I have a problem that iOS7 gives me headache, how to turn these features of?
Hi,
I do have a problem that when using iPhone with the new iOS7 I do get a headache, and so do several of my company employees. I have tried to turn of in settings but this do not help... I would be sad to have to replace all iPhones in the company, but the cost with employees becoming dizzy is quite bad.
I hope that Appple do take this seriously, and will come up with a fix soon?
Turn of parallax effect by going to
Settings -> General -> Accessibility -> Reduce Motion and turn that off.
Also I would keep brightness to minimal.
Similar Messages
-
Hello i have a problem that i was making update IOS7 for my i phone 5 it's taking a lot of time about 4 hours till now, i can't use my phone know, it's appere logo i tunes only, can't do eny thing else like shutdown
Hey Andrew keriakous,
Thanks for the question. It sounds like your iPhone may be in recovery-mode. To resolve this issue, see the following:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Hi, I have a problem that I receive lots of Spam messages from my office, I cannot bar the spam text from service provider due to official constrain.
I just want to know if there is any mechanisme where i can bar the message from a specific sender. I know there are some apps like Iblacklist available but we do not find it in any Iphone which is not jailbreak. I was just thinking of developing some code for it.No. You can't. Filtering would have to be done at the server level.
-
how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my back up the operating system was ios 6.1.2..
Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?
-
A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past. -
I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?
Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon -
My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?
If you print to PDF first, and then print it from Preview does it work?
-
Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night
Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night but my iPhone 5 and Mac mini still connects to the same wifi network I have called apple support and they had no clue what the problem is, have tried changing the http settings to auto and resetting the network setting on the iPad but no luck so far would appreciate any help thanks josh
One possibility is that there is an allowed time period for access programmed into your WiFi router for the MAC address of your iPad.
What make, model, and version WiFi router do you have?
Another possibility is that you are getting some WiFi interference from a nearby WiFi network which is automatically turning on at 9:30 PM. A nearby home security system could be the culprit. -
hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar -
I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please
I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please
-
I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?
What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-( -
Hi I have this problem that when I send a mail to someone mails that I have already sent out end up on this email sometimes two or even twenty different mails end up going to the person I'm send ding a mail too please help
I have been doing some test now and have found out that my mails are being merged according to subject eg, so if I use cleaning goods as a subject and send out a new mail all mails with this subject are sent to the one person
Maybe you are looking for
-
Help needed automate multiple faxes to multiple recipients
Here is what I do each month in my business of buying and selling houses 1. I down load a list of houses for sale from a mls realtor database to excel. 2. The ones I want to bid on I copy to a separate file which I use as the data source for datamerg
-
I had been working on two sites for several weeks. I woke up this morning and started iWeb 08 to finish my work, and the sites I had created were gone! They no longer showed up in my iWeb application window. I'm ******! Is there anyway to bring a pub
-
Hi: Does anyone know taht is there a component in portal 8.1 similar to what portal.wf component does in portal 7. thanks. Regards, Qiang Guo
-
Error 1004- downloading App for iPad
I have an iPad and I'm trying to download an app but I keep getting Error 1004. What does this mean? and how can I fix it? Thanks for any help!
-
Crashes when editing during playback
I have been very frustrated with trying to make edits while logic plays back audio. I've used most other DAWs and never had this problem. It seems like every time I try to make an edit, or pull up a plug in (while mixing), or save the project, playba