I have a printer j4680

please I own an hp laptop with vista 64 bit and I order a new laptop hp with win 7 can i use the wireless printer on both laptop

What program are you printing from? What operating system?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue. You may have a partially printed document in the queue that needs to be restarted.
The pages here may help as well, select either the Windows or Mac troubleshooting pages.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Does HP Deskjet 1510 have e-print?

Does HP Deskjet 1510 have e-print?

Hi,
No, it only has USB connection:
http://www8.hp.com/au/en/products/printers/product-detail.html?oid=5285093#!tab=specs
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Can we have a "print button" to print massive report document ?

Hi there,
Can we have a "print button" to print a massive report document (e.g 3000 page , each for a specific customer description), instead of exporting to pdf or excell before printing.. ?
Thanks
-toni

You cannot have a print Button in the report, But have you tried Scheduling the report, and setting the output to printer? That might meet your requirement. You can also use the schedule section to run it immediately (once)
-Domnic

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

I have edited photos in i-photo and would like to have them printed. How do i burn them to disc in a format that a windows PC system can read. I am in India and this is definitely "microsoft" country! thanks for taking the time to guide me.

I have edited photos in i-photo and would like to have them printed at any photo development lab. I am in India and this is definitely "microsoft" country !
Please advise me how to burn these edited photos to a disc to take to the nearest printing store in a format that "windows" system can understand.
Thanks in advance. I look forward to learning about this.

Select the pics in the viPhoto Window and go File -> Export and export them to a folder on the desktop. Burn that to disk with the Finder's burn command. Result. A disk with a folder of images that any machine can understand.
Regards
TD

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

Can't print off my statements like before...have to print one page at a time instead of whole statement...what gives? did up dates ...updates no good?

Can't print off my statements like I did before...have to print one page at a time now...what happened? never had proble before....I did an update that they said was available...did that cause the problem...Apple???

Hi Charlott...
Open System Preferences > Print & Scan then select the Print tab.
Click: Open Print Queue...
Delete all documents in the queue
Restart your Mac, turn off the printer then turn it back on then try printing.
Not sure which update you are referring to. If you have Lion installed and updated to v10.7.3, I doubt that had any effect on printing.
BTW... when you post, please tell us which Mac OS X you have installed. Thanks!

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer

Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
Thanks!!

you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release. Then wait for the phone to boot back up. You won't lose any data.

How to have Windows Print prompt pop up when printing SBO documents

Version 8.8 SP00 PL14
I have SBO Print Preferences for Sales Order and AR Invoice set to NOT Print on Add.
I have PLD layouts with defined printers assigned to users.
I want the user to be able to change the defined printer when printing a document.
I don't want the user to have to select a different PLD layout.
When the user prints a document SBO is sending the document straight to the defined printer without popping the Windows Print screen that would allow the defaulting printer to be changed.
Is there any way to make the Windows Print screen pop up?

Hi Tony,
I noticed too that when you now click on 'Print', the windows print window no longer comes up.
Did you set the PLD template default by user and indicate in Print Layout Manager the correct printer for that layout? (i.e. looks like you need a layout for each printer if the printer is different by user unless the printer to be used is the user's default printer.)
Heather

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. H

Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.

I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.

I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
with OpenOffice in the future regarding that.

I have a printer j4680

Similar Messages

Maybe you are looking for