I have a pop up which I can't get rid of which states: "There is no application set to open the URL ximadpzl://save_ximad_token----/"
I can't get rid of a message which keeps popping up which says:
There is no application set to open the URL ximadpzl://save_ximad_token/(etc)
I have no idea to what they are referring and I can find no application which satisfy this requirement. How do I get rid of this message? It won't go away. I have tried turning off the computer, closing Safari, etc.
All of these suggestions (delete caches, restart, terminal commands, etc) do nothing to actually LOCATE the problem. They are just standard purging processes, and they have all failed to achieve resolution. And it is NOT Little Snitch either (tried turning that off and nothing changed). All these forums on this matter have been speculative and useless.
Ladies and Gents... I have found and isolated the ACTUAL PROBLEM. It is a Safari Extension that is doing it... specifically "VideoCatcher 5.3.8" which for me was installed with MovieSherlock. The extension adds the ability to download YouTube movies directly from Safari (by showing a small download button next to any embedded movie). When I remove that extension, all the annoying pop-ups go away.
MovieSherlock is not the only utility that does this however. There are several YouTube downloaders out there that ALL install an extension that detects YouTube videos on the page. I bet my hat that many (if not all) of you who are experiencing this pop-up issue... have installed one of those downloader utilities.
So, the solution is simple: disable that extension. If you need to download a YouTube video from a page, either temporarily enable that extension again as needed, or leave the Safari integration disabled and launch the actual utility itself and enter the URL into it for your download.
I would expect that MovieSherlock and the other YouTube downloading utilities will need to update their extensions (soon?) to deal with Yosemite's new browser script management.
PROBLEM SOLVED.
Similar Messages
-
I am trying to download CS6 to my IMac. The download will almost complete but then it stalls. When I pull up the downloads it is giving me the explanation that "There is no application set to open the document "Photoshop_13_LS16.dmg.part."?
that's a partial download. delete it.
use a different connect (you can transfer to your imac on an usb stick, eg), use a different browser and/or use a download manager.
also,
if you follow all 7 steps you can directly download a trial here: Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.
.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614 -
I have an iPhone 3GS and I can't get it to pair with my iPad 3rd Gen neither will discover the other any suggestions
An iPad and iPhone cannot connect via Bluetooth unless you are trying to use a Personal Hotspot feature on your iPhone or have one of the few third-party apps that allow limited file transfer or device-to-device gaming. Unless you're attempting one of these, then any previous "pairing" was probably illusory. If you are trying to use such a thing, tell us which one and someone may be able to provide suggestions.
Regards. -
Annoying border, which I can't get rid of in an AP div
Hi,
I have created an AP div in Dreamweaver CS4 on my website and it has somehow grown a second compartment. I don't need this second compartment and have tried for the life of me to get rid of it.
Here is the code:
.twoColElsRtHdr #sidebar1 {
float: right;
width: 210px; /* top and bottom padding create visual space within this div */
font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
font-size: small;
top: 15px;
position: relative;
background-color: #FFF;
background-image: url(_assets/sidebarbackg.jpg);
height: 445px;
left: 5px;
color: #000;
text-align: left;
padding-top: 0px;
padding-right: 10px;
padding-bottom: 0px;
padding-left: 10px;
.twoColElsRtHdr #sidebar1 h3, .twoColElsRtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be given to every element that will be placed in the side columns */
margin-right: 10px;
text-align: justify;
font-family: Verdana, Geneva, sans-serif;
The box is the right height and width but there is another compartment in it which I can't get rid of....anyone help?
Tom.Sorry its gone now. No idea what it was but it certainly is part of an AP div which I didn't need.
Thanks -
Hello in trying to restore from backup to my new phone I'm receiving a 'restore failed' message which I can't get rid off to start again. Any ideas please?
Hi there HotFerrari,
It sounds like you are unable to restore your device from a backup you have in iTunes. I recommend the troubleshooting from the article named:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Had to hide by toolbar and now I can't access it. I don't like the Yahoo Toolbar and I can't get rid of it. I've tried RT DBL Click on the open space which only takes me back to Yahoo TB. Can't find anything in the Computer Controls to address this. Any Suggestions??
you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have writing on a photo how can i get rid of it
i have writing on a photo how can i get rid of it
Please show a screen shot. It may be a simple process, or a very complex one, depending upon the specific image, and where the writing is on it.
-
I am running windows xp. as of today, i keep getting uninstall set pop up window. how can i get rid of it? Thanks. jim
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
When I open safari http//yesdateme pops up and I can't get rid of it or continue on into safari
Force Quit Safari, then re-open it while holding the Shift key.
-
Won't let me download Adobe Photoshop Trial version. It said "there is no application to set to open the url...." Can't find what app to use?
use a different browser to download.
-
HP D017TU Laptop - Windows Help ans Support window started popping up and i can't get ride of it
Just purchased a brand new HP D017TU Laptop so nothing been done with it. I installed windows 7 on my HP D017TU laptop. it was working fine.
Then 2 days ago the Windows Help ans Support window started popping up and now I can't get ride of it.
I have tried the following things to get ride of the issue,
1) Format windows 7 os
2) Delete All partition and re-create
3) Re-install windows 7
Does anyone know how I can stop this happening.Hello SaravSB, welcome to teh HP Forums.
I see that you're having an issue where the Windows help and support is popping up. I will try to help you with this.
I've looked into this for you, it seems this was an issue from back when Windows 7 launched. Any "solutions" also seemed to vary user to user. You may want to try contacting Microsoft for support on this. I was able to find a couple of posts off the answers.microsoft.com forums.
"SuperJbye replied on July 14, 2013
Hello
I found a simple yet effective solution for this problem, my friend had the same issue so instinctively as a technician, I suspect this was a malware of somekind so I re-formatted and installed Win7 funny it's still there, so I did a Hard disk wipe using Dalvik's and re-partitioned and formatted again, to my surprise it still have the same problem.
So I ask Mr. Goo' old Mr. Google for answer, but I've found more complications, sorry for the story, so without further a do, the solution.
Boot to safe mode. (may also work in "normal mode")
Go to Task Manager>
Click the Services Tab>
Right click "HelpPane.exe" or Help and support service>
Select Properties>
Click the Security tab>
Click the Advanced tab (for permissions options)
Then select the "permissions entries" one at a time>
Click Change Permissions>
Then click Edit>
CLEAR ALL THE CHECK BOX FOR ALL ENTRIES
This should prevent access to the HelpPane.exe to all users/programs.
This resolved my friends Windows 7 "Help and Support thingy" issue, hope it does yours too.
Message me for questions and/or clarifications/corrections.
Thank you"
"EddJosh replied on April 29, 2014
In reply to Danel...'s post on April 28, 2014
To fix the problem of the help pane appearing everytime you start windows do the following:
1. Run 'msconfig'
2. Go to the 'Startup' tab
3. One of your 'Startup items' is causing the pane to appear and you are going to have to find out which one it is! Untick ALL the items and reboot. The help pane will not appear harrah! Rather than adding the Startup Items back in one at a time and rebooting a hundred times, tick half the programs back in and reboot. You can find the culprit in about 5 reboots if you do it logically and add/remove half/quarter etc at a time.
4. Finally you will be left with all your Startup items ticked and the guilty program unticked (and that annoying help pane will no longer be appearing)
5. Now delete the guilty Startup Item from the registry (which will also remove it from the msconfig startup tab.
6. Open 'regedit'
7. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\MSConfig\startupreg and delete the guilty program folder. BACKUP YOUR REGISTRY FIRST!
8. You're welcome."
Both of those, as well as other steps are located in this thread: Windows 7 "Help and Support" keeps popping up.
You could try those suggestions and even give that thread a read over, other wise the best option would be contacting Microsoft as stated above.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
How can I get rid of MacKeeper which downloads everytime I go online?
MacKeeper is a bit more pervasive than the unistaller.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/ -
I got some pictures from my PC onto my iPad and now can't get rid of them.
gdxn wrote:
I have taken all my photos off the PC and delegated all the pictures I can from the iPad and did a sync and the photo album that I want rid of is still on my iPad.
You don't take the pictures off the PC you leave them there and tell iTunes that you don't want them on the iPad (by unchecking them) and then sync. That will delete the pictures from the iPad. -
I have just updated the operating system on my ipad2 to iso7. Big mistake. It is ugly and unpleasant to use, and the Safari element comes loaded with icons I will not be using, but can't seem to get rid of. Does anybody know how to change the operating system back to the previous one?
Thanks.Firstly, the icons when you load safari are your bookmarks in the favourite section. To remove them you can simply either delete them or move them to another bookmark folder. To access your bookmarks tap the blue book in the top right corner and then go through to bookmarks and select and edit from there, goodluck :)
Maybe you are looking for
-
Error while posting the parked document in ECC 6.0
Hello ABAPers, After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT". Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding ta
-
Status bar in BUSY mode while displaying bean calendar
Hi all Iam using 10g Forms running from 10gAS. We are using Java Bean Calendar for date picking. As bean components run from the client's applet, i suppose calling a calendar bean should not have any server communication. But while i call the calenda
-
Two annoying bugs when exiting guided acces via Touch ID
When exiting guided access on my iPad Air 2 (iOS 8.1.3) via Touch ID, I encounter the following strange behavior: 1. the disabled areas I defined in the guided access mode (the "greyed-out" areas where touch input is not accepted) remain as grey area
-
I am unable to activate my iphone 3gs after updating ios 6.1.3
i am unable to activate my iphone 3gs after updating ios 6.1.3?
-
Sculpture waveshaper in the editor?
I'm using Logic Pro X; in Sculpture, the only way I can turn the Waveshaper on or off is from the Controls screen, not the Editor screen. Has anyone else encountered this?