I have a portable camera that when I turn I plug it in to my Mac Mini, nothing happens and it says I don't have a camera hooked up.  How do I fix it?

I have a portable camera that when I turn I plug it in to my Mac Mini, nothing happens and it says I don't have a camera hooked up.  How do I fix it?

Here is Apple's support article for troubleshooting a camera that is not recognized by iPhoto:
iPhoto: Troubleshooting Camera Connections - Apple Support
Cheers,
GB

Similar Messages

  • When I try to download any application from I tune it ask to accept the new terms and condition of itune.and when I accept it it again opens the I tune but nothing happens and iPad returns back to home screen

    When I try to download any application from I tune it ask to accept the new terms and condition of itune.and when I accept it it again opens the I tune but nothing happens and iPad returns back to home screen.plz help me

    Try resetting your iPad and start again, sometime that clears the problem

  • I'm trying to purchase extra content on some of my apps and it says "contact iTunes support to complete this transaction." how can I fix this? My credit card is valid and I've made extra content purchases before and it's worked.

    I'm trying to purchase extra content on some of my apps and it says "contact iTunes support to complete this transaction." how can I fix this? My credit card is valid and I've made extra content purchases before and it's worked.

    As I replied in your duplicate thread, these are user-to-user forums, you are not talking to Apple here.
    You can contact iTunes support via this page :http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption

  • When i try to update my iphone 4 to the iso5 software i can an error whic backing up the iphone(-50) and it say if i contunue ill loose all my contacts how can i fix this??

    when i try to update my iphone to the new iso5 software i get a error message(-50) while backing up it says if i continue ill loose all my contacts how can i fix this??

    Have you tried this?

  • Tries to load a page from site but never loads, Then need to close Mozilla and reopen it. Told that it is already running, not, then often have to do a hard turn off to shut it down. Why is this happening, and what can be done?

    This happened many times today. There is no specific page. I usually have a page open and try to redirect from that page. It shows "connecting", but never does. I have run many scans which all turn up clean. Why is this happening and what can be done to fix it?

    Maybe here:
    http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
    Is the iPod jailbroken?

  • I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

    I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time... 
    Thanks for any help.

    I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
    This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
    The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
    There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
    If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
    Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
    Are you talking about files you are hosting on the TC?? Not Time Machine backups??
    Can you tell me exactly how you are accessing the TC.. please do a test..
    Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
    Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
    Do the same test from the same computer with wireless turned off running ethernet.
    Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
    I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
    eg
    Now do the test from the HP laptop and give me the results from that.
    Is the issue wireless only.. ??
    Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
    About Wireless Diagnostics

  • When I turn on my TV/AV receiver my Mac mini goes to sleep!?

    This issue occurs regardless of whether the Mac Mini is in sleep mode or awake...
    I have my Mac Mini connected to my HDTV, therefore I connect using an iPad as a remote.
    When I turn on the TV and receiver (Onkyo), the Mac Mini will go in to sleep mode, even after showing the desktop with no problem (moments later it will turn off). This makes it very hard to wake up using any iPad apps, because even using wake on LAN functions these seem to have little effect. On some occasions I can use wake on LAN and this works, however most of the time this is unsuccessful. If the Mac Mini is already in sleep mode, I will of course have the same problems.
    My main issue is that this is only started happening since upgrading to mountain lion and there was no problem before using lion.
    Is anyone experiencing these issues and/or have any suggestions?

    Try restarting you computer by holding down the option key, this should give you the option to select your startup volume, select Macintosh HD. 

  • When I open Add-ons Manager and go to Get Add-ons the screen just sits at the spinning loading icon. Also when I do a search all addons it will give the same icon and if I go to my addons it is blank. How do I fix this?

    It seems I am no longer able to access addons from within the browser.

    From the Firefox help files;<BR><BR>
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

  • I downloaded the new update ios7.0.6 on my ipod touch 5g and all is says on the screen is connect to itunes so i did and it told me to update and restore so i did but nothing happened all it says is waitung for ipod. I dont know how to fix it!!

    Help please!!!!

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • One day it just stopped focusing and the pictures are blurry.  If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?

    i installed ios 7.after  that my primary cam, one day it just stopped focusing and the pictures are blurry.  If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?

    This advice will sound like a joke or prank, but believe me it worked on my iPhone 5 and my daughter's.  The lens mechanism got stock on each of our iPhones.  We found a post on these message boards that said to hold the iPhone about 6 inches above a table or counter top and drop it so that it lands flat on it's back.  Now try the camera ...Fixed!  It has been more than six months now and neither of our iPhones have ever experienced the problem again. 

  • TS1365 I have a mac pro that when i turn it on the sleep light blinks and makes a beeping sound but my screen is black. Any idea's as to why this is happening and how do i fix it?

    I have a mac pro that when i turn it on i get a black screen and the "sleep light" is on but i also get a beeping sound. How do i fix this? I have powered off turned it back on and tried the command, option, P, and R and still nothing

    Welcome to the Apple Support Communities
    How many beeps do you hear?

  • When I close Firefox and then come back to it layer a box comes up that says it's already running. It ays to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firef

    When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
    == This happened ==
    Every time Firefox opened
    == a couple of months ago

    Hello Brian.
    You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
    http://support.mozilla.com/en-US/kb/Firefox+hangs
    What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?

    When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
    it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.

    Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings.  Be sure to turn it off.
    You are confusing an itunes store account with an icloud account.  You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/
    Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account.  (have restrictions turned off)  That will disconnect the device from the account but will not delete data in icloud or other devices.  Then sign in using the new ID.

  • I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
    Be sure it indicates 11.1.3.
    If it is, here's further troubleshooting:
    http://support.apple.com/kb/TS1538

  • Hello! I purchased a month package on Lightroom and Photoshop adobe a few months ago. The problem is that when I took this contract in a year, so, my computer broke down and I have not been downloaded programs. Now I have bought a new computer but how do

    Hello! I purchased a month package on Lightroom and Photoshop adobe a few months ago. The problem is that when I took this contract in a year, so, my computer broke down and I have not been downloaded programs. Now I have bought a new computer but how do I get access to desssa two programs.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for

  • Header data in ALV

    Hi, I've got a requirement, wherein I need to display a few fields of the ALV page, as the header data, and the remaining as line items. How do I do.  I'm able to get all the data fields to a ALV report, how do I go?? Please help me. Thank you, in Ad

  • HKEY_LOCAL_MACHINE\software\ etc. problem solved

    I have been trying to upgrade to itunes 7.0 since October. I have been all over this forum and others looking for the solutiuon to that annoying message. I know I am not the only one. I have tried regit, jacked around with permissions, and tried ever

  • What version of photoshop can i use on mac osx 10.8.3

    what version of photoshop can i use on mac osx 10.8.3

  • Install CS6 on mac

    Hello, i am having a hard time installing PS6 on my Mac. Any suggestions? Do i need a certain app?

  • Display only top 10 Customers

    Hi, I have report showing the customer name and Shipped Quantity in the table view, i want to display only top 10 customers by Shipped Quantity, how i can do....? Thanks