I have a PC (not Mac/apple computer) with dual monitors.
I have a problem with itune in full screen blacking out my second monitor. How do I fix this problem?
Put something, anything on the second screen.
Does this only happen when iTunes is maximized?
Similar Messages
-
Mac and Windows with dual monitors Question
I use a Intel MacPro running Tiger with latest updates in my church. We use the Mac and Keynote 2.0.2 to present PowerPoint slides on the big screen (dual outputs). Everything was going well until the pastors upgraded to new computers running Vista and Office 2007. Now neither pastor's files will load into Keynote. It comes up with an error. The pastors have saved their files from PP as 2003 PPT files, and they still will not open. Error - unable to open file type. The one pastor went back to XP (dumped Vista) but still used the Office 2007 program and saved as PP2003, but the error still appears.
FYI - I noticed that Office 2007 saves with a file with the extension of .pptx instead of the .ppt. Checking the file they gave me shows that it is indead a .ppt file and not .pptx file. It makes no difference.
I believe it is an Office 2007 problem I'm dealing with. I have taken the .ppt file and loaded it onto the PC running PP 2003 and it loads fine, except for some format problems. I then resave it with a different name and tried to load that file (hoping it was converted) , with the same error showing. The problem is transfered with the file. Other files created with the PP 2003 program load fine into Keynote, so it has to be the Office2007 doing something.
So the questions are, is there an easy fix and still use the Keynote program, OR does Keynote 3 take care of this problem in the upgrade, OR should I install Win XP home or Pro and use parallels (which I have)? Would WinXP Home be enough to support the dual outputs and be fast enough? I am familiar with XP Pro not Home.
Any information you may have, could be a help. I need this resolved soon. I hate having to bring in the old Windows PC, after enjoying the quality of the Mac.David.Austin.Allen wrote:
You should not have issues attaching two displays to the Mac mini. You will not be able to use an iPad as one of those displays.
I have no issues streaming video on demand from all of the media sources which you have listed. My Mac mini is the Early '09, so my hardware is not as powerful as the newest Mac mini.
Dah•veed
Thanks David - glad to here the Mini supports dual monitors, and you're not having any streaming issues. Did you have any special settings, like "no hardware acceleration"? Are you streaming HD content?
If it supports dual monitors, then I would think the iPad could be used as a second display and input device - the demos I've seen with Air Display (from Avatron Software") would accomplish what I'm looking for. Here is a demo at http://www.vimeo.com/16950420 showing the iPad working with a Windows machine, but I've seen them working with Macs as well.
Thanks again
Michael -
OpenGL freezes computer with dual monitors and fglrx
I am trying to use the fglrx driver, and with a single monitor I seem to have gotten everything working.
However I am running into issues with two monitors. Basically, when I have two monitors any opengl program doesn't run properly.
There are two cases. If I use the xorg.conf generated by "aticonfig --initial", it still seems to detect the other monitor (although there is a black region on my gnome desktop). If an opengl program is run, the screen goes crazy where random pixels are changing different colors. I can end the program, and everything goes back to normal.
Using the program "amdcccle" I generated xorg.conf for dual monitors (I pasted it below). When I use this configuration, any opengl program completely freezes the computer instantly.
I have been looking for a while, but have not found any information that might lead to a solution. Does anyone here have any advice?
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP10"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP10" "0-DFP10"
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-0"
Device "amdcccle-Device[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3600 1920
Depth 24
EndSubSection
EndSection+Sorry. I mean "right" in the last sentence.+
Hello.
I put my second monitor of a dual monitor set-up to the left of the main monitor - the one with the FC application, keyboard and mouse, etc. Trouble is the mouse kept hitting the left hand wall of my main monitor when I tried to send it to the second monitor. After a while I realized the mouse/computer thinks the second monitor is to its right, so I have to exit the right hand side of the main monitor to get to the one on the left.
Is there any way to instruct FC and the mouse that the second monitor is on the left? Can the mouse be instructed to "pass" through the left hand wall of the main monitor rather than the right? Or must the second monitor always go the right of the main monitor?
Thanks.
John -
Snow Leopard does not remember screen position with dual monitor
Hello,
I have an external monitor, which I like to be on top of my Macbook Pro monitor. In the monitor preference pane, I can set the monitor disposition such that my external monitor (main monitor) appears on top of my laptop (secondary monitor). However, every time I unplug the external monitor, I have to do the settings again, because when I plug it back, it shows as "side-by-side" configuration.
How can I make this setting stick ?
ThanksTry deleting a related plist:
~yourUserName/Library/Preferences/com.apple.systempreferences.plist
Then reset position. -
I am so done with this. 8,000 songs on my iTunes app and now I only have 256 songs!! I purchased a new computer and had backed up all my content onto an external hard drive. When I downloaded the content onto the new computer, I was unable to access my music for 90 days!! What a bunch of BS! $8,000 down the drain, just like that. This is ludicruis! I have tried to contact support but they require some sort of serial number, don't have one, this is not an Apple computer. So their support ***** as they only give you one option to contact them. I still have my content on the back up but am afraid to re-download in fear I won't have access to the material for another 90 days! Has anyone else had this problem? I feel like I've been ripped off!
Oh, right, in order for me to post this message I had to select a community. If I don't, it won't post it. What a bunch of control freaks! I'm just going to select one to get this posted and hopefully, someone can help me.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
To fine SN
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
However, Apple will charge you for telephne support since you our not within warranty -
I am trying to retrieve my photos from my I phone 4s because the screen is smashed. The pc that I use is windows not an apple computer. Can anyone give me step by step instructions how I can get my photos? Also, I don't have icloud
If the iPhone is still working and the photos are in the Camera Roll (i.e., taken on the iPhone) then, when you connect the iPhone to your PC, it should be recognized as a Camera and Windows should start AutoPlay.
See this http://windows.microsoft.com/en-us/windows/get-pictures-camera-computer#1TC=wind ows-7 -
Does adobe make a version for a older apple computer, with a safari version 5.1.10 and snow leopard 10.6.8 .
Flash Player is still supported on that os/browser combination (see Adobe Flash Player | Tech specs). You can download the latest version from http://get.adobe.com/flashplayer.
Maria -
I have a 2nd Gen MAc book Air with Lion . The 60GB hard disc has quickly filled up despite me keeping most of my data on a portable hard drive . I used disk inspector to locate the problem but found that it was was in 20 GB of hidden files in my user directory . Is this correct and is there anything i can do about it ? Using disk inspector you can not see individual hudden diretories or files. I did unhide them but there is a mass of diretories etc and so no way i could see if this is one or multiple files using the space. Library System and Applications are at 4 3 and 3 GB respectvely. The data I actually keep on there is 9GB Thanks for any help
I think the problem is Quick Time Player. I am using OS 10.6.8 by the way.
I tried it out again.
I had about 26 GB of space before I played an .avi video.
After the movie started to play (it was slow to load), I got a warning message that my startup disk was full. I opened Disk Utility and it told me I had no space left (about 20 MB or something like that was left).
I watched to the end of the movie.
Then I quit Quicktime Player.
And I shut down the computer.
I turned on the computer and checked Disk Utility. I have about 26 GB of space.
I think for some reason Quicktime Player uses up a lot of the disk space when it runs movies that are problematic. This movie I was watching did not open with vlc.
I normally use vlc to watch movies.
Probably it doesn't use up this much space when the movie is OK.
I think there's a problem with this particular movie. It is about 50 MB so it's not that big a file. I watch .smi subtitles with it. The Quicktime Player automatically loads the subtitle file in this case because the subtitle file has the same name as the movie file.
I watched about 10 movie files from the same series that I downloaded together and did not have any problem watching them. I watched them on vlc. But this latest movie had problems I think (as I repeat). It did not load on vlc even though I waited for a minute, and normally movies load instantly on vlc.
So I think that movie file caused problems. It made QT player use up a lot of hard disk space.
I had better avoid watching that movie in the future. I don't want it to wreck my hard drive.
So to sum up, everything is back to normal. I have the hard disk space that I should have. However, I am scared of damaging my hard drive due to shonky movie files that eat up all the space when they are played using QT player, and so I will not watch those files in the future, as I do not know why the files do that. -
i have LR5 on a mac book pro with a WD external hard drive with my with my LR5 images . my problem is my external drive is corrupted .i was told by apple that my macshow the hard drive is there but it is not moumting and have to be reformat. i have to use recovery data to save my images on my external before i can refomat.iam willing to lose my images on my extenal hard drive but i would like to know can i erase my LR5 images and start over or delete LR5 and download it again
Simply start a new catalog:
File >> New Catalog
Choose a new name and save.
When the empty catalog launches you are ready to start over. -
I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any suggestions
If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
Best of luck. -
What if I purchase a new Apple computer with Lion pre-installed?
What if I purchase a new Apple computer with Lion pre-installed. Will I be able to somehow put Lion on a previously owned computer?
Not without buying it again.
(59627) -
How do i have CC on home and work computer with same account?
How do i have CC on home and work computer with same account?
Hi Markofm,
You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to De-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription. This is the same licensing between which we have for our perpetual product. An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
Thanks & Regards,
Sanjeeta -
Mavericks will not sync Apple Contacts with Google, Linkedin, and Facebook?
I just upgraded to Mavericks. Here is what I find shocking...
1. Mavericks will NOT sync Apple Contacts with Google Contacts and vice-versa.
2. During the upgrade, Mavericks linked some of my Apple Contact cards with Google Contacts, but not all of them. It need to be clarified that linking is not syncing. Worse, it corrupted data, and deleted some of the contacts on Google Contacts.
3. Similarly, Apple Contacts will not sync with Linkedin or Facebook Contacts.
4. When I contacted Apple, Level 1 support had not idea and assumed that adding a Google Account with automatically sync Apple Contacts with Google Contacts as it did in OS Mountain Lion. Level 2 support did not have much of an idea either, but called me this morning to say that the matter has been escalated, and confirmed that OS X Maverick does NOT sync Apple Contacts with Google Contacts.
CAUTION before upgrading to Mavericks:
5. Your Google Contacts / Android devices will not be updated by Apple Contacts, and vice-versa.
6. Your Facebook / Linkedin contats will not be updated by Apple Contacts, and vice-versa.
The workaround:
7. Before upgrade, ensure that your Mountain Lion or earlier address book in synced with Google Contacts.
8. After upgrade, go to Contacts > Preferences > General > Default Account, and choose your Google Account as your default account. You will now add New Contact (or update existing Google Contacts) in Google Contacts, which your android devices can sync with. You will also see your Google Contacts in Apple Contacts. However, Apple Contacts will NOT sync with Google Contacts and vice-versa.
Welcome to Mavericks...With all due respect @McFly_Marty, kindly do not mislead readers. As funny as it may sound, but you have been taken for a royal ride by Apple Support. Keep in mind that the tough taskmaster Steve Jobs, is no longer there, and it is no surprise that Apple’s innovations are sliding.
You probably have chosen Google as your default account under "Contacts > Preferences > General > Default Account”.
Now, when you add New Contact (or update existing Google Contacts) in Google Contacts, you will also see your Google Contacts in Apple Contacts. However, Apple Contacts will NOT sync with Google Contacts and vice-versa.
Try disabling your Google account in Apple Contacts, and all your new contacts are no longer in Apple contacts. Therefore Apple contacts is not syncing with Google Contacts.
Therefore, read the following from my original post again.
“1. Mavericks will NOT sync Apple Contacts with Google Contacts and vice-versa.
4. When I contacted Apple, Level 1 support had no idea and assumed that adding a Google Account will automatically sync Apple Contacts with Google Contacts as it did in OS Mountain Lion. Level 2 support did not have much of an idea either, but called me this morning to say that the matter has been escalated, and confirmed that OS X Maverick does NOT sync Apple Contacts with Google Contacts.
CAUTION before upgrading to Mavericks:
5. Your Google Contacts / Android devices will not be updated by Apple Contacts, and vice-versa.
6. Your Facebook / Linkedin contacts will not be updated by Apple Contacts, and vice-versa.
The workaround:
8. After upgrade, go to Contacts > Preferences > General > Default Account, and choose your Google Account as your default account. You will now add New Contact (or update existing Google Contacts) in Google Contacts, which your android devices can sync with. You will also see your Google Contacts in Apple Contacts. However, Apple Contacts will NOT sync with Google Contacts and vice-versa.”
Welcome to Maverick disaster... -
What if my error message is the following: The backup disk image “/Volumes/********'s Time Capsul/****’s MacBook Pro.sparsebundle” is already in use. (I have redacted the name of the computer with asterixes)
This is a complex procedure.
Pull the power cord from the back of the Time Capsule
Wait a minute or two
Plug the power cord back in to the back of the Time Capsule
This will fix the issue 98% of the time. If you are in the unlucky 2% category, more help is here from Pondini, the Time Machine guru:
The Backup disk image ... sparsebundle ... is already in use. -
I have problem to adjust my apple id with app store and before there was submitted another apple id?
I have problem to adjust my apple id with app store and before there was submitted another apple id?
settings->store change the appleID to what you want
Maybe you are looking for
-
Htmlb:Retrive values from bean n display it in textView
Hi, I am doing one PDK application using jspdyn page. In jsp page I am using htmlb to display the table. In that I am using one text view element. There I need to get the values from bean class.And display it in a table. Can anyone help me how can us
-
When sharing pages document can others make changes/type on the form created as needed?
when sharing pages that have specific layout can that remain and still type as needed?
-
Need help in SOAP - PI - ECC via proxy
Hi All, I am working on BPM ---Soap--> PI ---Proxy--> ECC scenario in PI 7.31 single stack. I may get multiple requests to PI for the same material. In that case I have to create a Queue based on material and wait for sometime( say 5 sec) and send t
-
Centro At&t - download sms to Palm desktop?
Posted in the wrong area. ActiveSync is for Windows Mobile devices. I am a Volunteer here, not employed by HP. You too can become an HP Expert! Details HERE! If my post has helped you, click the Kudos Thumbs up! If it solved your issue, Click the "Ac
-
HT201413 how to reset the whole thing of the Ipod touch
My mom had changed my password I tired it 10 time to unlock it but now my Ipod is disable for 21,595,,222 how do I reset the whole thing and change my won password