I have a new WRV210 router, and set it up fine - works as...
I have a new WRV210 router, and set it up fine - works as expected for about 5-10 hours then hangs - pull the power, and restart the device it works again. This is getting old fast.
I use if for a VPN ipsec tunnel - tunnel works great when it is working.
It is also used as a NAT behind an AT&T router getting a DHCP address for the WAN connection.
It has the latest firmware as listed on the web site 1.1.16
I was thinking about reflashing the firmware - any suggestions?
Steve
Hey try resetting the router reset button in such a way that power
light is blinking on the router & then do a complete network power
cycle i.e., unplug the power cables from the modem & from the router &
then plug in the power cable to the modem first once all the lights are
solid green you could plug in the power cable to the router & check out
it will definately work!!
Similar Messages
-
I have the new i-pad and cannot get signal at work. My original i-pad did not have this problem
I have the new i-pad and cannot get a signal at work. My original i-pad did not have this problem. Any clue?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I have a new wireless router and now my laptop will not recognize the printer.
I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer. Operating system is Windows XP. Says it does not recognize the printer. It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment. Thanks.
You must reinstall the full feature software and drivers again to be sure it will work with the new router. This is the fastest way. Simply follow the instructions that came with the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Have set up homesharing but am still unable to see library on secondary computer?? what am I doing wrong?
The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2 -
I have a new motorola router and modem in one, and I can no longer connect to my airport
Under network preferences it says "AirPort is connected to MOTOROLA-D192D and has the IP address 192.168.0.3., but when I open airport utility, it says there are no airport devices within range for my computer (and the orange light it flashing on the airport).
ajboon wrote:
I assume you mean I need to connect the Airport to the modem using an ethernet cable?
Yes.
ajboon wrote:
Because trying to do it wirelessly is not working...
That's normal. If you want to "extend" a network, an Airport can extend only a WiFi created by another Airport, not a non-Apple device. The only wireless connection that you can make to the Motorola WiFi is a "join" for the purpose of providing an AirPlay connection. -
I have a new iphone 5 and cannot get the bugs worked out. Is Iphone5 just a 'dud'? For starters, everytime I have a phone call, there is this loud screeching noise in the phone. Sometimes the other person can hear it and sometimes not. It is loud enough at times I just have to end the call. Also, this phone has problems with staying connected. Is the 4g that much different than the 3g? I have had a Iphone 4 for two years and loved it with no problems. This one has been a problem from day one. Get another one you say? Well, here's the kicker, I did. I sent the other one back because I am on ATT and they allowed me to send it back and get another one. The exact same problems as the first one. I don't know what to do. Any help would be appreciated.
Kappy's User Tip to deal with "Other": https://discussions.apple.com/docs/DOC-5142
Delete your messages. Remove the attached files such as pictures and videos. -
I have a new Linksys router. When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later. I am running 10.9.2, which apparently isn't supported by this Router. Any suggestions?
No they should be agnostic about what is behind them, but as to support for IP6, or whether any computers or tablets can use AC... and hasn't Apple's own units sometimes stop being supported with new Mac and new versions of OS X? seems so.
I said above, why would anyone install any kind of software to use a router? although Netgear's GEnie is or was installed on my systems that adds a nice way to log in and manage the router, so I have to take that back a notch.
Support for modems and ISPs is a concern, my modem is not certified fully with DOCSIS 3.0 or FIOS.
Look around and you can find routers having trouble with some network services like Airplay, printing and scanning, the software bundled with router.
However, ethernet chips, and the driver, can be a factor. Problems with Intel networking chip and high bandwidth streaming and not being able to handle the load when used by wifi euipment like notebooks and other devices.
I have only seen the LARGE number of complaints on MacBook forums about wifi issues to suspect something is wrong but not sure what. And those are people that depend on wifi I assume, though some could use their Thunderbolt equipped Mac to use ethernet to get around the problems. And I am seeing the same thing with some Windows users and maybe they all have common Intel chips???
MacBook Pro constantly losing wireless connectivity
I use Windows 8.1 primarily. I also don't know enough or as much to know "Why is the sky blue" either.
Just pass along this example:
If you're setting up a new PC for the first time, check if your router is fully compatible with Windows. Because of the new networking features in Windows (8.1), some older network routers aren't fully compatible and can cause problems. For a list of routers that are compatible with Windows 8.1 and Windows RT 8.1, go to the Windows Compatibility Center.
Anyone remember when 10.4.0 had so many issues with LAN that it could not be used, work on fix was going on and wasn't complete until 10.4.2/4.3 (and first time we got a new full 10.4.3 DVD because customers needed a reliable system. -
I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?
Hello 84wvu,
It sounds like you want to setup your Airport Express to Airplay music from iTunes. I found an article with steps to help you get this setup:
Connecting to an existing Wi-Fi network, exclusively for iTunes music
AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
How to Set It Up
Connect your AirPort Express to your home stereo or powered speakers.
From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
http://support.apple.com/kb/ht4587
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
I have a new laptop/pc, and I am trying to set up iTunes on it; but I want to keep content on an external drive (lots of movies/books/etc.). I know I will not be able to see when not hooked up to that drive, or sync with out it. What is the best way to go about setting this up.
Hi drnels,
Are you saying you still have access to the backup? If you do, you should take a look at [[Backing up your information]]. It will show you where all of your personal information is stored in Firefox and how you can copy it to a new install.
Hopefully this helps! -
I have a new iphone 5 and I can't pick up a wireless router that I could use with my old iphone 3GS. Is there an issue with the new iphone and is the antenna weaker than the 3GS?
Please read this :
https://discussions.apple.com/message/20053332?ac_cid=tw123456#20053332
Well I copyed it to you here.
Re: Anyone still having IOS 6 wifi issues?
created by mpa9366 in Using iPad - View the full discussion
Having done a lot of reading today and having found a very good online tablet magazine (will post link tomorrow) there seems to be a few tech bods onto the problem.
The magazine I was reading identified wifi problems within hours of the ios 6 release and have been analysing since then with almost daily updates - the story seems to be:
The apple authenthication transmission is normal, it should slip through event prior to a full handshake with the host network being completed - however if not authenthicated then apple will not permit the device to connect (kills the connection) this is designed to protect apple from counterfeiting. So thats problem 1 if you dont receive a token from apple.
Problem 2 is that ios 6 only supports ipv6 (the new ip protocol) whereas outside silicon valley a large proportion of routers modems etc are still ipv4 protocol.
So youre locked into ipv6 in a world where ipv4 devices are everywhere and apple have not allowed for the ability to handle both protocols. This is like GM telling you your car requires an upgrade, everything will improve etc and as part of the upgrade fits a fuel cell motor and stays silent when their upgraded vehicles are simply parked up because they cannot get fuel.
A very basic expectation would have been dual protocol handling - we know the HW supports ipv4 as all wad fine on ios5.
So its going to be hit and miss with networks - more hit than miss in techy areas like silicon valley, but more miss in places like where I am - a small town in rural Switzerland.
Only apple can fix this with a patch to enable ipv4 protocol handling.
There you go. you just need to buy a new router, I'm sure Apple has one for sale, cause it's not there fault for sure.
Wonder why people start to migrate to other devices ? -
The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)? I know that the monitor is able to accept this resolution but It can't seem to find it. Is it something to do with the new thunderbolt port? or the fact that I'm utilizing the VGA adaptor? I could go HDMI if that works better.
Use DVI or HDMI.
VGA runs out of steam after a while. -
my wife has an ipad in her name and i have purchased an iphone 5 and set up a new account, i cannot transfer tunes from my laptop to my iphone through home sharing what should i do TIA
Plug it in and sync it
-
I have a new iPhone 5c and it keeps asking me for my voicemail password. Is this where I begin the voicemail set-up?
Usually, the default voicemail password is your telephone number.
Contact your cell provider.
Maybe you are looking for
-
I would like to purchase spyware for my mac ...what should I get?
I'm looking for spyware that is compatible to my M ac. I need to monitor my children while they are on IM, social media and emails. Any suggestions?
-
Some background. The company I work for is almost all PC, however, our graphic designers run mac, for obvious reasons. I'm the only I.S. tech with any mac experience at all, so it has fallen on me to get them all officially on the domain now. I'm usi
-
Clear the Parameters on a Page
Hi, Does anyone out there know who to clear the parameters on a page? I have users that input values into feilds on a page and when they press submit the results return. Now I want the users to be able to press another button to clear their inputs. T
-
More information regarding HTTP Submit button
Hello All , I am trying to learn the fucntionalities of a HTTP Submit button . I have designed a simple form which contains only one text field which will be used to enter the UserID .After entering the User ID the user has to click on the submit bu
-
Would anyone care to explain to me the difference between these 2 forms of compression. I always use 8 bit, never had issues but just want to know the difference. thanks.