I have a problem exporting from Acrobat Pro on OS X 10.10

I'm trying to export a PDF to Word, and am getting an error message saying "Save As failed to process this document. No file was created". This happens with all files in Acrobat. This has only started to happen since I upgraded to OS X Yosemite. I would appreciate any help with this, as this is a critical issue for us.

Hey LoveWYD,
Please try saving the word file to a different location and check.
Also, let me know is this a scanned document? Which Adobe Acrobat are you using?
As it is happening with all PDF files, you might also try repairing Acrobat from the Help menu.
Hope to hear from you.
Regards,
Anubha

Similar Messages

Big problems exporting from Premiere Pro CS3

Hey all.
Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
"premiere pro debug event
premiere pro has encountered an error
[..\..\Src\PPixHandleUtilities.cpp-114]"
When I close that, another window pops up saying;
"export error
application failed to return a video frame.
cancelling the operation."
I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
Many thanks!
Andy

>13.4GB free
FAR too small !!!
The program itself uses more than that for temporary working files
Also, unless you already have a 2nd hard drive or eSata external, you are below specification
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Problems exporting from premiere pro cs6

Heeeeeeeeeeeeelp please!
I downloaded my recent project from cs5.5 into a trial version of cs6 and now I'm getting an unknown error (problems compelling video) when I try to export my project (in H.264).
I tried shutting off the auto safe, exporting in a different format (quicktime), restarting offcause, removing effects from the clip where the export failes, even tried exporting without that particular clip, but then it just happened another place in the film at another clip.
I'm thinking there could be an export limit when you're only working with the trial, cause I have been able to export smaller bits of the timeline and as well other smaller projects. I'm a mac user and not that good at computers in general.
I can still export a early version of my project from cs5.5 but I would really love to detect the problem in stead of starting all over since it's my BA project and I'm on a deadline...
I really hope somebody know something helpfull

I been in this same situation for two weeks. First update your software to the latest update. Just released yesterday
I believe you have more than one clip. At the end and begining of the clip you should have little grey triangle shape. They are called handles, meaning extra space at end point and at begining. Usaually for transition. If you dont see it on both clips (as in picture) then the one clip which is misiing need to be trimed little or more until handles disappear or some time you see full triangle (as in picture). Do same if there are more. Then just try to export the ending where clips attach each other. Set in and out points as I did in the picture. Export and make sure to choose sequence in and out setting. here is the picture:
I hope it works. I dont use this software anymore. I had a trail version. Used for two weeks. Every day same problem then finally figured it out and moved back to Edius 6. Thanks

Exporting from Soundtrack Pro - Trouble

I am having problems exporting from Soundtrack Pro. I haven't had these problems before.
I have tried to export a track to MP3 and to Compressor but all I get is the Exporting window and that's as far as it goes. It says, 'Time Remaining: Estimating...' but then that's it. I had even left it for a few hours and still nothing happened.
The program isn't frozen, just the export isn't working. Is this a common problem? Can it be fixed?
Many thanks.

I have the same problem...
I finished working on a project and when I tried to export it - it would start out just, tell me that it would be done in less than a minute and the just suddenly stop 1/4 of the way for no reason. Same thing happens whatever I do - in the same exact place. I spent a lot of time finishing this edit so I really want to get it back to FCP.
Can anyone help?

Problems re-installing Acrobat Pro 9

I was having problems printing from Acrobat Pro 9 after upgrading to Apple OS Mountain Lion. I was advised to re-install Acrobat. I un-installed it first then tried to re-insall it from the original CS4 disc. It just hung at 'installing' and never got further. So I gave up eventually and copied the application from my laptop. That seemed to work but then it asked for the serial number when I launched it. So I entered the serial number on the back of the disc case but it didn't accept it. What do I do now? I need Acrobat Pro back some how.
Thank you.

Just to clarify - the install disc gets stuck on 'preparing to install'.

My computer crashes when I export from Premiere Pro cc.? Also, is there a known problem with Panasonic HC-V720 footage?

Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

Ask in http://forums.adobe.com/community/premiere/content
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

HUGE BUG printing Booklet from Acrobat Pro 11.0.10

I spent an hour chatting with Adobe support in India. They could not solve this issue.
I submitted a BUG REPORT at Adobe - Feature Request/Bug Report Form
Here is the BUG Report:
******BUG******
Concise problem statement:
Steps to reproduce bug:
1. Export individual pages from InDesign as pdf (16-page booklet, each individual page is 5-1/2" x 8-1/2")
2. Open pdf in Acrobat Pro 11.0.10
3. Choose actual size, then choose booklet, and print. (printer contains letter-size paper, and page set-up is set to 100% scale.)
Results: The printed booklet is the WRONG SIZE! The pagination is correct as usual, but each individual page is being REDUCED, and now each page image is too small, and there is now a GAP between pages, and the entire booklet is useless. If you can, please see case number: 0186447426: support chat: it covers everything we have tried so far ... (We tried everything they could think of, but all attempts failed.) This bug was introduced somewhere along the line with Yosemite.
Expected results: As usual, when printing booklets from Acrobat Pro, we expect the print to be the right size, the same size as the InDesign doc, and as it has been printed previously by Acrobat Pro prior to Yosemite. Thanks for fixing this disaster of a bug. Please contact me if you need further info, copies of the individual page pdf, etc.
I am literally stuck. I can go through the laborious process of using InDesign to "print booklet" to a postscript file and use Distiller to make the booklet pdf, but under Yosemite, I am prevented from installing print drivers unless that printer is locally available on my network. Unfortunately, the printer is located at my client's place of business.
I realize there is typically a leap-frog effect between operating system updates, hardware, and application updates, but combined with other Yosemite issues, this Acrobat Pro bug is killing my business.

DrStrik9 (sounds a bit poisonous to me!),
The issue, regrettably, is that Acrobat is performing as designed. And it has nothing to do with either MacOS 10.10 or anything new or different with Acrobat 11.0.10 (versus earlier versions going all the way back to the initial implementation of the booklet printing feature). And this isn't directly a printer driver issue, either! The same behaviour occurs both on MacOS and Windows.
The problem, simply stated, is that the Booklet print option in Acrobat (and Reader) is attempting to avoid loss of content due to the paper's non-printable margins. The scaling factors in the Size print option are not utilized at all in the Booklet print option. The Booklet print option attempts to fit two logical pages of your PDF file into the printable area of each physical sheet of paper. Assuming that your printer's Letter page is defined as having a printable area of 8"x10.5" due to a 0.25" non-printable area surrounding the page, then the Booklet print option will force each of the 5.5"x8.5" pages of your PDF file into a 5.17'x8" area centered on each half of the 8.5"x11" printed sheet.
There are three workarounds that I know of:
(1)    Many high end printers have booklet printing capabilities in the printer or printer driver itself. Check the detailed driver options to see whether in fact your printer / printer driver does support a booklet printing option. If so, try that first. That would likely solve your problem.
(2)    Assuming that this is a PostScript printer, edit the .PPD file for the printer you are using to to modify the specification of the Letter printable area. In the PPD file, you will see an entry similar to this:
    *ImageableArea Letter/Letter: "18 18 594 774"
or
    *ImageableArea Letter/US Letter: "18 18 594 774"
Edit the entry to change only the four numbers as follows:
    *ImageableArea Letter/Letter: "0 0 612 792"
That indicates to the PostScript driver that there is no unprintable border on your pages. Then save the .PPD file. I would then suggest rebooting and then trying to print. Note that the side effect of this is that Fit and Shrink oversized pages options will not take into account the non-printable area of your printer.
Note that a similar hack can be done with Ledger (i.e. 11"x17") page descriptions in the PPD to fix a similar issue affecting printing 8.5"x11" pages to 11"x17" sheets as booklets.
(3)    There are some very reliable third party plugins for Acrobat that provide full advanced document imposition capabilities, creating what are known as printer flats as a new PDF file from your logical pages. There are n-up, booklet, step-and-repeat, etc. options galore in such packages. Examples include Quite Imposing and PDF Snake. I have personally used Quite Imposing for nearly 15 years for this purpose and can vouch that it works beautifully. I don't have personal experience with PDF Snake, although it is less expensive.
Good luck and let us know if any of this helps you at all!
          - Dov

Export from Acrobat PDF to HTML

Is there any reliable way to export an Acrobat PDF file to HTML uising Acrobat 9 Pro Extended. When I try to do it from Acrobat, I get:
Tables that are a total, horrendous mess, nothing at all like the tables in the original Pdf.
Text that is randomly surrounded, for no apparrent reason, with span tags and completely worthless CSS. A single, uninterrupted sentence can have four or five spans, all with different CSS classes for no apparent reason. When you look at the four or five CSS classes, they all have the same, identical style attributes.
Exporting it to RTF results in a mess that is no less horrendous.
What I'm trying to do is take some rather lengthy PDFs (200 pages or more each) and use them as input to a RoboHelp WebHelp project. However, the output, whether I try an import into RoboHelp, an export from Acrobat Professional Extended, or one of several third party PDF converters is all so horrendous that it would be easier to completely retype the the 200 pages times sixteen or so documents than to attempt to cleanup the horrendous mess that results from an Acrobat export.
Why can't Adobe get their products to work together? At this pont, I've just about reached the conclusion that it is very clear that nother should ever, for any reason, under any circumstances be converted to PDF unlesss you absolutely have the documents in the original format locked up someplace because you can never get anything meaningful and transportable out of Acrobat. Please tell me that, in this day and time, the Acrobat PDF files can actually be converted in a meaningful way.

That's very true. However, you can create RTF documents with Word and WordPerfect and in this day and time, virtually everyone can read those, while they are ultimately transportable to a whole wide variety of formats, including HTML, without any significant degradation. If Adobe can't make PDFs transportable between document types in the same way, why on earth would anyone ever use the PDF format. All this hoopla about embedding video, sound, etc. is pretty much nonsense. You can pretty much do that in RTF, and few if any actually want to do it anyway.
All I can say is, why does Adobe advertise that you can export to file types such as HTML and RTF from Acrobat PDFs when you obviously can't. Why do they include the options on their menus. This is obviously a case of false and misleading advertisement. This is the day and time of transportable documents. Adobe has chosen to make Acrobat Pro an anachronistic and archaic dinosaur.
Once again, why create PDFs when they have such limited usefulness.

Problems activating the Acrobat Pro part of the CS 4 software.

I am having problems activating the Acrobat Pro program which is part of the Academic Version of CS4 -Design Premium that I bought. Once I finally got most of CS4 activated (and that had several problems as well!), I just kept getting the request to fill in my serial number. Each time I tried using the only Serial Number I had been issued, I would see imediatly a red "X" to the right of the "incorrect" serial number, along with a message that my time using the software had expired.
I have called and E-mailed Adobe several times now, and tried all of Adobe's suggestions: removed certain files, uninstall everything and the reload from the begining, do both, etc. So far, nothing has worked. As I said all the other probrams are now activated, but the only thing activated right now is my level of frustration with Acrobat Pro. Can anyone help me on this? I would really appreciate it.
Thanks,
ThomasE365

You do not activate Acrobat from the suite. You activate another program in the suite, then Acrobat should be activated. If you are having a problem, then I recommend de-activating, uninstalling everything. Run the CS4 clean script: http://www.adobe.com/support/contact/cs4clean.html
But on the offhand chance it is a license problem you can try this first: http://www.adobe.com/support/contact/licensing.html

I lost my CD, and have never registered my adobe acrobat pro.

Hello.
I lost my CD, and have never registered my adobe acrobat pro. I am trying to register it via the software so that I can re-install it on my laptop and uninstall it from my desktop, but the process always fails.
Any advise plz.

Unfortunately, I do not. This software is installed on my desktop in my office. Now, I have been given a laptop to replace the desktop. I communicated the message to the IT department in my company and they do not have the CD or the serial number. However, they said that we can overcome this problem by the registration via the software itself. So I created the account and tried via the software, but it never succeeded. The problem now will get bigger and we will lose the software because the desktop is considered expired and it will be liquidated. At the end, I was advised to contact adobe to help me register it.

Problem analyzing tools Acrobat pro 11

Science the upgrade from Acrobat pro 10 to Acrobat pro 11 I have an issue with the analyze tools. When drawing & measuring in .pdf the measurements start blinking & flashing. I've tested where the problem is. It's no hardware (video) problem.It's a software problem. The same file doesn't flash in version 10. I hope you can help me withthis problem, OR come with a fix!
I have a short video to show what's occuring. Can I sent this to make my problem appaer?

You might try looking/posting here.
Adobe Support
Adobe Forums

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

I have a serious malfunction of Acrobat Pro and PDF document viewer.

I have a serious malfunction of Acrobat Pro and PDF document viewer. with monthly subscription. Side scroll bar to review the document works desperately slow, and it is very annoying to work under these conditions. Please no solution?It yosemite my OSX system and retina macbook pro in January 2015 16GB RAM. Someone can help me please?
thanks
Bruno

Dear Sukritd,
The versión is Acrobat Pro Document Cloud subscription (anual)
The version is updated.
Noting to repair, the system is 100% running.
The problem in the scroll page in all kind of pdf files.
Thanks.
Bruno
El 2/5/2015, a las 13:45, sukritd15 <[email protected]> escribió:
I have a serious malfunction of Acrobat Pro and PDF document viewer.
created by sukritd15 <https://forums.adobe.com/people/sukritd15> in Acrobat Installation & Update Issues - View the full discussion <https://forums.adobe.com/message/7504989#7504989>
Hi Bruno ,
Could you please verify the Acrobat version you are using is the latest Acrobat DC or some older version ?
Does this happen with any particular PDF file or all the documents ?
If you haven' tried repairing your Acrobat ,please try the same and see if that helps .
For repairing Acrobat Launch Acrobat>Navigate to Help> Repair Acrobat Installation .
If that does not work you could probably uninstall the software and try downloading it again and see if that fixes the issue .
Let us know how it goes .
Regards
Sukrit Dhingra
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7504989#7504989 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7504989#7504989
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Acrobat Installation & Update Issues by email <mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

I have a problem exporting from Acrobat Pro on OS X 10.10

Similar Messages

Maybe you are looking for