can I prevent the note box from appearing?

    To all, After -reluctantly- "upgrading" from Acrobat Pro 7 to Pro X I find this new version absolutely maddening. Pro 7's features were easy to find in the tool bar. Now in Pro X everything is "dumbed down" with everything "nested" into each other...