I have a password protected site in iweb, but how do I get my users to "sign out" so there not always logged in

I built a password protected site in iweb and its published through mobileme. How do I get users to "sign out" so there not always logged in

I wouldn't bother really - it would be best to concentrate your efforts now on finding another web host that you can move your site to because after the end of June this year, publishing to MobileMe won't be an option.
Have a look at GoDaddy, HostExcellence etc. and you can still password protect your website, but you just do this through your host/server rather than MMe.
Start looking now before it's too late!

Similar Messages

HT201263 my ipod is disabled, it says to connect to itunes. When i connect it to itunes it says, 'i have to have a password to connect to itunes but how do i get to connect to itunes wwhen the ipod is disabled?

my ipod is disabled ,it says to connect to itunes when i connect to itunes it says i have to have a password to connect to itunes. So how do i connect the ipos to itunes when it is disabled and wont let me type in a password?

If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
batmanlovesyou wrote:
that dont work

HT1296 I am new at this I have music on my iTunes on pc but how do I get it to stay in my music on iPad ?

I am new at this I have music on my iTunes on pc but how do I get it to stay in my music on iPad ?

Sync with iTunes. All content in iTunes can be synced to the iPad this way - select the various tabs in iTunes and select the content within each tab that you want to sync.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums or playlists that you want to sync - or the entire library if you like.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
iOS: Syncing with iTunes.
http://support.apple.com/kb/HT1386
This might help as well.
http://www.apple.com/support/ipad/syncing/
And this as well.
http://manuals.info.apple.com/en/ipad_user_guide.pdf

My iPhone 4s deleted all of my contacts today. I have them all backed up onto iCloud but how do I get them back onto my phone?

I went onto my phone to send a message and none of my contacts are there. I checked iCloud and they are backed up but how do I get my contacts from iCloud back onto my phone?

Hi
I just figured out how to restore contacts from icloud....
Try this if you already have the contacts tab turned on in iclouds on ur phone settings:
Go to icloud.com - contacts
bottom left hand corner is the gear icon which is settings - then select all
This selects all your contacts then go to export as tv card or something like that
A window pops up asking u to save - save onto ur computer where u can access easily
go to ur email, compose new email & attach the saved contact list that u just saved onto ur computer
on ur phone open mail, then open ur email with the attached contacts
open the attached contacts - at the top it will say ' add all contacts' select that
then it will pop up 'create as new contacts' or 'merge contacts'
i selected create as new contacts as iphone 4 deleted all my contacts from my phone
after a while it downloaded all my contacts back onto my phone which I double checked by entering the contacts app from my iphone
so happy i got all my contacts back yay! i had over 400!!!

I have lost PassWord to join to my "Net"; How can I get Connection ?

I have been using TATA PHOTON+ dongle to get "Net" through the ROUTER "HAME" ( MPR-A1 3G ROUTER) for the last 12 months .
Recently while using the iPad2, I clicked on some " UPDATE " and then I have lost the Internet connection . On several trials now I am
stuck up at a step which is asking PASSWORD to JOIN the Network. I am not at all recollecting the required PASSWORD .
Now how can I find out the original PW ? OR in its absence, how can I get connected to the Internet , and if
necessary, how can I create a NEW PASSWORD ?
WILL SOMEBODY KINDLY HELP ME SOON ? MANY THANKS IN ADVANCE !
Sincerely, Dr. R.V.JOSHI. INDIA .

Hello,
Is your Pc connected to the same Wifi Network ?

I need to update my firefox browsed to FF4, I have downloaded it on to my netbook but how do I get it to upgrade to FF4?

I have a aspireone netbook with FF2 on it. Recently I haven't been able to comment on things on sites so I downloaded FF4 but I don't know how to install it onto my netbook. HELP!!

Generally speaking, when you install a new release of Firefox, the installer detects your existing settings and uses those to set up the new version. When you upgrade infrequently (this would be about a year's worth of releases), there might occasionally be glitches in the process. Therefore, I suggest making a backup of your Firefox profile folder (your personal settings folder) first. This article has suggestions on backing up: [[Back up and restore information in Firefox profiles]].

I have just purchased a new desk top. Would like to get my itunes into my new computer. I have downloaded it into my new computer, but how do I get the tunes I have from my other computer into this itunes in my new computer? Thanks

I have just purchased a new desk top. I would like to get my itunes into my new computer. I have downloaded the itunes program. How do I transfer the tunes I have in my itunes account into this computer? I know I have done it before, but can't seem to find how to do it. Thanks.

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.

I have songs appearing as movies on my iTunes - how can I get these songs to appear as songs and not movies?

Please help!
I have random songs that are appearing in my list of movies. I have tried deleting them and then redownloading them from the cloud to get them back into songs. I am successful after redownloading, BUT
...once I close out iTunes and then reenter iTunes, the songs are reappearing as movies.
PLEASE HELP! This is crazy.
Thanks!
-Zach

I had exactly the same problem. Check that the tracks still appear in your iTunes folder under Music (they should if you've re-downloaded them from the cloud). Next, look in your Movies folder and the songs might appear as individual folders. Delete those folders, empty your trash and then delete the tracks from the Movies tab in iTunes.
Hope this helps.

HT1430 I am trying to connect to itunes as my phones says it is disabled, but itunes says to enter password as phone is locked. How do I get the phone to reset as I do not know password?

My phone is saying iphone is disabled, connect to itunes. When I do this, itunes says the phone is locked and I need to enter the password. I do not know the password and it will not give me any other screen, other than the one that says iphone is disabled, connect to itunes. What do I do to reset.

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

Password protected site

I am working with iWeb 1.1.2 and have a password protected site. It was working fine, but I have now changed the user name and the password and I canʻt access it online any more! The user name has 7 letters with 1 being capitalized. The password has 9 characters which includes 1 capital letter, 1 number, and 7 lower case letters. When I try signing on to the site online using Safari, I get a message saying "The user name or password you entered for area “me.com” on web.me.com:80 was incorrect. Make sure you’re entering them correctly, and then try again." What am I doing wrong? Please help! Aloha, Jill

hibiscuslady wrote:
I am working with iWeb 1.1.2
Jill ~ Welcome to the discussions. iWeb 1.1.2 is iWeb '06 and this forum is for iWeb '08. Here's the forum for iWeb '06:
http://discussions.apple.com/forum.jspa?forumID=1108
hibiscuslady wrote:
The user name has 7 letters with 1 being capitalized.
+"This happens if you use upper case letters in the user name."+ Read more in this Apple doc:
_iWeb 1.x: Password-protected sites don't publish to .Mac_
...Found by searching here:
http://support.apple.com/kb/index?page=search
If uncapitalizing the user name doesn't help, MobileMe live chat support is now 24/7 — see this announcement.

Password protected site access problem

I get the following message when I create a password protected site using iWeb '08...
To view this page, you need to log in to the area "me.com" on web.me.com:80
I can't access the page in any browser without a MobileMe/.Mac password to open iDisk. I was planning on launching this site with students tomorrow so they can access my lecture podcasts securely on my site. I can't give them access to my iDisk password obviously. Any suggestions would be greatly appreciated.

I have the same issue when trying to share my gallery. No one can access. Did you find the answer to your issue please ? Thanks

Can't login password protected site in Windows XP !

i use iWeb to make a password protected web page and publish to .Mac. I test it at home using my iMac G5 with Safari and Firefox, everything is ok.
when i am at office today, i test it by using Windows XP PC with Firefox and IE, it just keep asking me the user name and password, i can not login the web page.
i am sure the user name and password is correct.
Why i can login the password protected site in Mac but not Win?
iMac G5 Mac OS X (10.4.4)

I am having the same problem. A friend who uses AOL cannot log in either. Yet I can from my computer with either Safari or Firefox and even with the old version of Explorer that sleeps in the app folder.
Help!!!!!!!!!
They can access a non-password protected site but I want to be able to use passwords.
Do we have to wait for an update for this?
iMac Mac OS X (10.3.9) extra ram

Cannot publish new password protected sites to MobileMe using iWeb

Recently been getting the familiar iWeb error messages when publishing from iWeb to mobile me:
"There was an error updating MobileMe"
"An error occurred while publishing file '/Web/Sites/Sites.rss"
"Publish error: An unknown error occurred"
Did all the troubleshooting stuff detailed here - problem persists.
Today, tho', I've just noticed that these errors *only occur when I'm trying to publish a new password-protected site or trying to apply password-protection to an existing unprotected site*.
It works just fine when publishing a site which is not password-protected. It is also possible to modify an existing password-protected site without any trouble.
There's nothing odd about the passwords - all legal characters etc.
It would be better for me and my users if I could have password protection on my sites. Without passwords, I'm left relying on 'security by obscurity' - not ideal.
What can I do?

AlanGatt wrote:
my many, many sites...
Alan ~ How many? ...iWeb is designed for just a few personal sites — you know, snapshots of the kids for grandma, a travel log, that kind of thing.
AlanGatt wrote:
What can I do?
You could split up your single Domain file into several Domain files each containing a group of sites. You'll have to duplicate (via Finder) the Domain file usually located here:
...and then double-click one of the copies to open it in iWeb. Then delete the site(s) you don't need from it. Repeat the process until you have a more manageable group of Domain files each containing several (or just one) site(s). Note that this process is not easily reversible, i.e. merging Domain files. Read more in Chapter 2 here:
http://iwebfaq.org/site/iWebMultiplewebsites.html
With "many, many sites", this splitting process is not without risk — so before doing anything, don't forget this:
_iWeb ’08: Backing up your Domain file_

IWeb had a password protected site capability. Now what can I use that gives me an equivalent functionality?

Greetings All,
I took over the web site for a club using iWeb. This worked great for several years (2009 to June 30, 2012). I still use iWeb today (minus the password protected members only portion). We have a need for a members only section of the website that is password protected. I put our records, roster, financial notes, members visual directory, etc behind this password protected site. I used iWeb and it was very easy. I have not had this functionality since July 1, 2012 with the demise of mobile me. This is very important to our club and I want to know what other product I can use to make a website with password protection? Any ideas would be greatly appreciated.
Thanks,
Brandon

As Roger has already stated, this password protection needs to be set up on your server directly with the loss of this function with the demise of MobileMe.
There is another alternative however and that would be to re-build/transfer your site to one of the Content Management Systems, such as Joomla, Drupal or WordPress.org if your web host offers this facility. Most good web hosts will allow you to install the CMS's on your server and some have one click installation available.
It is very easy to set up password protected parts of your site using a Content Management System such as Joomla, because it is linked to a database that you need to link to. If you install it manually on your host, then you need to set up the database too and then link together, but most now have one click install, where the database is set up for you automatically - not as much flexibility like this over a manual install, but you can set up protected areas of the site and allow memebers to join and set up parts of the site that only members can get to. You can also set up different grades of membership too, so some can see some parts and others not.
If your site is in need to a revamp then consider this, otherwise stick with iWeb and just set up password protection directly on your server.

Password protect non .mac iweb site?

I publish to a non .mac server (ie, I do not use .mac). I would like to password protect a subsite within my existing iweb site (the main site is public and the subsite is for members only) I know that the password protect feature in iweb is meant for .mac accounts but is there a way for me to work around that and password protect my subsite?

You would have to check with your host. For example, GoDaddy handles it this way:
http://help.godaddy.com/article.php?article_id=1641

I have a password protected site in iweb, but how do I get my users to "sign out" so there not always logged in

Similar Messages

Maybe you are looking for