I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion?
I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion? On the Apple's site on upgrading (http://www.apple.com/osx/how-to-upgrade/), I see that "Mac Pro (Early 2008 or newer)" is required for the upgrade. What's up with that?
Will upgrading of the GPU do the trick?
I'm curretly on Snow Leopard, will I be limited to Lion?
Kamal
my system info:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 13 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): xxxxxxxxxxxxxxxxxxxxxx
Hardware UUID: 00000000-0000-1000-8000-00xxxxxxxx
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
I have the following Mac Pro which I have upgraded the GPU to an ATI Radeon HD 5770:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 8 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): G86334VTUPZ
Hardware UUID: 00000000-0000-1000-8000-0017F20153D2
Mountain Lion won't install.
Will this change or do I need to further upgrade the GPU.
Thanks In Advance!
--Dave K.
Similar Messages
-
Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
RobertWhen you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?
It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work. -
I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
Thanks,
KevinI recommend you install nothing older than the Apple-firware 5770, about US$250.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards" -
I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?
RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384 -
I have a dual core mac pro tower , can I upgrade to lion from snow leopard?
I have a dual core mac pro tower , can I upgrade to lion from snow leopard?
The 2006 and 2007 Mac Pros can be upgraded as far as Lion. Mountain Lion can be installed on Mac Pros from 2008 onward. See below:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I have a macbook pro with OSX 10.5.8. How do I upgrade to Mountain Lion when it is available? I need to upgrade to run quickbooks and other apps
First, you need Snow Leopard (10.6): http://store.apple.com/us/product/MC573Z/A. Then you use Software Update to update it to 10.6.8. When Mountain Lion (10.8) comes out, find it in the Mac App Store.
-
HT4972 I no longer have a PC or Mac. How can I upgrade to iOS 5?
I no longer have a PC or Mac. How can I upgrade to iOS 5?
Your iPhone can be updated to the latest firmware in an Apple Store but you would lose all the information off your phone.
If your happy to do this, may I recommend backing up to iCloud once you are on iOS 5.1.1 and then you will be able to perform future upgrades over wifi and restore your phone from your iCloud account should you ever need to in the future.
The other option might be to back your iPhone upto a friends computer without syncing and this might be the only way you could restore everything back onto your updated phone.
Also download apps to back up your contacts online so that you can restore them also after the update.
May I suggest Contacts Backup app which enables you to back up your contacts by email, Dropbox or via USB.
Hope this helps. -
Downloading mountain lion damaged my hard disc. I took my Mac Pro to apple store. They are unable to repair it and suggest I purchase a new hard disc for $160. It was a perfectly functioning Mac Pro that got damaged by downloading mountain lion.
Software upgrades do not generally damage hardware; your drive's failure must be co-incidental. On most MBP's, a hard drive is very easily replaced by a user. You might want to check out this site for both hard drives as well as install videos (check which model you have so you can check the correct video):
http://eshop.macsales.com/installvideos/
hard drives:
http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
I just recently upgraded my MBP with an SSD; I purchased an kit with an external enclosure from OWC and cloned the current drive to the new one, installed the new drive and was done in no time. -
I have a Power Book SW version 10.5.8. How can I upgrade to Mountain Lion?
Hello,
I have a Power Book SW version 10.5.8. How can I upgrade to Mountain Lion? I need to be able to download some graphics apps from the Mac store and I do not have that capability with 10.5.8.
I am American but live in Italy so have missed an update or two. When I went to the Mac store in the States this summer they told me if I could work well with this outdated version, to leave as is as I had missed two updates. Now I need to I need to be able to download some graphics apps from the Mac store and I do not have that capability with 10.5.8. I need at least 6.6.0 it says.
Thank you,
Deborahhttp://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Make sure your machine supports Snow Leopard requirements. The same with Mountain Lion if you want to move even further up the animal kingdom. -
Ive just recently bought the new mac book, how do i upgarde to mountain lion for free?
ive just recently bought the new mac book, how do i upgarde to mountain lion for free?
See below.
http://www.apple.com/ca/osx/uptodate/ -
Why do i have to keep Force quitting applications ever since i upgraded to Mountain lion. It is very annoying when applications cannot be existed normally.
Does your system meet these Mountain Lion System Requirements?:
General Requirements
OS X v10.6.8 or later
2GB of memory
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
And as user macsonrisanoted above, 4 GB of RAM is the practical minimum amount of RAM that Mountain Lion really needs since the OS itself uses at least that much often by itself. -
My MacBook Pro mid 2010 was upgraded to mountain lion os x and then my wifi started saying no hardware installed
Hello Harrisonhcue,
I would be concerned too if I was getting the message "no hardware installed" when trying to use Wi-Fi on my MacBook Pro. For a message like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You can find the full article here:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have a 10.6.8 OS and want to upgrade to Mountain Lion but when I try the applications tells me my computer can't support it. What does that mean. I have upgraded to Snow Leopard and was told (by Mac Store) that after that I would be able to update to Mountain Lion.
Welcome to Apple Support Communities
You need 10.6.8 to upgrade to Mountain Lion, but it doesn't mean that your computer is compatible. Mountain Lion is compatible with Late 2008 Aluminum or Early 2009 MacBooks. If you have an older one, you can't upgrade to Mountain Lion. Read > http://www.apple.com/osx/specs
If you can't upgrade to Mountain Lion, open > About this Mac, and tell me what processor and memory you have got. If you have a Intel Core 2 Duo or newer processor, you can upgrade to Lion. Call Apple to purchase Lion > http://support.apple.com/kb/HE57 Make a backup of your files before upgrading and check that your apps are compatible > http://www.roaringapps.com -
HT4461 how do i upgrade to mountain lion os?
how do i upgrade to mountain lion os?
Your Mac must be running Snow Leopard version 10.6.8 to get the App Store so that you can download and install Mountain Lion.
Allan
Maybe you are looking for
-
[SOLVED] Beginners' Guide stumped on pacman -Syyu curl
I'm a total green noob on Arch and am going through the Beginners' Guide. I'm on the section about rankmirrors and am at pacman -Syyu curl and am getting the following: Is this normal? Is this the part where I continue to edit my mirrorlist and comme
-
I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to
-
CM13 Report and Form Templates Error
hi im trying to use the default form and template installed in ..\oracle\contract management\forms and ..\oracle\contract management\Report. under sever configuration the path was mentioned correctly and i already import through the button Import Rep
-
In IDCS2, is there a way of using a style to change case of a piece of text, or would this have to be done by scripting? Anyone know, please ? Bran
-
Conversion of organizations to contact persons in the segmentation model
Hi Folks, I want to do Conversion of organizations to contact persons in the segmentation model.But I don't see context menu of the target group in graphical modeling which is Follow Up Convert Organizations to Contact Persons.Can you guys suggest h