I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

Why should I have to spend money to solve this problem? Many others have the same concern, Airport Utility 6 does not support  older Airport Express units. This is Apple's problem. I've tried many solutions proposed on the net but none worked. I'm still trying for a work around.

Similar Messages

  • HT204053 when trying to sync my iPhone i get a message saying : iTunes can't sync apps to iPhone because the apps installed on the phone could not be determine. what is going on?

    when trying to sync my iPhone i get a message saying : iTunes can't sync apps to iPhone because the apps installed on the phone could not be determine. what is going on?

    I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps.  I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps.  I updated the apps via iTunes and then synced again without an issue.
    iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

  • When i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss

    when i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
    See also here: http://www.apple.com/support/ipad/wifi/

  • TS1424 i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

    i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

    Hi marymike,
    The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
    Please try the suggested steps mentioned and check.
    Regards,
    Rave

  • When I try to connect my iPod 4th gen to my computer I get a message stating that it may be corrupted and asks if I wish to format the disc. However, I have hundreds of songs and photos that I don't want to lose. What can I do?

    When I try to connect my iPod Nano 4th gen to my laptop I get a message that my device may be corrupted and asks do I want to format the disc.  However, I have hundreds of songs and photos that I don't want to lose. What can I do?

    This can sometimes be the result of a faulty/damaaged USB sync cable.  Do you have another cable you could test it out with?
    B-rock

  • When I try to send a link to a page from Safari, I get a message saying that sending the message to the server failed.  It places a copy in the outbox.  All other email and safari functions work properly.  Ipad 2 IOS 7.1

    My Ipad2 works fine except when I try to email myself a link to a safari webpage.  I get an error message saying that the message failed to connect to the server.  It says that a copy of the message has been left in the outbox.  I cannot get the message from the outbox.  All other email and safari functions work as expected.
    I have cleared data and cookies, powered down, and done a reset.  Nothing seems to help.

    Typing in additional text seems to get the job done.  This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
    I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest.  Adding the extra text seems like a pointless step, but it does work.
    Thanks.

  • When I try to play purchased videos on my ipad from iTunes, I get a message saying I do not have permission to access the requested resource...

    When I try to play a video on my iPad that I purchased from iTunes, I keep getting a message saying I do not have permission to access the requested resource...why?

    I experinced this when I tried to watch a YouTube video. What I did was restart the iPad and it should work. If it does not work, try doing hard reset, by holding the home and wake/sleep button, ignore the red slider, until the apple logo appears.

  • I have an iPod 5th generation and it is my second iPod but when I try to buy a song it says I need to answer security questions but they are ones I don't recognize or know the awnser to!! Help!!

    My second iPod is a 5th generation and when I try to buy something it says it needs make sure I am who I say I am and it makes me answer security questions. But the problem is I don't know the answers to them. I did not choose them. And if I can't find an answer I can't buy anything!!! Help!!!!

    You need to log in to your Apple ID and change you security questions.  Take a look at this link, http://www.apple.com/support/appleid/

  • All of a sudden when i try to attach an iphoto to an email or facebook i get a message that say i need  i photo 5 or later and my pictures are not available

    First I have Mac OSX 10.6.8
    I photo 8.1.2
    All of a sudden when I attempt to download a photo from Iphoto to an email attachment or to facebook, I get a message that says I need to :
    "open Iphoto 5 or later to see photos from your Iphoto library in this list" it shows in light grey.
    AS I mentioned above, I have 8.1.2 and my photos are all available when I go to the photo app.
    I read to delete iphoto from the library which i did but that didn't help and maybe was a mistake? And if it was how do I fix that?
    I have searched the web to no resolve. I also see that I do not have the latest version of iphoto but when I check for updates it says there are none available.
    What happened and how can I fix it! HELP!
    I'm not very computer savvy so I appreciate simple instructions.
    Thank you!

    1. Try reinstall iLIfe 09 from your install disk
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    If that fails, then you're reinstalling the OS.

  • HT1918 When I try to update my email (apple ID) to our current provider an error message says I can't use that one as it's my "rescue" email. help

    I need to change my email to reflect my current provider, however when I try an error message comes up. It says I have to choose a different email as the one I'm trying to update to is my "rescue email." How do I fix this?

    Did you change the ID in Settings>iTunes & App Stores>Apple ID? Tap the old ID and sign out and then sign in with the new one. If not running iOS 6 it will be Settings>Stores>Apple ID.

  • When I try to play netfix on my new mini/ old monitor I get a message to ensure my monitor is HDCP compatible... Is this because I am using an old monitor?  Do I need to buy a new one?

    When I try to play Netflix on y new Mac Mini and old monitor, I get a message asking me to make sure my monitor is HDCP compliant.  Is this because I am using an old monitor?  Do I need a new one?

    All kinds of bugs are being reported with Safari, from sluggish performance to it refusing to load up at all. Some users are seeing an HDCP compliant error message appear when watching Netflix, and possible solutions include switching to Silverlight rather than HTML5 or unplugging display peripherals. Alternatively, you could switch to another browser until either Apple or Netflix get around to fixing the bug.
    from
    http://fieldguide.gizmodo.com/the-worst-bugs-in-os-x-yosemite-and-how-to-fix-the m-1652690924

  • When I try to open iTunes,it tries to start but than I get a message stating-iTunes has stopped working , close the program. Does anyone have a problem like this? I'm using windows 7 compatibility turned off.

    I'm using a Dell PC with windows 7. Apple Store cannot open completely. An error message states- iTunes has stopped working, close the program.
    I have spoken to at least 3 Techs with no solutions found for this problem. Compatibility mode turned off. Newest Download from Apple site.

    See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • When I try to sync photo with itunes on my iphone 5, photos get saved in two different albums Photo gallery and one folder by the name of folder which I have sync...Why is that? Itunes version 11.0

    Please Reply

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • HT5022 i have Mac Os 10.8.2, when intall the airport utility, it still says "airport port utility cannot be installed on this disk. the version of Mac OS on this disk is not supported?

    Hi, I am new comer of Apple products.
    I have a Imac (OS 10.8.2) and just bought a Time Capsule (2T).  I have trouble to install it.
    anyone here could help me?
    I have downloaded the untility 5.6, during the installation, the message "the version of Mac OS X on this disk is not supported".
    what I should do next.
    thanks

    You have Airport 6 right in the Utilities folder already.
    5.6 will not install in ML after the upgrade to ML.

  • Lost connection to one of my Airport express units. Serial number 44500WQV0. Message in Airport Utility is to use Version 5.6 to configure base station. I have version 6.3.1. Both airport express units bought at same time few years ago.

    Hello all.
    Lost my connection to one of two airport express units. Both purchased few years ago. Use them to stream music to house speakers via WiFi. I have v6.3.1 of Airport Utility. Message says to use v5.6 to reconfigure this base station.
    How do I do that, please?
    Mahesh

    You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
    Be sure to read the caveats at the end.
    Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
    Download Pacifist here: http://www.charlessoft.com/
    Download unpkg here: http://www.timdoug.com/unpkg/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
    Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
    Open Pacifist and from its File menu, navigate to the package and open it.
    Click the "reveal triangles" until you see AirPort Utility 5.6.app:
    Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
    The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
    If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
    Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

Maybe you are looking for

  • Error in new version map viewer

    Dear Sir, i am trying to install new version 11 mapviewer and its giving following error please can any one help me in this issue E:\Mapviewer11\MapVQuickstart\mv10131rc1_qs\oc4j\j2ee\home>java -jar oc4j.jar 2006-09-24 22:35:20.540 NOTIFICATION JMSSe

  • BPM Container for an abstract interface

    Hello all, I have created few abstract interfaces. But when I create a BPM container of type abstract interface and click on input help, abstract interfaces are not displayed. What might be the problem ? Shankar.

  • Search for all user messages doesnot work now ?

    Hello SDNer's, I often search my own questions and posts entering the keywords in Search for all user messages. After our forum has been revamped this functionality seems not be working as it used to. When I enter the keywords and Enter it throws me

  • Error when import spreedsheet

    I get unexpected error occured -2147467259 That's happen also if the file is very simple with text columns keren tsur

  • No receiver determination found in spite of correct url

    Hi everybody, our partner tries to reach our XI on https adapter to start a synchronous process. The url is as follows: <u>https://[host]:[port]/sap/xi/adapter_plain?party=[PARTY]&service=[SERVICE]&interface=[INTERFACE]&namespace=[NAMESPACE]</u> I ca