I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve.

If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
Good luck in any case.

Similar Messages

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over.

I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have just lost all my contacts from my Mac and my I Phone. Don't know how. Can I get them back? Not using Time Machine

I have just lost all my contacts from my Mac and my I Phone. Don't know how. Can I get them back? Not using Time Machine

If you have no backups, and data has been lost, then it's lost forever. The rest of your data will inevitably follow if you don't back up.

I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop and i have to put in screen lock for it to even play! Anyone know how I can fix this ?

I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop and i have to put in screen lock for it to even play! Anyone know how I can fix this ?

AshleyG0990 wrote:
I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop
What you did was sync it to a computer. The iPhone can sync to ONLY one iTunes library at a time. you can't put media on it from multiple computers. It's been this way since 6/29/2007.
i have to put in screen lock for it to even play
Completely different issue. What did you think it would do when you set a passcode for the phone?

I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?

I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?

Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Hi!!I have some problems with the synchronization of my system, and I don´t know how I can solve this!

My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
Graci

I think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

How you can solve a problem or find out on a dead pc if the problem relies on motherboard and not on processor or vice versa

hi.
I am working myself with computers , so there is one thing in my mind I wanted to be sure,which I couldn't find an answer for it!
because I had before totally black screen and the problem was damaged processor.
I am wondering how I can be sure as the last option when I get a black screen and there is no lihgts at all no any LED is lighting.totally dead pc.
how you can be sure then that the problem relies on processor and not on motherboard or vice versa the problem relies on motherboard and not on processor
because I can't say to the customer lets buy first a processor if it is the cause of dead PC and if not then we buy motherboard. this sounds not wise.
so I experimented first with my latop ,I pulled out the processor to see if I can see any LED light or any movement on the motherboard to be sure that motherboard giving me some clue that it is healty. I gave some light heat to de fan to let it turn ,because
it is working with heat sensors then I know that the motherboard is healty. but it didn't work.
I did the same with my desktop computer and the result is the same no any lights and no any movement on the motherboard . so now can some one tell me how you can distuingish as a last result which of this 2 components is causing dead PC. is there any
tool to test the motherboard or how asus,dell ect. they solve such a problem if the customer send to them a dead pc.
I know that the power supply also can cause dead pc but I know how to solve a problem with dead power supply. and I want to keep away power supply from this question. please do not tell me that Idon't have to pull out processor
because I am a technician and both of my computers are doing very good after this experiment.
thanks
johan
h.david

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

I have to "force quit" every time I use iTunes or mail,does anyone know how I can fix this?

When I use iTunes for more than a half an hour and when I use Mail at all,my computer won't shut down or log off unless I Force Quit those programs.It used to only happen once in a while,but lately it happens every timeI use them.Any suggestions on how to fix this problem would be welcomed.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT201263 my iphone 3g is coming up with an error message once it gets half way through the restore it says error phone cant be restored anybody know how i fix this

i have been trying to update my iphone and when i tried to do so it said i needee to restore it first so tried this and since my phone just has the usb icon and itunes showing on it wont turn on or anything and half way through restore it comes up with an error message saying it cant complete it anybody know how i fix this please doin my head in

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

When i want to call somwhone with my i-phone, i only hear the other person, if i press the loud-speaker. does anywhone know, how i can solve this problem

what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem

Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers

I have sycn photos from my computer to my ipod and i need to know how to delete them from my ipod

I have sync photos to my Ipod touch from my computer and i am trying to find out how to delete the ones on my Ipod that i do not want there

Synced photos can't be deleted directly on the device - instead they are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

Got a new Samsung galaxy s3 and can't get messages from iphone users now. Don't have the old iphone to change the settings ! please help . need to know how I can get messages on my galaxy

Can't get messages from iphone users on my new Samsung g allaxy and don't have my old iphone anymore ! Please help !

Read here under no longer have device:
http://support.apple.com/kb/ht5661
Be aware, changing your Apple ID password doesn't always work, & can take up to 45 days to work.
It's either that, or you call AppleCare & have them fix.

Beginner wants to know how you can on the first loop enter a value then let a feedback number take over from there

How can I on the first loop enter a number into the amplitude subsection of the simulated signal box, and then from that loop onwards use the feedback number?
I am using a simulated signal, tone measurements, and case structure with + or - calculations depending on orignal reading to control the amplitude to a user defined value.
Any help would be very much appreciated, as i have just started out on labview 7
Cheers

That's the purpose of a shift register or feedback node. They are the same thing and interchangeable. Loop at the attached picture. You initialize either outside the while loop and then whatever calculations you perform, are passed to the next iteration.
Attachments:
feedback with initialization.jpg ‏8 KB

Just watched the keynote on safari from wwdc and while phil schiller was demoing mission control i noticed the set up of his iCal with the date in the left hand corner, does anybody know how you can make that on your own laptop please, i love the view of

Can anyone help with my query at all

Buy Mac OS 7 (Lion) when it is released. That is the new Day view of iCal.

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

Similar Messages

Maybe you are looking for