I have a Panasonic with out HDMI . I need to conect apple TV
My panasonic tv I do not have HDMI . I need to conect apple tv. I need the specific adapter from HDMI into composite out. need help. please
Thank you
under Applications>Utilities on the Macbook load up AudioMIDI Setup
What does it say for 'Properties for Built-in Output' ?
I connected a Mac Mini to my TV and the audio was intermittent - i found the setting was changing from outputting optical to analogue and back all the tiem.
The output should auto-select but I think something about the cable plug I used was causing the issue - when I plug in headphones audio is fine. I get the impression the socket may be a bit fussy about the 3.5mm plug - in theory they should be all the same but theer may be slight differences in shape/size of both sockets and plugs.
Similar Messages
-
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
I have a PDF with a diagram, I need to translate the text so I open it in Illustrator. The document opens up vertically oriented I try to put it horizontal to be able to read and change the text However everything I have done is not working The artboard does change, but the diagram stays vertical.....Please help I need to finish that for today..Please help
A PDF usually consists of one to an indefinite number of clipping masks inside each other.
You need to be very carefull with selecting stuff.
So you need to read the manual on how to select stuff and on the basics of Illustrator.
On top of that: because of the complex hierarchy of PDF files, it is kind of difficult to help you without seeing anything. -
I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?
To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar -
I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?
Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao. -
How do I reset my security questions with out having to select a new apple id or a new password?
How do I reset my secrit questions with out having to select a new apple id or a new password when I'm at the itunes store.
You will be able to reset them via:
appleid.apple.com
If you do not know your password contact Apple's expresslane:
expresslane.apple.com -
Anyone have a problem with the HDMI port suddenly not recognizing any digital source imput signal?
I have an HP 2711x monitor.
Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
Thanks.Hello Largelee,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
'Input out of Range' Error After a Recovery or Upgrading to Windows 7
Monitor is Blank
Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
In MTO scenario i want to have some materials with out account assignment
Hi,
In MTO scenario i want to have some components in my BOM to not to get planned with respect to sales order stock / account assignment of specifice sales order( say "C" class items). if i use Consumption based planning" VB" for those
materials it works with manual reorder point planning.but i cannot estimate my correct reorder point for that material.because it is not constant requirement .It varies basing on customer sales order for that period.
My question is how to plan these components in MTO scenario with out having idea of correct manual reorder point for those materials.
thanks in advance
regards
madanMadan,
Automatic Reorder Point Planning
In automatic reorder point planning, both the reorder level and the safety stock level are determined by the integrated forecasting program.
The system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified by the MRP controller, and the material's replenishment lead time into account, and transfers them to the material master.
Since the forecast is carried out at regular intervals, the reorder level and the safety stock level are continually adapted to the current consumption and delivery situation. This means that a contribution is made towards keeping stock levels low.
So you need to maintain the forecast view for the material. The forecast values comes from consumption data. If the system in place for some time then consuption data will be automatically by the system based on the material issues. I am not sure if you can enter the consumption manually.
Regards
Ram -
Touch screen on Iphone slowly, over a few days stopped responding. Went to Genius Bar and was given a new 3GS because they didn't know how to fix the issue. Cool. Went home synced with Macbook Pro (new-12/2010), two days later same issue. This time when I went to Genius Bar they restored the phone to factory settings and instructed me to load as a new phone in Itunes instead of restoring information of the previous phone, which is an option good for when your replacing phone not fixing one Anywho, did everything they told me to do. SAME ISSUE A FEW DAYS LATER. This time I was told the software issue is with my Macbook and I thought this made sense, so I took it in along with the phone. That was yesterday. Phone working intermittently since leaving Apple. I was given instructions that if their "daily" fix didn't work to erase hard-drive and reinstall software that came with the macbook and start fresh. This would definately fix the issue. Extreme yes, but I need use of my phone, especially since we got rid of the house phone and all use cell phones. So last night I did the required erase of hard-drive and re-loaded all software that came with it and Microsoft Office for Mac. Plugged in the phone to set up in itunes and thought that was it. My phone is still not working. Can't answer when I try, can't make calls, etc. What the heck do I do? I'm starting to feel like a major lamo having to keep going back to Genius Bar, but I know enough to know these issues should have been resolved with the steps I've taken. I even went as far as to restore through my husbands computer and same thing. Could there be a problem with Itunes? Could the magnetic stripe in my debit card be hurting the device somehow, although that's a long shot since I have had the same or similar case since getting the phone. Frustrated beyond belief. Apple support not open at this hour so I'm trying my luck here.....
Thanks for any input.restore iPhone as new and start again
-
I have two iphones with different phone numbers that I use. I have one of them set up on icloud now, but do not know how to set up my second device on icloud. Both of my iphones use my same Apple ID for purchases, etc. Is there a simple way to add a device to my icloud account? Thank you in advance for any help someone may be able to give me.
To move one of the phones to a different iCloud account (if that's what you want to do), go to Settings>iCloud and turn all synced data to Off. When prompted, choose to keep the data on your iPhone. After everything is off, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud so the other phone will not be effected. Then set up a new iCloud account with a different Apple ID and turn iCloud syncing in Settings>iCloud back to On. When prompted, choose Merge. This will upload the data to the new iCloud account.
You will then have to go to icloud.com and sign into each iCloud account separately and delete any unwanted data that you don't want on the phone syncing with each account. -
I have a problem with the sattalite signals , need...
hello everybody ,
I have a problem with my nokia N95 8g pertaining the sattelite signal for the GPS as there is no sattelite singal at all , it used to be OK before but suddenly there is no singals , I have formatted the mobile but there was no benifit .
Could u pls. help me as I am really deseprate cause I used to use the maps frequently before this problem , and I tried all the ways but no benifit .
Thanks n Rgrds.
THEWOLF777Delete the ipod updater-redownload it from Apple.
The file you downloaded became corrupted and will not work. -
In infotype 2004 (availabulity) subtype 03 (callout with out stand by) need calculate scheema
Hi,
In my client have subtype 03 in 2004 availability so this amount will calculate through payroll schema so what i will do for solution
please help me out
Thank youYes, I already set the subtype text table to be T591S. I am wondering if there is anything specific to infotype 48 because the SAP-delivered function module HR_PERSON_CHECK_SPT is expecting an international employee to have 2 infotype 48 subtypes valid at the same time, but even if I give infotype 48 a time constraint class 3, I still can't save a subtype US02 record at the same time as a subtype US01 record.
Here's a sample scenario:
Sumir has a J-1 visa (as an exchange visitor) valid from 1-Apr-2006 to 31-Mar-2009. He arrived in the U.S. on 6-April-2006 and stayed until 31-Mar-2009. In infotype 48, we need to record the Visa validity period using subtype US01. We then need to create a second infotype 48 record (subtype US02) for the time that Sumir was actually in the country. The function module above is then used to determine that starting 1-July-2008, Sumir should begin to be taxed as a resident alien, so he is no longer eligible for the Medicare exemption.
Right now we are unable to create the US02 record because it overlaps with the US01 record. I have tried changing the Time Constraint Class at the infotype level (T582A) to be 3 to just make it wide open, but I still get the collision error. This would not have been ideal anyhow, since it would also allow overlapping US02 records, which should not be possible. (An employee can only be physically in the country at most once at a time, although sometimes I wish I could be two places at once!)
Is there any Activation that needs to be done once a change to T582A, T591A, or T777D is made? I would think that at most you would need to back out of PA30 and come back in after the configuration change has been made.
Thanks for your help!
- Steve -
Apps not being updated probably due to error of same id login in 2 devices . please help.
Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 5
According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm. -
How do I find out if FileVault is enabled ?
To answer your subject line, see About the Flashback malware. (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)
I'm not sure what that has to do with FileVault, but to answer that question, go to System Preferences -> Security & Privacy -> FileVault. -
Have only 1 HDMI. Need 2 for Apple TV & Direct TV- Splitter? Switch?
I have a TV that only has one HDMI. It is currently being used by my Direct TV. I would like to hook up Apple TV but don't have another HDMI on this TV. Is there an adapter such as (splitter,switch) or something..etc. that I can purchase so I can use both? -Thanks!
Welcome to the Apple Community Ms Brandy.
yes you should look for an HDMI switch. There are both splitters and switches, they do different things, you want a switch.
Maybe you are looking for
-
HT4847 is there a unified way to manage iCloud storage for multiple devices
i have multiple idevices and the same account being used across multiple of these devices. I want to manage my storage from a central place. is this possible.
-
Can you choose to block phone calls but not texts from a number?
So I have searched all over the place and have not found an answer. I am sure someone has blocked me from calling them because when I try to call them I recieve this message: "Welcome to Verizon Wireless. The number you were trying to reach has call
-
QT on win7 wont play .ts file but QT on iMac does!
Hi. I have a .ts file which will not play correctly (video ok, audio jumpy) using VLC (both win and mac). QT 7.72 player on windows gives error 2048 unrecognised file. But QT 10.0(131) on my iMac plays it just fine! How can I get quicktime on windows
-
New ipod 60 GB UPGRADED now itunes wont open unknown err [-48]
uninstalled everything installed everything started re started. the old version worked 4 ipod mini but have no clue why it wont start SOMEONE HELP SPENT ALL THIS BREAD ON THIS THING NOW IT WONT WORK.
-
HT204409 I updated and now I cant connect to wifi, how can I remove the update
I updated and now I cant connect to wifi, how can I remove the update.My other stuff works, Iphone wifes Ipad etc