I have a plot with two cursors - how can I control the "visible" attribute of the second cursor?
I have a waveform graph with multiple plots and two cursors. I can use the "cursor->visible" property to control cursor #1 but I cannot seem to find a way to control the visible attribute for cursor #2. Is there a way to do this?
Thanks,
RGA
There's an "Active Cursor" property that allows you select which cursor the following actions operate on. Remember that property nodes "execute" from top to bottom...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Similar Messages
-
My Firefox is not working (All I get is a blank white screen with the firefox logo. If I have to reinstall Firefox 3.66, how can I transfer my old profile to the new installation?
== This happened ==
Every time Firefox openedDavid. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim
-
hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you
You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum
-
When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil
When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one -
Realtek network card seems to be disappeared. how can i make it visible again for the OS?
i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help
right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego -
I have a basic photography plan. How can I upgrade my storage while keeping the plan?
My name is Joseph Ryan. I currently have a photography plan that's for $10 a month with only 2gb of storage. How can I increase my storage without upgrading the plan?
I shall be assisting you regarding this to increase the storage space, I shall be informing you once completed.
Regards
Rajshree -
How can I control video presentations on opening the browser.
The way I work is to allow all tabs to stay open until I have read them or until I have just too many to manage!!! This means when I reopen the browser I may have 5 or 6 videos which open and begin to chatter. I need to be able to close all videos with one action otherwise I have to go through all tabs until I find the chattering culprits! Sometimes I can't even find all of them and I have an "unknown" chatterer which I can't get rid of. Please tell me if it is possible to control all with one action - without losing the tabs and how to do this. If it is not yet possible may I suggest a modification in the very near future which allows e to do this because it is wasting a lot of time for me when I should be working.
Reply please to [email protected] ...soonest.You don't.
There is no infrared receiver on the iPhone. -
How can I add a custom attribute to the create page dialog?
I followed the following link to add a custom attribute called starred and this attaribute can be displayed in siteadmin grid
http://dev.day.com/docs/en/cq/current/developing/customize_siteadmin.html
I would like to let the user input the value when they create a page. That's why I would like to add a custom field in the input dialog box as attached pic.
The method you describe before can only added those CQ bulid-in attribute.
For those custom attribute, how can I added it?Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
"jcr:primaryType": "cq:Dialog",
"id": CQ.Util.createId("cq-createdialog"),
"title":CQ.I18n.getMessage("Create Page"),
"formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
"params": {
"cmd":"createPage",
"_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit -
my dad just got an ipod touch and we used to share one user name and he wanted his own, now he wants to get his songs from my user to his without using CD's, i want to use the Home Sharing, but when i try to the icon disappears and i don't know how to use it.
With Firefox 23 and TabMixPlus 0.4.1.0 installed, an additional box is added to the Tabs options panel that allows 3 options for the tab bar:
*One is to '''Always''' hide the tab bar. I do not know whether future versions of TabMixPlus will remove that option. I have tested in Firefox 23 and it is possible to completely hide the tab bar regardless of the number of tabs open.
Other options added in the additional box with TabMixPlus 0.4.1.0 are:
*Never
*When I have only one tab -
A friend gave me his laptop computer. His iTunes account pops up when I click the iTunes icon. I have my own account. How do I make MY account be the one that pops up as default?
You either have an incredibly complex computer setup or I think you are confusing terminology here. If you have iTunes set to share your library with others in your iTunes preferences then other computers in the area will see it as an item when they are running their iTunes and have it set to check for shared libraries. Your husband is probably seeing this when running iTunes on his computer. You can disable this sharing on your computer and/or he can set his not to pick up shared libraries.
By the way, an iTunes account is something you log into when you want to buy something from Apple. On your computer it is simply your iTunes collection or your iTunes application. So you need to turn off sharing in your iTunes application preferences.
Your husband is seeing "his" iTunes collection when running iTunes, but it is possible he doesn't have anything in it if it is a brand new computer. -
I have a Canadian billing address. How can I ship an iPhoto product to the US?
My billing address and AppleID are set to Canada, but I would like to ship a photo book to the US. However, I can't change the country in the shipping address edit form. According to iPhoto help: "Customers with a billing address in the U.S. or Canada can have their orders shipped anywhere in the U.S. or Canada".
Any ideas how I can do this? In other questions, people mentioned changing the product store under Preferences>Advanced. I have an old version of iphoto (8.1.2) and I can't seem to find this option.
I'm not physically in Canada, so I can't receive the produce there and then re-mail it....
Any suggestions would be greatly appreciated!Yes. You're iPhoto version, 8.1.2, is too old. You need iPhoto 9 (11) or later to get the Print Product Store option. You will have to have a credit card with a US billing address in order to order thru the US Print Products store and be delivered to the US. Possible you can get a temporary, prepaid credit card at a local bank for this transaction. Call 1-800-MY-APPLE) and ask if that's possible.
-
How can I control a hud interface via the keyboard?
I can nowwhere find a way to control a HUD (heads-up display) via the keyboard
any ideas?
I do not like this at all...
if I remember correctly old fashioned inspectors (like the one in the Finder by option selecting "Get Info") could be controlled via keyboard. Control F6
Those were called "Floating window" and for it a keyboard shortcut could be defined in the Keyboard Preferences...
I couldn't figure out yet how to "focus" a HUD. Well to correct: the HUD in Preview to change the color can be activated by Control F6, but the HUDs in Aperture I couldn't figure out yet
any ideas?
MichaelI figured it out. Just make a full-screen invisible button
and place it on a layer on each frame.
For insatnce, Actions - Button for frame 2:
on (keyPress "<PageDown>") {
gotoAndStop (3);
on (keyPress "<PageUp>") {
gotoAndStop (2);
sends the show forward to frame (slide) 3 with a press of the
remote's "Next" button and sends it back to frame (slide) 1 with a
press of the "Back" button.
I have a Stop action on each frame.
This allows me to control a Flash show just like a Powerpoint
show. Cool. -
How can I control a FLV video using the main play bar (not the FLV skin)?
I need to have the ability to play/pause an FLV video in a slide with the main play bar. Research has shown me that in previous versions, there was a "synchronize with project" checkbox that enabled this. I cannot find this in version 8. Is there a different way of doing this?
Hello ,
Welcome to Adobe Forums
Try inserting the video as Multi-Slide Synchronized Video instead of Event Video ,
Then down below there will be an option to Distribute the video across the slides and you can select from Slide n to n ,(Where n is your slide number).
Hope this will serve your need.
Regards
Himanshu -
I just got a new iphone and we are hooked up to the same apple ID in this family, and his Ipad Have been receiving my texts. How can I fix this?
Welcome to the Apple Community.
You could simply ensure that only the numbers and addresses you wish to use on each device are checked at Settings > Messages > Send & Receive. However this isn’t an ideal solution because the other person can always change these settings from their device and have some fun with you and your contacts.
You’d be far better getting them to delete your account from their device and have them create one of their own. If you are sharing an ID for some other service such as iTunes, you can continue to do so, you only need change the ID for messages. -
My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.
Try rebooting the router. Just remove the power for a few seconds. No settings are lost.
Maybe you are looking for
-
The server was unable to process the request due to an internal error.
Properties set in my project are below namespace EmployeeService public class Employee private int _Id; private string _Name; private string _Gender; private DateTime _DateofBirth;
-
Everytime i try to add a text box the program crashes. Why and how do I fix it?
Since I purchased and installed Adobe Photoshop Elements every time I try to add a text box the program crashes. Why and how do I fix it?
-
Toolbars in the report view take a lot of the screen space as each button takes a line
I created a report which looks fine in the BIDs but as soon as I upload it to the Report server and open it with the IE the toolbars take much of the screen space as each button (Export, Refresh and save) take a line. how can I change the configurati
-
Hi, I am in search of a SAP table consisting of the Transport Request number and having the MANDT field as the first field.My requirement is to create a list consisting of some field with these two fields CLIENT and Transport Request Number.I checked
-
How to turn ON Spotlight in Terminal?
I recently upgraded my Dual 1.8 G5 to Tiger, and followed lots of advice to turn off Spotlight. I did this via the Terminal. well, ive decided that i want it back on, but i dont have the directions to turn it back on, only off via the Terminal. I am