I have a Power Shot SD4500 IS and after battery is fully charged battery runs down without any use.

I have a Power Shot SD4500 IS and after charging battery then placing in camera and within a day the battery is dead. I have tried replacing with a new battery and have the same problem. Any suggestions?
The last time (2 years ago) I had a problem with my previous ELPH I was told it was less expensive to replace the camera than to repair, but after buying 2 in 5 years with limited use, this is getting old.
HELP

Pharmboy007,
I would like to ask a couple questions to see if I can determine what is causing the issue.
How long is the camera sitting before you are using it and finding out that the battery is no longer charged?
Does this happen with other batteries, or just the one battery?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Why does my A55 camera shut off after only a few shots, and the battery is fully charged?

I have a 3 year old A55 camera. It has performed without problems, until now. When I use a fully charged battery, the camera will shut down after about 10 shots. It will not power back up until I put in another fully charged battery. My extended warranty expired in March, but I would think that Sony should fix this known issue, because I see it as a rampant problem (from my research online). The camera has never been dropped or damaged. Can you provide me with solutions? Thanks,David Carlos425 773 2584

Unlike the rest of Sony's A-Mount cameras, the A55 and A33 used the relatively anemic NP-FW50, the same battery used in all Sony's E-Mount bodies. I think that it's probable that, as all rechargeable batteries will do, yours have reached the end of their useful lives, and can't hold a charge. Have you tried a new battery?

I have a power shot sx 40 & need to know : when up magnify a pic how do you save it on your camera ?

I have a power shot 40 & I learned how to zoom in/maginfy a pic but i can't figure out how to save the maginfied image.
Thanks ~
Solved!
Go to Solution.

Im not sure what you mean but if you mean when you zoom in on a photo in playback mode there is a way to save the zoomed area seperately from the original photo on the camera.
To begin select Trimming on the Playback menu.
Use the Zoom lever to resize the frame and you can press points on the Control Dial to move the frame around also.
You can also press the Disp to change the orientation.
When you are finished press Set and it will ask to Save New Image, select Ok.
Press Menu and when your promtped to Display New Image select Yes or No.
You might want to consider a book written specifically for your SX40. I own the SX50 and bought that book because much of it still applies. It is called A Short Course in Canon Powershot SX40 HS Photography written by Dennis P. Curtin.
The procedure I just told you came from that book which is clearer than how I would have decribed it mysef

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
On your new MacBook Pro open "Migration Assistant" in your utilities folder.
Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

TS3938 I have a power pc processor g5 and cannot load adobe flashplayer. Anyone know how?

I have a power PC processor g5 and cannot load adobe flashplayer. Does anyone know how?

You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

HT1752 I have a Power PC G4 tower and start up is not going to OS, I'm getting a question mark in a folder icon. What do I do?

I have a Power PC G4 tower and start up is not going to OS, I'm getting a question mark in a folder icon. What do I do?

Is OS X installed?
Try a Startup Manager boot. Hold Option while starting.
Try a Safe Mode boot. Hold Shift while starting.
A flashing question mark appears when you start your Mac
If the PRAM battery is old, the system can lose it's mind.
Reset the PRAM.
resetting the PRAM - Support - Apple

I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on.

I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing

iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result

TS4062 I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Opt

I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer using the same USB cable, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Apple Store Geniuses helped me determine that it wasn't my iPad causing the problem, but were less helpful when it came to dealing with non-Apple devices.
Options?

Does the OS see the iPad at all? In other words does it show up in either the My Computer or Device Manager?
I've had problems in the past where I had to modify the registry to get my son's iPod to sync with a particular HP laptop.
If it doesn't show up at all have your tried using an external hub (with or without power)?

When my battery is fully charged and i remove the power lead the computer shuts down

When my battery is fully charged and i remove the power lead the computer shuts down, evan when the power lights are fully green on the charger and the battery pack indercating lights.
Regards

I have exactly the same problem, which started again yesterday; coincidentally the day my warranty ran out!
The situation is complicated for me because I live in rural lincolnshire, but was in London all summer and had a new logic board replaced under warranty last month at the London- Stratford store.
It seems the £400 logic board replacement didn't fix it. When I try to get support, the website just laughs at me and holds out the cup for more money. I had a chat with somebody in the store this evening and I've got to take it into a store AGAIN!
Perusal of the 'Support' pages turns up literally thousands of people who have this or similar faults, all the way back to 2006, and I've not seen anything yet indicating that Apple have got a grip of it.
I've been using Apple kit for 16 years now and I've never had any trouble until now, but this bloody laptop, which is no better than my iMac now for portability has let me down badly several times in the last 6 weeks.
I'm really hacked off with this, get your **** together Apple!

IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. Please help

IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. I did restore the iPad about 8 times during the past 2 weeks. Just completed another restore. iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready. That was 30 minutes ago. iPad still won't start. I am looking down the barrel of yet another fruitless restore. What a crap product.

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]

Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products

Just bought an iPhone 5s, as I turned on the phone it showed 71% of battery, I drained it to 15% and next charged it for 3 and a half hours to fully charged. Did I do any mistake ? Should have I let it to get discharged in order to fully charge it ?

Just bought an iPhone 5s, as I turned on the phone it showed 71% of battery, I drained it to 15% and next charged it for 3 and a half hours to fully charge. Did I do any mistake ? Should have I let it to get discharged in order to fully charge it ? Somebody told me I should have let it discharged and then to fully charge, but I didn't do it, my iphone is working very well, the battery too but I'm worried if the battery lifespan is gonna get worsen soon if I didn't abide by the rules and procedures of battery charging.
I had problems on my previous iPhone 4s, it died because I didn't replaced the battery with a new one because my battery never worked well and I never knew it , the battery used to overheat my iPhone and it caused to damage my processor completely to death. Who does the replacement of the iphone processor? I need help how to maintain with the iphone battery. And also let me know if I did something wrong that I should get worried about or not ?!?!

Apple does not fix the iPhone 4S, they replace the phone. If not covered by warranty, called an out of warranty exchange. Cost is US $199. Make an appointment at any Apple store.
Be aware, Apple does not sell iPhone parts, thus there is no legitimate source for genuine parts.

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

I have a Power Shot SD4500 IS and after battery is fully charged battery runs down without any use.

Similar Messages

Maybe you are looking for