I have a officejet j4680 All-In-One printer. I cannot get the black ink cartridge to stay in place

The black ink cartridge will not stay in place it keeps popping out when I place the color ink cartridge first. When I take the color cartridge out and put the black ink cartridge in it stays.
Is there a trick to replacing the black ink cartridge?

Make sure it is a genuine HP cartridge.  Take it out and clean the contact on the cartridge and in the printer.  Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

    Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
    Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
    Error messages: None
    Recent hardware or software changes made to the system: None
    Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series).  I don’t know how this all came about or why?
    I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
    Connection Method: Wireless
    Diagnostic Summary
    Troubleshooting performed: Yes
    First Wireless Network Report:
    Everything: Passed
    Signal Strength: Excellent
    Other networks detected matching your network name (SSID): No
    Configuration Summary
    Network Name: Correct
    IP Address: Correct
    Config Source: DHCP
    Communication Mode: Infrastructure
    Authentication Type: WPA-PSK
    Encryption: Automatic (AES or TKIP)
    Second Wireless Network Report:
    Network Name: Was different
    Of course that disrupted the whole report.

    BH
    Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted  and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
    LH

  • I have a officejet j4580 all in one printer

    I have  a problem with my printer. keeps telling me i have a paper jam i have looked the printer over and over and i cant see any paper in it. i have ininstalled and reinstalled didnt help. i put paper in it and press the ok button the paper comes out crinkled.

    can you put both the cartridges in and try
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Wireless Problems between laptop with OS Windows 7 64 bit and HP Officejet j4680 all in one

    Hi I am having problems connecting wirelessly to a HP Officejet j4680 all in one printer, even though it has been connected wirelessly before, and also works fine with the cable in.
    OS - Windows 7 64-bit
    Error - driver errors, saying the printer is not compatible with windows 7 64 bit (however it has worked previously)
    Changes to system - cannot remmeber making any changes to OS
    Cheers

    Uninstall the HP software using the uninistaller in the HP folder.
    Restart your PC.
    Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found.  How can I get connected?

    I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro.  When I try to print and email I get NO AIR PRINTER message,  How can I connect my printer to my IPad and print emails.

    Welcome to Apple Support Communities.
    If you're using the Printer Pro app, you're not going to use AirPrint services.
    They are not the same thing.
    Are you using the 'Open In' option to get the email into Printer Pro for printing?
    http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
    Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
    Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

  • HP officejet j4680 all-in-one paper jam issue

    I bought HP officejet j4680 all-in-one two months ago from a dealer. Now it keeps telling me a "paper jam" which doesn't exist. I tried everything from the troubleshooting in HP website. The jam light just keeps blinking. Now I am so frustrated with this product.

    @CAGY, take a look at this HP link on how to clear a jam.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • I have a officejet j4580 all-in-one and i have lost the cd how can i set up my laptop?

    i have a officejet j4580 all-in-one and i have lost the cd how can i set up my laptop?
    This question was solved.
    View Solution.

    Hi justine28,
    Click on the link below to download the software and drivers for your printer.
    HP Officejet J4580 All-in-One Printer Drivers - Select your operating system
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints o

    I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints one top line (ex: Page 1 of 1) and it only prints the footer. It does the same with my HP Deskjet F4100 series printer.

    Call and/or check HP Support website for updated drivers.  You can also check KB Articles:  http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    and http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
    What to do when you can't print

  • HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

    After operating a HP Officejet 4500 All-in-One Printer - G510g  from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
    The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
    The www.hp.com site offers a download of a full driver for the  printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
    There are no options to uninstall, either in control panel/printers or in control panel/software.
    Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
    I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
    I have also tried the HP Printer Installation Wizard. The result is similar.
    Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
    Thank you
    This question was solved.
    View Solution.

    Hello @monc , welcome to the HP forums!
    I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
    I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software  
    Restart the PC afterwards
    Perform a Clean Boot
    Restart the PC again
    Download and install the printer again:  HP Officejet Full Feature Software and Driver
    If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 4630 all-in-one printer Cancels Print in Middle of Job

    Hi,
    I recently bought an HP Officejet 4630 all-in-one printer, and it automatically cancels jobs in the middle of printing. The computer I am using is an HP Envy dv7 with 64-bit Windows 8, and I am printing over a wireless network connection. My computer receives an error that HP Officejet 4630 series couldn't complete print and the printer simply says canceling. I have tried all the steps in the troubleshooting sections, both for printing issues and network connections. I've uninstalled and reinstalled the software multiple times, I've established a manual IP, and everything else, but nothing seems to work. It also seems to have the issue when using HP ePrint. It happens in all sorts of programs and formats such as word, pdf, and html. Unfortunately, I did not receive a USB cord, so I can't see if that will fix the problem at all. Hopefully somebody can help me with this, otherwise it's obvious that there's a problem with the actual printer I got and I'm going to have to get something else.
    Thanks
    This question was solved.
    View Solution.

    This is how I fixed it:
    Find out what the IP address is that your printer is using. 
    Then go to control panel and click on "View Devices and Printers".
    Look for your printer an right click.
    Click "Printer Properties" and a new screen will open.
    Along the top you will see some tabs. Click the one that says "Ports"
    Click "Add Port"
    Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen will open.
    Click "Next"
    Type in the IP Address of your printer and click "Next"
    Your computer should find your printer.
    Click "Apply" and your printer should work correctly.

  • HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

    I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie  ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ?  Loooking for any answers ! Thank Yopu ,JS

    Hi jspin3,
    I'd like to help.  For now, I would hold off on the uninstall and reinstall.  Can you answer some questions?
    Is the printer connected by USB, Ethernet or wireless?
    Do you get any error messages?
    Does a blank page come out or do no pages come out when you try to print from the computer?
    If you put a document face down on the scanner glass, are you able to make a photocopy?
    Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge?  Click Here 
    If you print a  Self Test Report,  do all of the colors print?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • How do I print from my Samsung Galaxy Tab 4 to my HP Officejet J468 All-in-One printer?

    I just got a Samsung Galaxy 4 Tablet and I'm trying to figure out how to print to my HP OfficeJet J4680 All-in-One. Is there an app that I need to download?

    Hi,
    Unfortunately your printer spec indicates that the printer is not wireless compatabile so you won't be able to use any mobile apps with this printer.
    I've included the list of web connected printers here.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HP OfficeJet 6500A all in one Printer . No European size envelopes apart from C6 on the printer.

    We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7.
    It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising a DL or C5 which are the other two popular sizes of envelopes. We cannot customize from either computer. We have tried altering the specifications of other envelopes listed for the printer but to no avail. Has anyone got a solution to this problem or are we going to have to wait for HP to upgrade the printer programme. Word Perfect Office X4 is the word procesing programme in use plus a basic Microsft  Word that is OEM.

    Hi jspin3,
    I'd like to help.  For now, I would hold off on the uninstall and reinstall.  Can you answer some questions?
    Is the printer connected by USB, Ethernet or wireless?
    Do you get any error messages?
    Does a blank page come out or do no pages come out when you try to print from the computer?
    If you put a document face down on the scanner glass, are you able to make a photocopy?
    Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge?  Click Here 
    If you print a  Self Test Report,  do all of the colors print?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all,
    My Officejet 7310xi All in One Printer no longer connects wirelessly.
    The printer does no show up while searching for it wirelessly where it had previously.
    In the past it would say that the printer (HP Series 7300) was offline.  I would remove the device through the control panel and search again.  A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device.  I would default to the new printer icon, Copy 1, and it would work.  This happened over the course of a year without any problems.
    Now nothing is working.  The printer can't be found by my network.  I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
    Although the printer has a built in  network set up option, it has no installation wizard.  I can't find a way to activate the wireless feature/icon.  There is no I.P. address either.
    I feel like a monkey pulling levers for a banana!  I appreciate your help.

    Hey @Kathlanta ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
    By the end of this I want you feeling more like this;
    Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
    Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
    Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
    Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
    You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
    Look forward to hearing back from you! Have a good one!
    I worked for HP.

  • HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

    HP OfficeJet 6310 All-In-One printer  on a iMAC  OSX version 10.9.5 system
    Hello,
    As I don't print in color much but had need to I discovered my printer not printing in color.  I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled).  The printer still won't print color but it advances the paper as if it was printing - just no ink on paper.  I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities.    The test page print does not show color either.   I have no error messages.  Don't know what else to do.
    thanks
    DH

    Hi there @dhengr!
    Thanks for contacting the HP Forums!
    I can see your having a print quality issue with your HP OfficeJet 6310.  I should be able to provide documentation that will help locate a resolution.  You mentioned you have already tried another  HP95 tri-color cartridge with no resolution.  I also noticed you said that the quality report from the printer also has no color ink.  
    If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer.  I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer.  If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone.  They deal with hardware warranty and replacement options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Have a great weekend and thank you again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Maybe you are looking for

  • An error occured during the executin of the DETERMINE_ENGINE_RELEASE  i

    Hi,          while installing EHP1 on java(Netweaver 2004s) using EHPInstalled we are stopped with this error in configuration stage An error occured during the executin of the DETERMINE_ENGINE_RELEASE phase could not detect as java release return co

  • IMAP settings not saved

    Hello all I have this weird problem with one of my IMAP accounts. The settings should be set to use SSL on port 995, password authentification, allowing "unsecure" authentification (sorry I have a french system, so I'm not sure of the english transla

  • Forms debug not working in 11g. Working fine in 10g

    I am able to attach the debug of runtime with the random port number, but not stopping at the breakpoints. This is happening in 11g environment. Same method is working in 10g environment. What additional configuration do I need to do to run a form in

  • Rotate camera function

    Hello, I'm starting to write a code for Acrobat and 3d Objects. What I need is a function that rotates an object given a yaw and a pitch (i.e. rotateObjectYaw(45) to rotate the object 45 degrees around, rotating the camera, not the object itself). I

  • APP Check issue..

    Dear All,   In  FBZP configuration, i have given form :F110_PRENUM_CHECK, after running the payment run, check is not getting displayed in Spool request, where i missed something...Pls let me know.... Regards, Suresh Patipati.