I have a OBS,iMac G5 (17-inch) that won't start. What is possibly wrong?

My computer won't start.

If it does not power on at all, the cause may be as simple as a corrupted parameter in your iMac's System Management Unit (SMU).
Try resetting it according to the following instructions:
iMac G5: How to Reset the SMU
If that does not prove successful, carefully read and follow these instructions, which include the above procedure:
iMac G5: Troubleshooting when your computer won't turn on
Good luck, I hope you can get it working again!

Similar Messages

  • Imac making clicking noise that won't start

    I have a 06 imac that will not start. When I turn it on it makes a clicking noise then the screen will turn white and a file with a question mark appears.  Any ideas of what is wrong?

    Your hard drive has broken. I really hope you have some backups done by Time machine or something else.
    You can try to get the hard drive back to working oder by inserting your osx install disc and restart computer by pressing alt key at the same time.. Then choose intall disc and from there choose disc utility and fix macintosh hd permissions.
    But im pretty sure that your hard drive is dead. You can find instructions to change the drive by yourself but you need few tools and steady hands for that.

  • Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

    Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
    Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

    Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
    The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
    As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

  • I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    As you have discovered... you cannot use the install discs from another Mac...
    Re the iMac running OS X 10 5 8... and for your New Mac...
    See Here for keeping your Mac Happy...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    http://www.thexlab.com/faqs/performance.html

  • Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Hello,
    You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
    http://support.apple.com/kb/HT1661
    Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
    We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

  • HT5312 I have a used iMac 21.5 in that i would like to reset the apple id so when I get updates in goes to my id instead of the previous owners id. Which in the case is a relative

    I have a used iMac 21.5 in that i would like to reset the apple id so when I get updates in goes to my id instead of the previous owners id. Which in the case is a relative. How can I do this ?

    The Mac, it's OS and the iLife apps are still associated with the original owners Apple ID.Normally the original owner needs to follow the process to prepare a Mac for selling or giving it to someone else. They need to call Apple Care and request that their Apple ID be disassociated from the Mac, erase the Mac and install the most recent version of OS X that shipped on the Mac, reinstall the iLife apps and deauthorize the Mac from their iTunes account.
    If you have a bill of sale of some sort and can prove the Mac beongs to you, Apple may be able to assist you. Call Apple Care and explain the issue.

  • My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?

    My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?

    put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414
    You'll probably lose all your data

  • I am unable to sync all my selected songs to my iphone.  The error message is that the computer is not authorized.  However, I have authorized the computer and iTunes confirms that.  Any ideas what can be done to fix this.  My phone is an iPhone 4S.

    I am unable to sync all my selected songs to my iphone.  The error message is that the computer is not authorized.  However, I have authorized the computer and iTunes confirms that.  Any ideas what can be done to fix this.  My phone is an iPhone 4S.

    Were some of the songs purchased from a different itunes account?

  • I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

    I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
    I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
    I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
    Thanks for any help!
    Gina

    What your describing could be a logic board or memory issue. 
    You did or did not hear 3 startup chimes?  If you hear 3 chimes when you start it, that would indicate a memory problem.  Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
    You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

  • I have 1000  photos in an iPhoto Library that won't import into Photos because it says the metadata can't be read.  Yet those JPG files open just fine in iPhoto, GraphicConverter, et al.  What gives?

    I have 1000  photos in an iPhoto Library that won't import into Photos because it says the metadata can't be read.  Yet those JPG files open just fine in iPhoto, GraphicConverter, et al.  Any thoughts?

    It’s part of the basic install of OS X. So unless you deleted it then it’s there in your apps folder. If you have deleted it, it’s on the System Restore disks that came with your Mac. You will be able to extract the installation package using Pacifist.
    Alternatively, if you’re using almost any camera +apart from a Canon+ then the camera card is visible on the desktop and you can drag the movie to the desktop using the Finder and import from there.
    No matter what camera you use, if you pop the card from it into a USB Card Reader then it will be accessible via the Finder. Card Readers are inexpensive and all round a better idea.
    Why use a Card Reader?
    Because it’s safer: Less risk of your images being lost if your camera shuts down during transfer.
    Because it saves the battery on your camera
    Because it saves wear and tear on your camera ports
    Because it’s almost always faster.
    Regards
    TD

  • HT5654 When I go to my shortcut on my desktop to open itunes I get Itunes.exe unable to locate component. I have tried removing it and re-install it. Any ideas what might be wrong?

    When I go to my shortcut on my desktop to open itunes I get Itunes.exe unable to locate component. I have tried removing it and re-install it. Any ideas what might be wrong?

    If in the message window it says that "...MSVCR80.dll was not found", go to this guys webpage: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm.  I followed his instructions exactly and problem solved.

  • I reinstalled tiger on one iMac, but want to re-upgragde it to Lion.  I don't have the discs anymore, but I installed Lion from the Mac App Store.  Now that I'm back to 10.4, I don't have the App Store.  I have a new iMac with Mavericks, but it won't let

    I have a 2006 iMac that I've upgraded to each new os as they came out.  I just wiped it (for the kids to use, I have a new iMac with Mavericks) and reintalled Tiger from the original discs.  I want to get it back to Lion - which I purchased from the Mac App Store.  But Tiger doesn't have the App Store and I don't have the discs anymore from the intermediate versions.  I tried downloading Lion from the new iMac but it's not available...
    Any ideas?

    To get to the App Store, you need to upgrade the Tiger machine to Snow Leopard.

  • I have a g5 iMac with a part AP ID 001124936B6. What is it?

    Can anyone tell me what this part is?

    You are probably right. See this illustrated guide for accessing the Airport card in a G5 iMac:
    http://www.ifixit.com/Guide/Installing+iMac+G5+17-Inch+Model+A1058+AirPort+Extre me/966/1

  • How do you eject a CD stuck in the drive from an imac that won't start?

    My Imac won't start. Its stuck on the Apple screen with the little gear going around. Other discussion have suggesting trying to boot directly from the install disc, which I want to try but can't because when it crashed there was a DVD in the optical drive and I now cannot remove it.
    Any suggestion on how to remove it as a first step to fixing the start up screen issue!

    Here is a collection of ways to eject a stuck CD/DVD from your Mac.
    How to Eject CDs or DVDs From Your Mac Even When They Are Stuck
    Tom
    http://macs.about.com

  • Have a 2 year old macbook pro that won't turn on--logic board?

    We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?

    When you attach the power adapter, does the led light up?  If so, what color?
    What happens if you press the external battery check button?
    Have you tried a SMC reset?
    http://support.apple.com/kb/ht3964
    Have you had it evaluated at an Apple store genius bar or an AASP?
    Ciao.

Maybe you are looking for

  • IPad 2 - email shuts down when trying to delete messages

    Whenever I try to delete email messages, I click on "Edit", check the messages to be deleted. The red Delete button shows up and as soon as I touch it the entire email program shuts down and returns to the home page. The next "Delete Message" button

  • Using GFI Faxmaker NetPrintQueue2Fax-printer doesn´t work with CR  XI

    A customer of us needs help urgently! Using NetPrintQueue2Fax with CR 8 generated reports worked fine, but after upgrade software to CR XI, no changes made in existing reports, we are not able to send faxes using NetPrintQueue2Fax-printer. The faxnum

  • Downloading Hardware & Software After Installing Microsoft 7

    Hello! A virus attacked my OS, so I wiped the old one (Microsoft 7 Home Premium) and installed Microsoft 7 Ultimate (64-Bit). After this, I had no drivers, hardware, software, nothing for the wireless connection, it's all gone. If possible I'd like t

  • Communication between app world and 9900

    I just got a 9900, when I try to connect to App World I get the message: "An error has occurred communicating with the BlackBerry World Web plug-in. Please restart your device and try again. If you have content protection enabled on your device, plea

  • Refresh problems on Mac OS

    I have a JPanel that contains several JLabels. I've attached a mouse listener and overridden the paint method for this panel to create a drag rectangle that is drawn based on the position of the mouse. When this application runs on my windows machine