I have a problem regarding sales order line item with confimed quanity

Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0'  with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 -  When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx  and the order is set with credit check.  Once the order is relased from the credit check.  The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2-  Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check.  Then  for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,

Hi,
I agree with your point.  In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check.  Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5,  But it should set to Zero quantity.  Quatity should not be get confirmed it should be Zero Quantity. 
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok.  But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards.

Similar Messages

  • Copying text from CMIR (KNMT) to the Sales Order Line Item

    We need to copy text from the CMIR (KNMT) to the Sales Order Line Item with two steps in the access sequence. First to look up by the Ship to Partner Function.  If doesn't exist, then look up by Sold to Partner Function.  Have setup a new text id (ZPRN), a new access seq (9011).  The access seq has one seq =5 for KNMT, ZPRN, all languages and that saves fine.  When I set the Partner Function to be SH.  I get the following error msg:
    "The Language does not come from the partner function AG for MVKE".
    Any ideas?  This access seq does not reference MVKE. It only references KNMT.
    Thanks!

    Hi Lisa,
    Just stumbled on this post, as I am searching for something similar.
    What you are attempting to do isn't possible in config.
    This is because as standard Customer Material Info Records are not even considered for ship-to party in the sales order.
    They work for sold-to only.
    Therefore, this funny error message is SAP's way of saying, "Why are you trying to enter a partner here, because the data is determined for sold to only?"
    You can change this with development for other fields (ie, to determine delivery plant, tolerances etc at ship-to) by using
    the exit MV45AFZB with the USEREXIT_CUST_MATERIAL_READ form.
    However, even if you do this, Text Determination is still sold-to only and still doesn't behave.
    I am currently looking myself for a solution for this problem and I will let you know what I find.
    Cheers
    Chris

  • Update Sales Order line item field

    Need to update a field mfrgr of VBAP table with some user defined values on selection screen parameter.
    I have selected all the Sales order line items in an internal table which need to be updated.
    How can I use the update command with set expression to do the same ? If yes how ? if no what is the best way to do the same.

    I am using the following command and it doesnt work as it says cannot use AND command.
              loop at it_vbfa.
                    UPDATE  VBAP
                    WHERE VBELN = it_vbfa-vbeln
                    and   posnr = it_vbfa-vbelv
                    SET MFRGR = P_MFRGR.
                    IF SY-SUBRC = '0'.
                       COMMIT WORK.
                    ENDIF.
              endloop.
    Any pointers ? What am I doing wrong.

  • Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

    Hello Experts
    I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
    For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
    Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
    My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
    use GR Doc date as billing date
    3rd party sales process (w/o ship notif) - Billing

    Hi Lakshmipathi ji,
    As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
    For Ex
    Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
    Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
    So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
    Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
    Regards
    Hiba

  • Sales order line items delivery cancelled but still appears in MD04.

    Hi PP Gurus,
    In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
    Thanks and Regards,
    SHARAN.

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

  • No cost booking against sales order+line item once accontng release is done

    Dear all,
    I want to stop all cost bookings against a sales order + line item once the accounting release for that item has been done.
    By cost booking i mean, all such transactions that are done for a sales order + line item that involve cost booking. Like, MB1A should not allow any goods issue against that sales order + item once accounting release is done.
    Is it possible to that in sales order? Like by using any status at item level.
    Please guide.
    regards
    SAPshed

    Hi Ajay,
    We have not kept automatic cost estimate marking during saving of sales order as costing dept wants  to confirm whether costing for the SO is correct or not.
    Hence we have to use CK51N.
    Now the problem is for any change in any line item of a sales order is changing the costing status from "VO" to "KA" for all line items of the given sales order in table KEKO.
    This is causing measure problem as production people are facing problem while making any change in production order as already there is a check put in CO02 that if cost estimate does not exist for underlying sales order, then change in production order should not be allowed.
    Similarly production order creation (converting planned order to production order) is getting held up.
    Costing user has to repeated run CK51N for all line items of a single sales order if there is any change in any single line item of the sales order.
    Hence pl. help and suggest as to what is to be done now.
    Regards
    Ratna

  • Field added in Aditional data tab of sales order line item at screen 8459

    Hi all,
    My problem is .
    I have appended one field in VBAP table, given it a name "WBS ELEMENT"
    The field is getting displayed in VA23 as well as VA02 Transaction.
    when i create sales order with the quotation reference,
    the "WBS Element"  of line item of quotation should get updated in "WBS Eleement "  of sales order line item
             This i am doing by triggering user exit.
    Problem is:
    Once Quotation  line item get copied to the sales order line item
    and the screen is in front of you with those details,
    before saving sales order .
    if you go at the sales order line item withou saving the document
    The field i have created in the screen 8459 i.e WBS Element ,doesnt get displayed.
    how could i retain the field Ihave created on screen 8459
    while creating the sales order from quotation before saving that sales order.
    Pleas help .

    Hi Vikram,
    It seems as it has been coded only to save the values into the new field that you have appended to VBAP. But before saving if the user wants to see the field, it is blank. You can try coding in PBO (process before output) of the relevant screen as follows:
    1. Get the reference of the quotation. Something like XVBAP-VGBEL will give this number.
    2. Get the value of Z field in VBAP by passing this quotation.
    3. Copy the above value to the corresponding Z field in XVBAP (or any internal table which holds VBAP data before saving)
    Please reward if helpful.
    Regards,
    Krishna

  • List of sales order line items delivery

    Hi All,
    I want to know from one single table, the list of sales order line items delivery completed and still having stock.
    Ratna

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

  • Restrict deletion of sales order line items

    Hi,
    I need to restrict deleting of sales order line item, I think we can use the user exit, MV45AFZB, USEREXIT_CHECK_XVBAP_FOR_DELE.
    But when i set the flag to 'X', even though it does not delete at tht instance when the sales order save is clicked again the line item gets deleted.
    ANy idea , to prevent that?
    Thanks
    Keshi

    Hi Keshi,
    That is the correct exit, we are using the same without any problem. Just set US_EXIT  = CHARX.
    Regards,
    John.

  • Re-Cost (CK55) Marked Sales Order Line Items

    My current client resets standards each quarter. They have requested to re-cost open CTO Sales Order line items and update the valuated sales order cost (EK01). I have reviewed the options available in CK55 - Mass Costing and find the processing log retrurns the following message:
       Cost estimate with status VO exists. See long text
       Message no. CK_MCSO014
       Diagnosis
       A cost estimate with the status VO already exists. This cost estimate will not be overwritten.
       System Response
       Processing continues with the next item.
       Note
       You can remove this message from the log with the customizing transaction User-Defined Error Management for Mass Costing of
       Sales Documents. The item will still not be costed, however.
    Short of manually re-costing each open sales order line item. Is there a way to re-cost open CTO Sales Order Line items?
    Regards,
    Dewayne Wesley

    I didn't realize there was a MASS Cost transaction.
    Is there a MASS delete Sales order Cost estimat transaction? That would help.

  • Not able to re-atp 1of the sales order line item

    Hi SAP PP Gurus,
    When I tried to re-atp 1 of the sales order line item it is giving error as mentioned below. Please let me know where this fix qty indicator in the sales order and how can I de-activate the same.  Thanks in advance....
    Item has no open quantity - Check fixed quantity ID
         Message no. V1 601
    Diagnosis
         The item does not have any open, confirmed quantities and the "fix
         quantity" indicator is activated. This means that the customer has
         agreed on a zero quantity and nothing is delivered.
    System Response
         The system issues a corresponding message.
    Procedure
         If you want the item to receive a confirmed quantity after all which can
         be delivered later, you should de-activate the fix quantity indicator.

    Hi Ritish,
    Strategy is MTO..
    I have triied to perform atp by using fix qty/date but still system in not proposing MAD. And it is giving below error screen.
    No. of components checked:                1
    Missing parts:                            1
    Overall confirmation date could not be determined
    Order : 1104739992
      Material           Plnt SLoc Reqmts q     Requirements  ATP/avai     Committ. d Material description M Bl
      NH524AA@@          32F2 F2WH   1.000      03.08.2009      0.000      99.99.9999 HP gt7725 PCI Expres X
    Thanks and Regards,
    SHARAN.

  • Print Preview of 'Document' attached to a PR/PO, Sale Order line item

    Is there a BADI/BAPI involved in 'Print Preview of Document attached to a PR/PO, Sale Order line item'. When I select a line item in PO for which a DIR is attached, it doesn't display the files content in the Print Preview.
    Q:) Is the system supposed to display the 'Original file' content attached to a DIR in the Print Preview Or is this the standard behavior that system won't display attached DIR - file content.
    Please advise.
    -Thanks

    Hi,
    unfortunately I have to inform you that from DMS point of view such a 'file preview' function is not available in the standard of the R/3 system.
    If you want to raise a development request at SAP please see the SAP note 11 for further information.
    Best regards,
    Christoph

  • Production Order quantity should be same as Sale order line item qnty

    Dear experts
    we have one user requirement as such
    Production Order  line item quantity should be same as Sale order line item qnty.
    suppose for SO Line item he is ordered 100mts,Production of this paricular Line item should also be 100mts it should not be more than this,How to satisfy his requirement.
    Regards
    Sandeep patil

    Hi,
    If the Manual intervention is eliminated for processing of the data then the SO Line Item Qty will be equal to Production order Qty.
    Background Jobs for MRP Run, Planned Order to production order cretaion will help you to manage this, along with effective Authorization Management.
    Regards,
    Siva

  • Sales Order Line item category not getting Re detemining Correctly

    Dear all,
                I need  help regarding the Sales order item category redetermination.
                we are having two item categories YNAE and YNAG and it contains schedule  line categories CP and CB ( i.e for item         category  YNAE schedule line category is CP and for item category YNAG schedule line category is CB),
    for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
    For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
             Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and  it is working fine .
             But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule line on SAVE and its delivary dates are also not getting determined properly. If i press the option ATP check at the schedule line level than very things will getting corrected.
       I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
    Regards,
    Vaddepally Manoj

    USEREXIT_PRICING_PREPARE_TKOMP is the wrong location - that exit is for pricing communication preparation only.  Your primary location for item category determination is USEREXIT_SOURCE_DETERMINATION (MV45AFZB).  In your simple scenario, you could consider making an availability check at this point with some assumptions and then assign the item category accordingly.  Otherwise, you can re-assign item category and schedule line category in USEREXIT_MOVE_FIELD_TO_VBEP.  The exit is called once before ATP (for ATP-relevant schedule line categories) and once afterwards.  The call is recursive if you re-assign another ATP-relevant category.

  • Sales Order line item confirmed?

    Hi,
    Is there any table / field to which we can refer to for knowing whether the sales order line item's open quantity has been confirmed or not.
    I see the line entries in table VBEP, but, in that I guess I'll have to do calculations to check whether the line item open qty is equal to the confirmed qty.
    Please let me know if there is any other method.
    Thanks

    Hello Yusuf,
    Try with the table
    VBBE- MENG - Open Qty
    VBBE- VMENG - Confirmed quantity.
    or
    VBEP- WMENG - order quantity
    VBEP-BMENG   - Confirmed quantity
    or
    VBAP- KWMENG --Total Quantiy
    VBAP-KBMENG-- Confirmed Quantiy
    Regards,
    Thanga

Maybe you are looking for