I have a probably & i am not sure where to go about it......
Well, a few weeks ago my earphones started to mess up(i don't use the apple ones. lost them) so i assumed that it was the earphones and bought new ones. well, they did the same thing. and so did two other pairs that i put in, so i know its the ipod messing up and not the earphones. I have had my ipod for about a year exactly. I use it pretty much everyday. so i am wandering if anyone knows whats going on with it for has the same probabem. The right ear had completly stopped working in all earphones that i put in. can anyone help?
My first question would be whether or not your absolutely positive the ipod is "killing off" your headphones. Do they stop working on everything - have you tried plugging the headphones into something else after they stop working with the ipod?
If the headphones don't work with another source then it's not a problem with the ipod, it's with the headphons (yes, I realize that sounds way out there but there's no other explanation).
If the headphones do work with another source then there could be a few causes:
1. The ipod is resetting itself - that happens sometimes if you get a case for it that holds down the center or menu button too long, resetting the pod.
2. The firmware on your ipod needs updated - connect it and see if you can get an update from apple.
3. A short in the headphone jack - then the pod is shot, you'll have to replace it
4. The pod could need to be reset - http://docs.info.apple.com/article.html?artnum=61705
I'd look at all these sources first. Hopefully it's just a glitch with the particular headphones you're buying.
Similar Messages
-
Aperture. I have so many pictures and not sure where to put them now that my MacBook Pro is filled?
I have so many pictures on my Mac book pro on aperture that I can not put anymore on. If I put them on a hard drive h
Then how do I access them like a library?Aperture allows you to store your Images' Originals on any directly connected drive (must be formatted "Mac OS Extended, Journaled"), and gives you the option and the ability to move your Originals any time you want.
So get an external drive, format it correctly, select the Images whose Originals you want to move to that external drive, and move them using the command "File➞Relocate Originals".
An Image's Original must be on-line in order for you to be able to make adjustments, export, or print that Image. When the Original is off-line, you are still able to change the metadata, and view and share the Image's Preview.
If you are uncertain about the parts of Aperture, my User Tip is as good a place to start as I know .
Here is the topic as covered in the well-done Users Manual. Note that the User Manual uses the terms "Master" and "Original" synonymously, and that it confuses users by refering to referenced and managed _Images_. Image's are not, themselves, referenced or managed. The Original of each Image is a file (the one you imported); that file is the item that is either referenced or managed.
What Are Managed Images and Referenced Images?
Scroll down the linked page.
Relocating Referenced Masters
HTH,
--Kirby.
Message was edited by: Kirby Krieger — added in attempt to clarify. -
I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it
Move your content to a new Mac - Apple Support
-
PLEASE HELP
I have recently updated my macs software then been onto Photo Booth and realised that all of my pictures/videos have been deleted and are not in iPhoto? Im not sure where they have all gone?Photobooth and iPhoto are two quite different apps with no connection between them. I'd try the Using Mac OS X forum for whatever version of the OS you have.
-
I bought my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting and/ or clean-up. I have moderate computer skills and try not to download or access questionable material, however recently I visited the Ap Store and purchased a couple of different aps to use in record keeping and for making a flyer. I am not even sure how to remove these programs to see if it helps.
Any tips or tricks are appreciated.
Thank you!Time to see about the PRAM battery.
By the way iOS and OS X are different systems.
iOS is the operating system for iPads, iPhones, and iPod touch.
Mac OS X is the operating system for Mac labelled computers. -
I am having trouble installing photoshop Lightroom. The program is installed and has some sections blocked off. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.
If you have a serial number, you simply need to enter it into the proper fields.
Since you don't say what version of Lightroom, and what sections are "blocked off", let me guess that you have Lightroom CC, and you need to enter the serial number to turn it into Lightroom 6. Here are the instructions: Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
And if that's not the right assumption, then please give us the details. -
I am trying to update my Final Cut Pro X which I have done many times before.
Why am I getting this message now?
--- here's the message I keep getting every time I try to download the update--
"To update this application sign into the account you used to purchase it"
I am signed in with the account that I purchased it I don't have another account I'm not sure what's going onOpen up iTunes. Go to Store. Go to Account and sign in. Click on Purchase History. Find your purchase record.
Good luck
Russ -
Trying to re-install Acrobat 8 and it's saying I need Internet Explorer 4.0 or greater installed. I have IE 11 installed so not sure why I'm getting that message.
Acrobat 8 needs IE 6.0 not 4.0
1) Try installing using MSI file instead of setup.exe.
2) Enable MSI logging and provide the MSI log. Steps to enable MSI logging can be found here http://support.microsoft.com/en-us/kb/223300
3) What is the version of shdocvw.dll in "C:\Windows\System32" folder and in "C:\Windows\SysWOW64" (exists only on a 64 bit machine) folder. -
i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.
Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
I am not sure where to put this but I would like individual tones for all my email accounts
Wonderful suggestion.
You can give Apple feedback here > http://www.apple.com/feedback/
Hop that helps -
Please can you advise how to disable the SSL on my iphone, i am not sure where the setting is.
Thanks
TaniaGo to Settings/Mail, Contacts, Calendars. Tap the name of the email account. If you don't see a bar labeled "Advance" near the bottom, Tap Account. Tap Advanced. Under Incoming Settings, there should be an option to Use SSL. If it is ON, tap it to turn it off.
-
I cancelled a payment through PayPal. How do I update the payment for that charge? I looked at my payment information and it has my credit card information. I'm not sure where to update the payment that was associated with my PayPal account? I am not sure what that paid for? I am trying to process updates on my IPhone & IPad for apps. I have already downloaded.
Hi Xellana, and a warm welcome to the forums!
I'm looking for information and pricing on possibly upgrading the processor from the PowerPC to Intel.
While anything is possible if you had enough money... NOPE, you can't change the CPUs to Intel, nor can you get any faster PPC upgrades for it. It'd be far cheaper to buy a new IntelMac than to replace everything inside the G5, and I mean just about everything, then figure out how to machine the case & such to mount Intel Logic Board, Graphic Card & such.
Sorry. -
External hard drive, sharing, itunes? Not sure where to post this?
sorry guys but i'm not sure where this belongs, but anyway. I just bought my macbook and purchased a Western Digital harddrive ( external ) anyway I have like 80gigs of pics and music and want to get it from my iPod back onto the computer. Not a problem............My problem is that I can't put it directly onto the external drive I first need to put it on the macbook then transfer it to the externak hardrive. When I do this is winds up on my mac HD and also on my external hardrive. I only want it in one place. Ok, my ultimate goal right now is to buy an iMac which I'm doing this weekend. Got rid of my PC's ( Go Apple !) LOL. I want to put all my music ,videos,pics, movies on the external hardrive and be able to share it with both my Macbook and my imac. I simply want to be able to access my everything from both pc's but get it all from the EHD. Right now it's all on my macbook and I want to free up the space, plus learn how to do it for the future. Sorry to ramble. So far I've posted a few times and someone always comes through. Everyone here is awesome, it's like another planet compared to the PC world.
thanks
Mike , NYC
macbook Mac OS X (10.4.9) HP DesktopPut your iTunes folder on the eternal hard drive, and make a alias to it from your home directory on the MacBook (Cmd-L). Do the same when you get the iMac.
I didn't quite get how the two computers are sharing the hard drive, or maybe you'll put the hard drive on the iMac and share the library. There's a lot of ways to make this work. You made a good decision. -
I am trying to get my vi to trigger, not sure where to add the trigger
I need a vi that can trigger using an analog rising edge (1V), then produces a square wave (any square wave will do for now), and then show the measurement of the waveform. Attached is the code that I have made so far. Not sure how to get a trigger attached, or where to place the trigger, onto what I have done so far. Another question is where to have it triggered from, do I need to add another generate waveform to produce the trigger signal?
Any help is appreciated!!
-ncm
Solved!
Go to Solution.
Attachments:
Generate and Read Waveform.vi 39 KBHi,
You can place a DAQmx start trigger VI in the code at the top, between the DAQmx Timing and DAQmx write VIs, and then set the trigger type to "Analog Edge" and specify the channel to trigger from (in this case I think you would use the APFI line on your card). Check out the 'Voltage - Continuous Output' Example' if you need help implementing this in code, that example covers analog output with different types of triggering in a setup similar to yours.
Matt Lee
National Instruments
Applications Engineer -
Tar problem - Not sure where to ask
This is my post in this forum & I'm not sure where to post this.
I have just installed Arch in my office system 2 days ago. I was extracting tomcat 5.0.28 official tar.gz in my arch system and it gave this error:
tar: A lone zero block at 82109
The tar version in my system is
tar (GNU tar) 1.15.1
I extracted the same archive in our server where the tar version is:
tar (GNU tar) 1.13.25
and it gave no error
The error/not error is same with either -x or -t flag.
Is it a bug in the new version of tar (I think so, arch should have nothing special about it).
What should I do can anybody suggest?Yes the size does match, so I think the content may be OK.
Last time I found the directory size mismatch using du -s
but I guess its because the two directory was in two different fs
in server it was xfs, in my home it was ext3.
By the way is there any way to verfiy equivalency of two directories. I know
of md5sum but that works file by file.
Thanks.
Maybe you are looking for
-
I am continually knocked off of draw something while trying to play. I also have a game that when they sent it back to me, it was frozen at the point where it shows them guessing my drawing. It lets me watch my drawing but shows the wrong letters ava
-
Unable to save a completed from in Chrome
I have a PDF form that I can open from the web page in IE and save the form and the data. I try that in Chrome and the document saves but it is blank. Any ideas?
-
AX resets wireless connection to "require a certificate"
I've established connection but, apparently, the Airport Utility resets my wireless network to require a certificate and can't "validate identity" something my Linksys wireless is not set up to do. Is there a Utility setting that does not require or
-
Connected to network, but no internet connection
Just returned from a one week trip to CA with my macBook. Prior to the trip everything regarding a connection to the internet worked fine... I have an Airport Extreme network set up at home. For the first five days of my trip, everything worked fine
-
Interior decorating with an iPad 2?
I have not bought an iPad 2 but the answer to this question would help me decide: If I take a picture of the interior of my house, could I then in some way color/paint over certain areas to see how they look in a different color? For example, I have