I have a Pavailion dv9700 entertainment notebook.

There is also a label with dv9815 nr notebook pc.  I am looking for the proper Motherboard to replace the one I have.  I have the Maintenance & Service Guide that shows two different numbers. There is no indication on my present board as to what to replace it with.  The laptop has shared Graphic memory up to 1071 mb.  I am running Vista Operating System.  If further info is needed, please contact me.

Here is the part number pertaining to the system board bundled with your unit:
459567-001  - Systemboard (motherboard) - For full-featured (UMA) PCA, supports AMD Athlon processor 
You can order it from the following weblink:
http://partsurfer.hp.com/Search.aspx?SearchText=KN866UA
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

  • I cant use my finger print to log to windows in my dv6-6b70se entertainment notebook ?

    hi there , i have pavilion dv6-6b70se entertainment notebook
    the finger print scanner stopped working when i log on to windows , this happened after installation of windows update
    i tried solutions provided here , but still i cant use it, it works in the websites

    Is the a Digital Persona fingerprint scanner, also used in teh HP SimplePass Identity Manager? If do the company that make the bioscanner have abandoned it. For more details see https://support.mozilla.com/en-US/questions/799388

  • USB 3.0 Upgrade for HP Pavilion dv9700 CTO Entertainment Notebook PC

    Is it possible to upgrade my HP Pavilion dv9700 CTO Entertainment Notebook PC to USB 3.0?  I've been searching the website and google and haven't found any concrete answers just yet.  I'd rather not have to buy a new laptop just to get USB 3.0.  It's been the most reliable pc I've ever had and I don't wantn to replace it!
    Thanks,
    Paul

    Hi,
    You have to buy a new laptop or swap the system/motherboard or buy an Express card - USB 3 (I've got one) or PC card - USB 3. For desktop , this is much simpler, a PCI - USB 3 card will do.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Possible to connect an external monitor to HP Pavilion dv4t-4200 CTO Entertainment Notebook PC

    I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA port, one that looks like a phone/broadband cable port, and one that looks like a USB port but indented on either side at the bottom. Can I even connect an external monitor? How do I find out if I have more than 1 video card? Besides the usual USB/headphone ports, I don't have any other ports. It says my drivers are up to date...but I don't even know what I should be looking for. Do I need to install something or buy some sort of adapter? 
    I am trying to connect a Dell external montitor via the VGA port with a VGA cable. The monitor has power but my notebook does not recognize/detect it. However, when I first plugged it in, my notebook display shrank into a square (vs the whole screen) so it recognized something...but nothing happened on the external monitor. 
    I tried detecting it via my display settings, but  I accidentally changed some dispaly setting so that the home desktop only shows on monitor 1, but unselected my actual notebook display or something or changed it to be monitor 2 (even though monitor 1 does not exist), so when I plug the cable in to my notebook, all of a sudden my desktop goes away and it's a just a blank background screen - and I cannot access the computer display settings or anything.... when the cable is unplugged this setting looks normal, so I can't figure out how to fix it. 
    Sorry, I have no idea what I'm doing here - please help! 
    This question was solved.
    View Solution.

    Hi,
    All Dell monitors come with CD's for drivers. Your laptop may not know the monitor w/o its driver, it won't install automatically. Please check:
    Ringht click a blank space on desktop,
    Click Personalize
    Click Display
    Click Change display settings
    Can you see BOTH laptop screen and external monitor in there as shown on the following image:
    For testing, I put my Dell monitor is my main display. If I can't see 2 monitor, you need its driver first and then check the cable.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Quickweb software upgrade for HP Pavilion dv6t-3000 CTO Entertainment Notebook PC Drivers

    Hi
    I have purchased my laptop in the year 2010 from HP. Now i need to upgrade HP QuickWeb software .
    My current version is less than 1.0. I guess we have latest version as 3 or above..
    Please let me know how to update the software to version 3 or greater.
    Here is my laptop model
    HP Pavilion dv6t-3000 CTO Entertainment Notebook PC
    Product name: HP Pavilion dv6 Notebook PC
    Windows 7 Home Premium 64-bit Service Pack 1

    Hello @SridharGaddam,
    I understand that you are looking for an upgraded version of HP Quickweb for your HP Pavilion dv6t-3000 CTO Notebook PC. I am providing you with a link to the HP Pavilion dv6t-3000 CTO Entertainment Notebook PC Drivers, which has all the most current drivers and software available for your computer. This is the software that HP has updated for your computer, and if you do not see the software you are looking for that means it is not compatible with your computer.
    I hope this answers your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Can i change graphic settings on a "HP Pavilion dv6-3161eo Entertainment notebook pc"?

    Hi
    I have a "HP Pavilion dv6-3161eo Entertainment notebook pc" and I run Windows 7 64-bit. Lately I bought a lot of games, and I was hoping to play them without any problems. I have been able to before, so nothing should get in my way for doing it now. But it seems that my graphic settings keep changing from time to time, since when I play, I get a lot of lagg, both online and offline. Sometimes I can play the games without any lagg, but the most times the games lagg when I play them. The times when I can play without any problems, I can also watch HD movies online, which I can't when i can't play the games without lagg. To make an example, I bought a game called "Elder Scrolls V: Skyrim". When the game starts up, it automatically "Detect your video hardware and set video options accordingly". The most times when I start up the game, it sets the video quality to "low quality", but sometimes it sets the video quality to "high quality". Those times, I can also play the other games without lagg. I am almost sure, it is because my graphic settings on the pc are being changed, but I dont know how, or how to do it manually. So is it possible to solve this problem and/or change the graphic settings manually?

    You might have too many things running on the pc, such as browsers, music players, downloaders as you load the game which would explain the erratic behavior of the game checking your available settings.
    PS, Skyrim Rocks, as does MW3
    Signature:
    I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

  • Sound Issues HP Pavilion dv6-6158nr Entertainment Notebook PC

    Hello,
     I have HP Pavilion dv6-6158nr Entertainment Notebook PC with Windows 7 Pro 64-bit OS. Recently I noticed issues with how my volume control works. I am not sure if it's an application issue (Firefox 9/10) or audio drivers. While watching playing an audio file or watching video my default playback device is set to speaker, but as soon as I plugin my headphones both headphones and speakers will go to mute. Some times disabling and re-enabling the device will solve this issue, and other than that I also have to restart Firefox to get the sound back.
     Tried installing all the available updates form windows, also reinstalled/update the sound drivers as n admin with no possible fix. Also as shown in picture below, when I try to make a Google call using Firefox I use built-in mike an headphones. During that time headphones icon will be appeared in the window shown below listed as communication device and disable both audio in/out.
    Let me know if any further information is required.
    Thanks.

    First uninstall the audio driver:
    Click Start and type device in the search field, then select Device Manager. >> Audio, video and game controlar >> right click and uninstall all values under it >> restart >> download and install the following drivers:
    BIOS
    Audio
    ||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
    //Click on Kudos if my reply was helpful and answered your question//
    ||-If my answer solved the problem please mark the topic as the accepted solution-||

  • HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working

    Hi there,
    I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
    I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
    All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
    Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
    Your prompt response is highly appreciated.
    Sincerely,
    Led
    This question was solved.
    View Solution.

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
    We will surely assist you with this
    Steps to drain the Static charge and loading default BIOS settings to resolve the issue
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
    Step 03. Press and Hold the Power Button of the Notebook for a full minute
    Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
    Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
    Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
    Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
    Step 08. Now please wait till the Unit loads the Windows Operating system
    Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
    Please Click this Link to find more troubleshooting steps to resolve this issue
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP PAVILION TX2000 ENTERTAINMENT NOTEBOOK PC ISSUES!!!

    LET ME GET THIS STRAIGHT.I BOUGHT A TX2000 LAPTOP A YEAR AND A HALF AGO.THE THOUGHT OF IT MADE ME HAPPY SINCE THIS LAPTOP COST MUCH AND I WAS ONE OF THE FEW WHO WAS ABLE TO BUY IT.AFTER A YEAR AND 2 MONTHS,IT SUDDENLY HANGED IN THE MIDDLE OF MY WORK AND WON'T TURN ON.CONSIDERING THAT IT IS OUT OF WARRANTY,HP DID NOT GIVE A HELL OUT OF MY QUESTIONS.SO I JUST CONSIDERED THAT MAYBE BECAUSE I OVER USED IT OR WHATEVER.BUT AFTER I READ COMPLAINTS ON THE SAME MODEL,I SUDDENLY REALIZED THAT IT IS NOT MY FAULT BUT THE FAULT OF THE COMPANY.
    PROBLEM:AFTER TURNING THE MACHINE ON,FAN AND LIGHTS ARE ON BUT IT NOTHING WILL APPEAR ON SCREEN.
    I TRIED PLUGGING IT TO A DIFFERENT MONITOR AND STILL NOTHING.THEN I REMEMBERED THAT NO MATTER HOW COLD THE PLACE OR ROOM WHERE I WAS USING THE MACHINE,THE HEAT OF THE LAPTOP KEEPS ON INCREASING!!!
    TELL ME,IS IT THE CUSTOMER'S FAULT?I,TOGETHER WITH SOME WHO I AM SURE WILL SUPPORT ME, DEMANDS A RECALL ON THIS PRODUCT SINCE AS WE CONNECT STORIES,IT OCCURS AFTER USING IT FOR A YEAR.COINCIDENCE OR INTENTION???
    PLEASE HP,IF YOU DON'T WANT TO LOSE CUSTOMERS AND LOSE TRUST, PLEASE HEED THIS REQUEST OF MINE AND RECALL THE PRODUCT!!!
    PRODUCT NAME:HP PAVILION TX2000 ENTERTAINMENT NOTEBOOK PC

    I also have the tx2000 with nothing but problems.  If you get the blank screen here is what you need to do:
    Turn the computer off and flip it over.  Blow dry through the vents on medium heat for about a minute.  Keep the blowdryer moving.  Wait a minute and then turn it back on.   The heat from blow dryer warms up the chip and it will work again.  I have to do this every once in a while with mine.  And also make sure you buy a laptop cooling fan for yours.  I have mine on continuously and it helps, although it still overheats on occasion.
    Here is a class action lawsuit that was just settled:  http://forum.notebookreview.com/hp-compaq/521913-nvidia-reaches-settlement-class-action-suit-affecti...
    Unfortunately for some reason it doesn't look like the tx2000 is included.  I may just take them to small claims court.
    Kelly

  • HP Pavilion tx2510us Entertainment Notebook PC

    I have a HP Pavilion tx2510us Entertainment Notebook PC (original installed with Windows Vista) upgraded to Windows 7.  When I power on the machine all I get is a black scrren.  I can hear the fan, and see lites on  but the screen stays black,  I have taken all peripherals out, I have rtaken  the memory out and put it back, I have treied an alternate monitor, I have tried to get into bios.  I have also done a hard reset (took battery out, unconnected the ac power and held the power button down).  An recommendations would be greatly appreciated.

    Hello JORDANWILL822.  I understand you're unable to get your notebook to properly boot.
    This is definitely a hardware problem.  You're unable to get a picture on the internal or external monitors.  However, the notebook appears to be powering on and otherwise running.  This means that it is likely that the video card is no longer functioning properly.
    I would suggest checking the cable connection first.  Here is a link to your notebook's Maintenance and Service Guide.  This covers the disassembly of the notebook and would be invaluable for checking the connection.
    If the connection is secure then you likely need to have the notebook repaired.  
    If the notebook isn't in warranty I suggest taking it to a local computer repair shop.  This sort of problem is really best diagnosed hands-on.  Many times these shops will even diagnose the issue while you're in the store.
    If the notebook is in warranty or you'd like to inquire about a repair through HP I suggest contacting support.  If you're in the US/Canada the number is 1-800-474-6836.  If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.  
    I will keep an eye out for your next reply.  I hope you have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • HP Pavilion dv6z-6b00 CTO Quad Edition Entertainment Notebook PC Rom is unstable and stop working

    I have a HP Pavilion dv6z-6b00 CTO Quad Edition Entertainment Notebook PC  The DVD became unstable and stopped seeing CDs and DVD's  If i put in a disc in drive E: I get the error message  Insert a Disc in to drive E:. If I leave a DVD or CD in the Rom and reboot the PC the ROM will see the Disc until I change the Disc the I get the error message Insert a Disc in to drive E: I called Hp support and they sent me a new Rom.  I installed the rom.  Tested It, and It worked great until an update message appeared. So I installed the critical updates and after the install the Rom stopped see CD's or DVD.   The new Rom is a  hp DVDRAM GT31L SATA Cdrom.   Can any one help? 

    Hi,
    Try the following to manually replace the driver for the optical drive.
    1.  Download the following utility that will add 'Take Ownership' to the right click context menu.  The download is on the following link.
    Take Ownership
    This is a zipped file.  If you don't have an extraction utility installed, download and install 7-Zip  ( if you have a 64bit version of Windows, you will need this version 7-Zip ) which can be used to open this so that you can run the installer.  Then just right click the zipped folder, select 7-Zip and select Extract Files.  When done, open the newly extracted folder and you will find the utility to add 'Take Ownership' to the right click menu.  Just double click it to install and then close the window.
    2.  Open windows Control Panel, open Device Manager, open up DVD/CD-ROM Drives.  Right click the drive and select uninstall and click the prompt to complete this.
    3.  Click the Start Menu, open Computer, double click Local Disk C, open the folder 'Windows', open the folder 'System32', right click the folder 'drivers' and select Take Ownership.
    Just below this folder, open the folder 'DriverStore', open the folder 'FileRepository', open the folder that starts 'cdrom.inf', right click the 'cdrom.sys' file and select Copy.
    Close all open windows and then Paste this file on your Desktop.
    4.  Once again, click the Start Menu, open Computer, double click Local Disk C, open the folder 'Windows', open the folder 'System32', then this time open the folder 'drivers', right click and select Paste.  You should now get a prompt that the file already exists - select the Copy and Replace option and click on any further prompts to complete this.
    When done, close all open windows and restart the notebook - when Windows reloads let it install the device driver and then let it idle for a couple of minutes.
    Check if the drive now works correctly.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HD Replacement for HP Pavilion dm1z-3000 CTO Entertainment Notebook PC

    Hello.
    I have a HP Pavilion dm1z-3000 CTO Entertainment Notebook PC , Product Number:   XL303AV
    I am having SMART HD monitor failure mensage at startup and the computer is very slow.
    I just bought a OCZ Vertex V3 SSD 256mb and i want to create a recovery media but the recovery media creation in my computer is not working.
    I did a backup of my files and a complete recovery from the F11 at startup.
    The Notebook is runnig good, but the SMART screen reporting failure keeps appearing and windows is poping up HD failure alert.
    The recovery media creation keeps not working (32GB USB drive), the formating step do not end never. I already tryied with another USB pendrive and no sucess.
    The recovery partition is there. How to create a recovery media for my new SSD HD ?
    Other problem:
    I tryied to order the recovery media at HP site but i have a USA buyed notebook and i live in Brazil, and it is impossible to order that for shipping to Brazil (stupid). HP Brazil do not recognize my serial and produt number, sending me to USA site.
    My windows 7 is the 64bits Home Premium.
    Help me
    Regards
    Cristiano

    Hi,
    If the impending failure alert from the HD SMART is popping up, then creating USB  from the original hard disk at this point is not likely to be successful.
    You can try copying the recovery partition to an external drive in order to keep it.  Use the OCZTechnology forum as a source for how to initially setup the SSD drive. I have a Vertex 3 SSD in this particular desktop PC and I love the performance it provides.
    What was the size of the original hard disk?
    I highly recommend that you use the Porutgese language HP Consumer support forum if you are familiar with the language. There are experts there who are quite likely to be familiar with the problem you are facing with in acquiring the recovery disk set.  I met some of them last March in San Francisco at the HP Social Summit.
    All you need to do to access the Portugese language HP Global forum is change the language tab at the upper right where it says English to Portugese.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive Replacement

    Hello,
    I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC and I had had hard drive issues from within warranty period. i.e. I purchase in 2010 and had a hard drive replaced in 2011 and again in 2012. Next time it failed in 2013 (almost 11 months apart on an average).
    Last time when it failed, the warranty had expired so I thought of giving it a few try e.g. running thru bad sector fixing/writing-off softwares from seagate, Toshiba....this got me out of Smart Drive Error.
    I have been using the HDD for sometime now but want to be prepared for the next round and I'm sure it'll be gone for good the next time.
    Current HDD is 640GB, 7200 RPM Hardrive (replaced in 2012). HP Part# 621046-001.
    When replacing, can I use ANY 640GB hard drive? Can I use a hard drive that is larger than 640 GB? Different RPM?
    Any suggestions about hard drive?
    The recovery discs I had received with the replacement drive did not work correctly. I had to use the first set I had created right after I purchased the laptop. 
    Thank you.
    --Pratik Patel
    This question was solved.
    View Solution.

    Hi Pratik Patel
    According to product manual:
    Your system supports SATA 9.5mm or 12.5mm , 2.5" HDDs
    supports upto 2 hard drives
    supports SSD too.
    Single hard drive configurations supported:
    250GB, 320GB, 500GB @7200RPM @9.5mm
    640GB @5400RPM @9.5mm
    750GB, 1TB @5400RPM @12.5mm
    160GB SSD
    If you want dual hard drive configurations, please click following link (user manual):
    http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf
    But, there is not hard fast rules that only 5400rpm can be used instead of 7200rpm, which was used to replace your earlier hdd.
    hope this has helped you.
    thanks
    Visruth
    **CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH SAME PROBLEM**
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • HP Pavilion dv7t-3000 CTO Entertainment Notebook PC motherboard replacement

    Hi,
    I have an HP Pavilion dv7t-3000 CTO Entertainment Notebook PC with the black screen (of death) due to a known fault with the graphics chip. I have been trying to buy a replacement motherboard at an affordable price that does not have this problem. I have seen several HP Pavilion motherboards that look very similar to mine, but have a different part number. Can anyone tell me or recommend a replacement motherboard that is compatible with my laptop and hopefully does not have this known graphics chip problem. Thanks for your time and support.
    Regards
    rac373

    rac373 wrote:
    Hi,
    I have an HP Pavilion dv7t-3000 CTO Entertainment Notebook PC with the black screen (of death) due to a known fault with the graphics chip. I have been trying to buy a replacement motherboard at an affordable price that does not have this problem. I have seen several HP Pavilion motherboards that look very similar to mine, but have a different part number. Can anyone tell me or recommend a replacement motherboard that is compatible with my laptop and hopefully does not have this known graphics chip problem. Thanks for your time and support.
    Regards
    rac373
    We need the P/N to verify what board will fit in that laptop and also you can use that P/N from service manual to locate the part on eBay to find a match or call HP support to see what the board would cost.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade Processor

    Hello,
    Any help would be appreciated.
    I have an HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Because of a new job I need to update my processor from the current 2.30 GHz (see exact specs below, please) to at least 3.0 GHz.
    Is there a 3.0GHz processor out there that is compatible with this particular computer? I've called technical support and was told they don't know. I really don't know who else to ask.
    This computer was just purchased a few months ago (before I got the new job). I would really like to avoid purchasing a new computer, if at all possible, if I can upgrade the processor in this one.
    Here are the specs of the current processor:
    Intel Core i7 3610QM
    Code Name    Ivy Bridge
    Package    Socket 988B rPGA
    Technology    22nm
    Specification    Intel Core i7-3610QM CPU @ 2.30GHz
    Thanks in advance.
    This question was solved.
    View Solution.

    Well, there appears to be just one (that I've found) 3.0 GHz processor that Intel makes for my chipset  (HM77 Express Chipset) and it's the i7-3940XM Extreme edition (http://ark.intel.com/products/71096/)
    At a retail price of $1,000+ it looks like I'm going shopping for a new computer. 
    Not sure if anyone from HP read the peer forums, however, I will not be purchasing another HP product.
    This machine has had issues outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lacking in all areas Your techscannot even pull up the model number with the serial number.
    Customers should not have to go out on the Internet to research questions like this.

Maybe you are looking for