I have a problem in playin avi files!!!

Hi all,
Iam trying to play an avi file using an applet.But the applet is displaying the avi file only when the JMF package is installed in my machine.I need to play the avi file without installing that package,but only using the jar files used by JMF.Can anyone suggest what are all the jar files that needs to be included in the classpath without installing JMF.It would be helpful for me if somebody replies with a solution for this..
Regards,
Prabakaran.

hi
add jmf.jar and sound.jar to your classpath
bruclee

Similar Messages

Problems in importing avi file

I have problems\ in importing avi file..
when i try to import an avi file,, it is written that there is a message "unsupported format or damaged file"..
What should I do then?
I use Windows Vista Ultimate..

Welcome to the forum. As Harm points out, AVI is but a wrapper, and can contain all sorts of data inside. This ARTICLE might give you some insight into working with AVI's.
Good luck,
Hunt

HT3775 i have a movie in a .avi file and when i open the file it attempts to convert and gives me an error message

I have a movie in an .avi file and when i open the file the Mac attempts to covert the file and it doens't play. What can I do?

VLC will play avi's, even if the index is broken. IT can repair most broken avi's but will still play them if it can't.
VLC Media Player

HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

It should unzip if you double-cick.
What are you seeing happen when you do that?
Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

Have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
(97189)

I have 8mm films transferred to .avi files at 18fps. Can I use Final Cut Express to convert to standard DVDs to play on a US TV?

I have 8mm films transferred to .avi files at 18fps. Can I use Final Cut Express to convert to standard DVDs to play on a US TV?

Hi
I was hoping that FCE would be able to handle the coversion from 18 to 30fps but that appears not to be the case.
It does - If I'm not totally wrong. Can be to much using FinalCut Pro (6)
Start FCE
Select type of project You want to do
I guess - NTSC 29.97fps - Select that from FCE menu / Easy Set-up
Start a new Sequence
DROP A PHOTO in TimeLine - at beginning.
Now project is locked to 29.97 fps
Now import and drop the 18fps clip in TimeLine.
Select to convert it to match the setting of TimeLine.
IF THIS IS A GOOD WAY - I hesitate to say - It works - but if quality is OK or not - I don't know
I DO : use JES_Deinterlacer (free from Internet) to convert the frame rate in my clips (usually 25fps) to 29.97 fps - Then and first then I import the converted clip into FinalCut to be used in my NTSC projects.
The quality done in this way - is very good and the program is free - so I can not want any better.
Yours Bengt W

Hi.. i am finding problem in transferring .avi file from dektop to itunes

hi.. i am finding problem in transferring .avi file from dektop to itunes

iTunes does not support .AVI files. However, you can use iSquint to convert the file to an Apple-Friendly format (Its free, and really easy to use) http://isquint.en.softonic.com/mac

Problems With Camptasia AVI File in Premiere CS4

Hi everyone,
I need help with the creating a video in Premiere CS4 using some Camptasia AVI files. I have used Camptasia to include a voice-over into a presentation and then saved it as an AVI file. I was able to include that AVI file into my Project in CS4 and edit it there adding to video files transferred from the camera. The problem came up when I tried to export the CS Project as an AVI or FLV file. It does not save the entire video but rather saves only the first couple of minutes of it. Can someone recommend me what to do?
Thanks a lot in advance.
Bahar

The problem is in the file itself. You set up your project in premiere at 30fps and imported file from camtasia studio does not have that frame rate. Camtasia does not have a good and fast enough codeck that would record 30fps. So premiere will try to recompress your file to proper structure with 30fps thus will give you the output of a very short file.
Camtasia have another software that is designed to capture needed frame rate but it is available only to the big companies.
I have tried this soft and ran into this problem and camtasia replied to me whit statement that this soft is not designed to capture full frame rate video.

Audio timing problems with publishing AVI files... Desperate for suggestions!...anyone?

I could really use someone's suggestions on how to troubleshoot this issue. Been working on this issue for 6 weeks, with no solution in sight.
I have created demonstration tutorials in Captivate 4, (purchased, not demo) and am using the text to speech (Kate's voice) as the audio. I am trying to get an AVI file as the final product, as I will be publishing this on YouTube.
When I publish the file as an AVI, the audio does not sync with the video. (The audio is slightly faster, so when I get to the 15th slide, the audio is ahead of the video.) However, when I publish to an SWF file, the audio syncs perfectly.
I had been working with Adobe Tech Support, and their feeling was that my file was corrupted. So I created a brand new file, new recordings, etc, even made this file shorter (3 minutes long), and I experienced the same problem. Deleted all non-used files. Working on the local drive, not on the network.
To troubleshoot this, we recently reformatted the hard drive on this machine, took every program off, defragmented, so the system is very lean and clean. We reinstalled Captivate and all the updates from the Adobe website links, in case our CD version of the app was corrupt.
Added more memory, so now we have 3 GIG of memory.
Running XP, the only installed programs are MS Office, Kasperski, and Captivate.
I restarted, and do not have any other program actively running (except Kasperski)
Does anyone have any experience with the same problem, or suggestions on what else I can do to fix this problem?
I will send you virtual Karma points if you can help me.
Thanks for reading this!

Hi again
Thanks for the Karma thought!
As an aside, I try to do all my banking at the First Universal Bank of Karma! W00T!
On the TTS bit I'd be totally shocked to discover it were a factor. This is because the only thing that happens with it (as near as I can tell) is that the text is converted to a WAV/MP3 file same as would occur by virtue of recording one using a microphone. So I figure a WAV is a WAV is a WAV.
Then again, I never claim to know it all about anything. Then again, I also think anyone that DOES claim to know all there is to know is either foolhardy or a pompous donkey.
Cheers and good luck! Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

I have been asked to provide AVI Files?

I have just finished 16 videos of a band playing live synced to music, the band have asked if i can provide AVI files. Could anyone help with this please.
I originally provided them with Quicktime H.264 on a hard drive and a full DVD. Plus iI phone versions.
Many thanks,
Mac.

AVI is an ancient windows format.
If they are just looking for direct Windows compatibility, you can offer up WMV versions. To generate them you'll need one of the paid versions of Flip4Mac's encoder (the least expensive will work fine). The free version only reads WMV.
x

Sound problems with an .avi file?

Hello all,
I am working on a presentation where there is a background
loop .wav and some .avi files. When the .avi files have audio I am
dropping the volume of the loop. I made the loop a new sound with
the code below and set up a global so that I could properly target
the sound. The code is below.
// set up the global so that bgMusic can be targeted from
other scenes
_global.musicTimeLine = this;
// make a new Sound called bgMusic
// loopwav is the linked name of the .wav file
bgMusic = new Sound();
bgMusic.attachSound("loopwav");
bgMusic.start();
trace(bgMusic.getVolume());
I then drop the volume on the frames with .avi movies with
audio with:
// drop the volume of bgMusic
musicTimeLine.bgMusic.setVolume(20);
Does anyone know why this is also affecting the audio in the
.avi file? Thanks to anyone who can help!
EW

It may be because new Sound() is a global sound controller.
Meaning that it will affect any and all sounds within your movie.
Try associating the Sound with a movieclip. For example,
bgMusic = new Sound(this);
Then changing properties of the bgMusic sound object should
only affect the sounds in that movieclip and not globally.
Also, not sure if this is true for FLV and MP3 files brought
in using the FLV component.
Tim

Problem import large avi-files into iMovie '11

I have a large AVI-file, DV, from an old video camera that I want to import to iMove '11. The file is 10,37 GB but when I import it to iMovie only a few scenes is visible. Also, iMovie says the file is 4,71 GB.
How do I import the whole file?
Thanks
/Torbjörn

If you can convert the AVI movie back on the PC to Quicktime, this would be your best option. AVI files are limited to 4GB in size. To get around this limit, the AVI file might be referencing other smaller files on the PC. The AVI file format has been pretty much abandoned by Microsoft which now uses the WMV format.

I have a problem with uploading pdf files. This was raised in April by Mariano and the solution given - but the link to the solution does not work. How do I get to the solution?

I have just come across this problem uploading pdf files on FF 3.6. Mariano posted this same problem on 5 Apr ( I found his post after a Google search as a search of this Forum gave no result). It is shown as "solved" but when I click on the Show Solution link it just loops back to the question.
How do I get to see the solution?

The following line tells me that this is not a template file, but a document created from a template called index.dwt
<html xmlns="http://www.w3.org/1999/xhtml">
This means that you saved a child document as a template file at some stage.
If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

I believe I have a problem with my Jar file build.

Hi, there. New to Java/JavaFX. Testing language features. Operating System: Windows 7; java version 1.7.0_03; javafx version 2.0.3.
This is a simple test with 2 classes: Test1.class resides in base directory "MyJavaFX"; TextFileLoader.class resides in sub-directory "inout" of "MyJavaFX"(i.e. MyJavaFX\inout).
Test1.class has an import statement "import inout.TextFileLoader;" TextFileLoader.class has a package statement "package inout;"
Both classes compile without problems and jar file is created using Ant tasks.
Within "MyJavaFX" as my current directory, When running Application Test1 (java -jar Test1.jar)
getting error "ClassNotFoundException: inout.TextFileLoader".
I believe it has to do with how Test1.jar file is built. I believe line 4 should say "inout/TextFileLoader.class"
instead of just the simple class name but I can't get my Ant task to set it up that way.
This is "Test1.jar":
META-INF/
META-INF/MANIFEST.MF
Test1.class
TextFileLoader.class
com/
com/javafx/
com/javafx/main/
com/javafx/main/Main$1.class
com/javafx/main/Main.class
com/javafx/main/NoJavaFXFallback.class
This is my "build.xml" file:
<project name="JavaFxTest" default="default" basedir="."
     xmlns:fx="javafx:com.sun.javafx.tools.ant">
<target name="default">
     <taskdef resource="com/sun/javafx/tools/ant/antlib.xml"
     uri="javafx:com.sun.javafx.tools.ant"
     classpath="C:/Program Files/Oracle/JavaFX 2.0 SDK/tools/ant-javafx.jar"/>
     <fx:application id="Test1"
     name="Java Test Program"
     mainclass="Test1"/>
     <fx:resources id="appRes">
     <fx:fileset dir="C:/Program Files/Oracle/JavaFX 2.0 Runtime/lib"/>
     </fx:resources>
     <fx:jar destfile="C:/MyjavaFX/Test1.jar">
     <fx:application refid="Test1"/>
     <fx:resources refid="appRes"/>
     <fileset dir="." includes="Test1.class"/>
     <fileset dir="inout" includes="TextFileLoader.class"/>
     </fx:jar>
</target>
</project>

if javaw fails to launch the VM then a dialog should be displayed with an error. The first time I launch an application with javaw (after installing the JVM on a new machine it takes a long time for it to happen. have you tried from the command line >javaw -jar D.jar? I'm wondering if the installation of java went well on your machine. It's supposed to set up things correctly. did you install a new version of java over an existing one? maybe there was a java plugin previously installed on the machine before you installed j2sdk.
walker

I have a problem with opening PDF files downloaded from anywhere!

I can view them ok in Safari, but when I save and download them, they are displayed with the Preview image and will not open.
When I click them, a message says that 'the file may be damaged or not recognised by Preview'.
I have cleaned up my computer (apple help ) but still, the problem remains. I downloaded the same file to my MacBook pro, and it saved it in the usual PDF format, (completely different image from above), and opened perfectly well.
I have checked the settings in Preview and they seem to be set correctly so that Preview will open PDF files.
What next?
I am desperate!
Jennifer

See if you can delete any Adobe PDF plugins from /Library/Internet Plug-Ins/. Then quit and re-open your web browser and try again.

I have a problem in playin avi files!!!

Similar Messages

Maybe you are looking for