I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimat
I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimator 5.1. Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1. What should I do?
clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Similar Messages
-
I have had my laptop for about 5 or 6 yrs. I have had iTunes on it since I have had it. All of sudden my iTunes has stopped working. I am receiving an Error 6034 message. What has happened? I uninstalled it and tried to reinstall but did not help. I am still getting the message. I am not having any problems with it on any of my other devices. Thanks for any help that anyone can give me. mproffitt
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
Rstrui.exe Create a system restore point on windows server 8 standard
Hi,
Before making system changes, I need to create a system restore point on windows server 2008 Standard with SP2 installed., I found where to accomplish that via the UI, but the file isn't found when I search the C:\windows directory on the server.
The executable should be C:\windows\system32\rstrui.exe, unless it was changed for Server 2008. I have system protection turned on for the C: drive.This problem also exists on Windows server R2 enterprise with all updates applied.
I searched the install media (DVD) it wasn't there. I tried the full name (rstrui.exe) as well as truncated versions. I've searched on all of the applicable forums for rstrui.exe and "create system restore point".
Does someone know where I can get rstrui.exe for windows server 8. It's not available on windows server R2 enterprise or essentials either. If there is an alternative method of creating restore points on windows server 8, please point me in the
correct direction. Is it available in any of the variations of windows server 12. I have all of the updates installed when checking for how to create a system restore point or with searching for rstrui.exe. BTW, performing "system backups" or implementing
"previous versions" functionality work just fine.
Thank you in advance,
SteveHi Steve,
I replied the same question you posted earlier:
https://social.technet.microsoft.com/Forums/en-US/68352496-2fe8-4320-8848-f22d0d1a6f6b/rstruiexe-missing-unable-to-create-restore-point-windows-server-8-std-r2?forum=windowsbackup
To me it seems that the function is removed in both Windows 2008 SP2 and Windows 2008 R2. Here is my original reply:
I did not find this file either on my new-installed Windows 2008 SP2 system. I assume it is retired in Windows Server 2008 and the function is replaced by Windows Server Backup. I cannot confirm why there is still an option in MSCONFIG which point to
rstrui.exe but I can find the file nowhere. Also this option is removed in Windows Server 2008 R2.
Here link a link for using Windows Server Backup to create system state backup as a restore point:
Recover
the System State
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Visual Studio Update 2 hangs for 13 minutes on "Creating a system restore point..."
It appears that Visual Studio 2012 Update 2 hangs for a long period of time before it tries to create a system restore point. Should I create a Microsoft Connect issue for this?
Here is what I did:
I created a new Windows 8 x86 Virtual Machine using VirtualBox. I installed Visual Studio 2012 and Update 1 because Update 2 was not yet out. I came back 1 week later and tried to install Visual Studio Update 2.
When I ran the installer on the Virtual machine, it hung for seemingly 10 minutes at "Creating a system restore point..." I powered off the virtual machine and disabled system restore. I then ran with the /layout option on the host machine
so I could pre-download the files. Then I tried again.
Again, it hung. This time I let it go. It hung for exactly 13 minutes before it gave up and continued on to the install. The log file says this:
[0EBC:0F90][2013-04-18T12:39:36]: Apply begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Apply Phase Begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: -----------------
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Metrics: ShouldSendData=False
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Free Disk Space before install: SystemDrive C:\ 32519413760 bytes AppDrive C:\ 32519413760 bytes
[01F4:0748][2013-04-18T12:52:34]: Creating a system restore point.
[01F4:0748][2013-04-18T12:52:34]: Could not create system restore point, error: 0x80070422. Continuing...
NOTE: Although it says "Creating a system restore point" at 12:52, it actually displayed the message on the screen at 12:39. That indicates that it was really doing something else during those 13 minutes, not creating the restore point.
That is corroborated by the fact that it took a long time regardless of system restore being on or off.
If no one has any information or explanation, I will create an issue on Microsoft Connect.I have the same issue. Visual Studio 2013 Professional update 2 was not installed from Web installer. Rather I downloaded a trial version and now want to uninstall it. However, I let the uninstaller try to create a Restore Point all night while I slept.
Next day, not done. So I clicked cancel, and it then commenced to create a restore point for the cancel. I did let the cancel run for awhile but I rebooted.
I then researched something on how to disable the restore point security on my drive, but that did not deter Visual Studio from trying to protect me and it TRIES to create a restore point before uninstalling. Just hangs forever. I don't need a restore point
for an eval copy of VS, thank you very much. Perhaps a simple dialog ("Do you want to create a restore point?") would be helpful?
Update: turning off Windows Defender fixed the problem. -
Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]"
Is there a solution to years old error message "Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]" I have been trying to create a restore point or image on an external hard drice, but I get the quoted message
and the system is NOT in safe mode. I have reviewed all the previous suggestions on this forum to no avail. Are there any new suggestions. My computer had Windows 7 installed and I have no source to re-load the OS. RalphHi,
So actually you're not in safe mode (not black background, no "safe mode" on the left-bottom of the screen), right?
I think something is causing your PC thinking itself is in the safe mode, run sfc/scannow and chkdsk /f/r, check if the two tools can find any error.
Or perform a startup repair in recovery console, check the result
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
Yolanda Zhu
TechNet Community Support -
My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?
Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.
-
hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though
Hi Omid,
Please refer to the help document below to fix the error 16:
Configuration error 16 | CC, CS
If the issue persists, please contact the support:
Contact Customer Care
Regards,
Sheena -
How to create a system restore point in cmd
We team's server can't work before patched
We patched every firday.
So,I want to create a task to run 'bat' for creating restore point
研小艾I know the "rstrui.exe" , it can restore system.
but I don't know the exe name to create restore point.
研小艾 -
I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express. -
Creating System Restore Points in Windows Server 2012
Searching for "Create a restore point" on Windows Server 2012, brings up a link that when clicked takes you to System Properties. Once there, there is no System Protection tab or option to create a system restore point. Windows Server Backup
is installed and functioning.
Is this feature available in Windows Server 2012? Was it replaced with Shadow Copies for Shared Folders?
Thanks for any insight you can provide.HI,
To create a system restore point, run msconfig.exe, that will launch a UI, click the tools tab, select system restore, that should invoke a UI which asks if you want to restore to an earlier version or do you want to create a new restore point. I clicked
"create a new restore point" The problem that I ran into is that when I click that button is I receive the error: can't find "C:\Windows\System32\rstrui.exe". That's the .exe which supports the "Create / restore point' processes. I
posted a question about the missing .exe on the windows > windows 8.1 > Repair and recovery forum and was told to post it here. :>) The subject title of that post is "rstrui.exe Create a system restore point on windows server 8 Standard".
That post documents the steps that I followed trying to create a system restore point. (FYI: I'm not trying to backup any drives. I know what a system restore point is and what backup is. They are two different animals). I want to create a restore
point prior in order to prep for installing an App. So, If a problem occurs; the registry keys and app files can be backed out to some extent. BTW: Create system restore point on windows 8.1does work perfectly well, there's a different UI. I just didn't
know where to post the initial problem.regards,Steve -
Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP
Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
MOVED: Driver problems with Windows Professional XP 64bit Edition
This topic has been moved to Operating Systems.
Driver problems with Windows Professional XP 64bit EditionWell, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.
-
I have a problem where Win 8.1 will not hold my restore points even though I have enough space allocated for them. If I set one, I can see it there for a short time and then it just vanishes... any suggestions please
I checked after an hour and they were still there. I checked after another 15 mins and they had gone.
Check your system to confirm that there is no malware.
Run sfc /scannow from an elevated command prompt. Reboot on completion and try now.
You may create another user account with administrative privileges and recheck the issue.
Disable Anti virus application and then create a system restore point.
S.Sengupta, Windows Entertainment and Connected Home MVP -
I have been using the Adobe Digital for years. All of a sudden, I am unable to complete a download
I have been using Adobe Digital for years. All of a sudden , I am unable to complete a download from my library to the Adobe Digital. Can anyone help?
Has anything happened like an update to Digital Editions?
Two possibilities come to mind:
between them they are the answer to a large number of ADE problems, but I can't promise they will help in your case.
Also, a third possibility at the bottom.
1) ~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
2) ~~~~~~~~~
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
3) ~~~~~~~~~~
extension of (2). ADE2.0 will often not work with Overdrive library books if a Sony eReader is plugged in.
It isn't just that it won't interact with the Sony, it won't even operate properly on the book within ADE on the computer.
Maybe you are looking for
-
Autosave form with filename from field
can anyone tell me how to autosave a form (maybe with a button?) where part of the filename is taken from a field in the form? Thanks!
-
Is it possible to flatten just a single field in a document? I sometimes want to hide part of a page and put a button with a white background over the area;flattening it would finish the job.There are often other fields or hyperlinks on the same page
-
Hi Everyone, Would should be the deciding factor to choose between using a CLOB or NCLOB. Thank you
-
Crash db work very very slow and server
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 In the log file at the time that server crash down i found this message *** 2009-02-28 03:03:49.484 *** SERVICE NAME:() 2009-02-28 03:03:49.468 *** SESSION ID:(166.1) 2009-02-28 03:03:49.468 M
-
How to direct connect to Apple TV with ethernet cable
I have been trying all week to connect to AppleTV trying all forms of networked connections. I also tried connecting cat6 ethernet direct to the ATV and 2 computers I have. Both computers have Gigabit ethernet ports so I expected that a connection wo