I have a problem to install  tomcat-connectors-1.2.18 on apache httpd-2.0.5

the error is
could not find /usr/local/apache-2.0.59/bin/apxs
configure: error: You must specify a valid --with-apxs path
the path is ok

You might have to install the httpd-devel package to get what you're looking for.
~Jer

Similar Messages

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • Have a problem while installing Asmlib packages

    hi all
    I have some problem while installing ASMlib packages.
    my OS=Redhat linux 5.3
    kenel version using this command uname -r=2.6.18-128.el5
    I have downloaded packages and successfully installed following 4
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
    but while installing following got error
    rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
    kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
    kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
    kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
    thanx in advance

    I think you just need below rpms to configure asmlib:
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    Read this thread:
    Error install ASMLib on RedHat linux

  • Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found

    Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found?

    32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
    64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

  • I have two problems when install 9iR2 in the RH9.

    Hi, everyone:
    I have two problems when install 9iR2 in the RH9.
    1. I am going to 9iR2 in RH9 that the default character set is Chinese, so how I should set the environment variable NLS_LANG?
    2. When I set the default character set is English, after I run the "runInstaller", in the terminal will display some error messages:
    Warning: cannot convert string "<key>Escape,_Key_Cancel" to type VirtualBinding
    Warning: cannot convert string "<key>Home,_Key_Begin" to type VirtualBinding
    Warning: cannot convert string "<key>F1,_Key_Help" to type VirtualBinding
    Warning:cannot convert string "Shift<key>F10,_Key_Menu" to type VirtualBinding
    Warning:cannot convert string "<key>F10,Shift_Key_Menu" to type VirtualBinding
    Warning:cannot convert string "<key>KP_Enter,_Key_Execute" to type VirtualBinding
    Warning:cannot convert string "<key>Return,Alt_Key_KP_Enter" to type VirtualBinding
    How should I correct.
    Thanks a lot!

    Problem #2 is not a problem. We have been able to somewhat install Oracle when those warnings appear. The client install works fine with those warning messages in the terminal window. NOTE: They are just warnings...

  • I have a problem to install photoshop 13 on mac they dont recodnize my password wich i recently sucssesfuly change please help me

    i have a problem to install adobe Photoshop 13 on mac they don't recognize my password witch i recently change successfully

    i dont have the answer

  • Hey guys i have a problem by installing Adobe Premiere Pro Cs4.

    Hey guys i have a problem by installing Adobe Premiere Pro Cs4. I am german and 14 years so sorry for by bad english...  I downoadet the setup, installed all the software, but when i wanted to run it the first time, adobe sayd: You have to estart your computer, if hat doesnt work ask our support...mistake (dont know what the right word for mistake code is) code is 131:4, now i hope that you can help me by installing the software in the right way!
    I hope you can help me...

    Na was für'n Computer? Hast du den Neustart auch wirklich gemacht? Warum CS4? Klingt einfach so, als ob du das Ganze mit unzureichenden Benutzerrechten gemacht hast und somit die Installation nie richtig fertig wird...
    Mylenium

  • How can i vusualize the application Java in my system ? i have actually problems to install my bank's protection module -

    How can i vusualize the application Java in my system ? i have actually problems to install my bank's protection module … My computer is an Imac and the Operation System is OS X Mountain Lion 10.8.2 ... PLEASE HELP ... THANKS !!!

    Thanks about your advise but i can not change my bank accout ... this protection module will only works if i have the java installed in my imac ... I just bought the OS X Mountain Lion (10.8.2) new version and i can not see WHERE IS THIS JAVA ??? When i open my "system preferences / others / ... there is nothing  . My bank told  me that without this JAVA i Will not have my protection module. Can you help me  to find it in my Imac ???

  • I have a problem when installing Office 2013

    Dear Microsoft support team!
    I have a problem when installing Office 2013 as follows:
    "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. when setup microsoft office 2013"
    I don't know why it is so. Pls help me!
    Thanks and best regards!

    Have your tried to perform the common troubleshooting steps for installing Office 2013 as the following article?
    http://support.microsoft.com/kb/2822317/en-us
    If not, please try it first. Feel free to post back. Thanks.
    Tony Chen
    TechNet Community Support

  • I have a problem to install may apps. I have started the program to download my apps but it does not happend anything. What is the problem

    I have a problem to install may apps. I have started the program to download my apps but it does not happend anything. What is the problem?

    D117 is the behavior describing similar to the screen shot in App doesn’t open | Progress wheel spins continually?  If so then please utilize the solutions within the document to resolve the current error.

  • Installing Tomcat connector for Apache

    I realize this is more of a Linux configuration issue but it does deal with Tomcat so I am hoping someone can help.
    I am having some problems installing the tomcat connector for Apache web server on Linux (Red Hat enterprise).
    I need to have both Apache (by which I mean Apache Web Server) and Tomcat running on this system and it is my understanding that one can use the tomcat connector as an Apache module to connect from Apache to Tomcat for jsp requests.
    Okay so here is what has been done.
    Tomcat is installed and running fine (on port 8080)
    Apache is running fine.
    I followed this guide http://tomcat.apache.org/connectors-doc/howto/quick.html
    And I created all the config files etc but when it comes to finding the mysterious mod_jk.so file I am stuck. I went to the downloads area and end up in the following directory/page http://apache.mirrors.northco.net/tomcat/tomcat-connectors/jk/binaries/linux/jk-1.2.14/
    I don't see a mod_jk.so file in there. (?!?) So... I poked around some more but I feel I am looking at the right directory so I downloaded the worker.so file and put that in my apache modules directory. I renamed it as mod_sk.so (now please bear in mind that I am not too dumb and I realize that renaming a file isn''t doing anything magical but due to lack of any documentation describing why there are two different files I took a guess and thought that maybe the different files are different threading setups or something (considering the other one is named prefork to me this seemed to be a logical conclusion based on the information given))
    And of course it doesn't work. By which I mean the following happens if I run configtest for apache (if I try to start Apache same disaster)
    # /sbin/service httpd configtest
    Syntax error on line 3 of /etc/httpd/conf.d/tomcat_connector.conf:
    Cannot load /etc/httpd/modules/mod_jk.so into
    server: /etc/httpd/modules/mod_jk.so: cannot open
    shared object file: No such file or directoryOkay... Except a file with that name (see above) IS in that directory. And it has the same permissions as the other modules which are loading.
    (After moving to the modules directory)
    # dir
    libphp4.so mod_cache.so mod_imap.so mod_proxy_http.so
    mod_access.so mod_cern_meta.so mod_include.so mod_proxy.so
    mod_actions.so mod_cgi.so mod_info.so mod_python.so
    mod_alias.so mod_dav_fs.so mod_jk.so mod_rewrite.so
    [more stuff that loads here but edited for length]So I think something else has gone wrong here... namely that I have the wrong file or something.
    Anyway I am a bit stuck at this point. Could someone point me in the right direction please because I am just going in circles at this point with the documentation not matching up to what files are available or explaining what those files in fact actually are.

    I solved this issue by compiling the file from source. I got hold of another admin friend who told me that the version I had was for 64 bit. Now how I was supposed to discover this or where in fact a compiled version of this file is on the apache site I know not.
    But it's working now.

  • I have a problem when installing the Developer Suite

    Hello,
    I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
    Please help me with this :(

    Hi user;
    I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
    Regard
    Helios

  • I have a problem on installing CreativeCloudSet-Up!

    I tried to install Creative Cloud App,but it said that it can't install Creative Cloud Desktop in my computer.
    How can I slove this problem and install Creative Cloud Desktop?

    what os?
    and attach a screenshot of the error message, http://forums.adobe.com/message/4209263#4209263

  • I have a problem with installing AdobeCreatePDFDesktopPrinterSetup.

    Hi,
    When I tried install AdobeCreatePDFDesktopPrinterSetup I have been experiencing a problem what I can do.
    Please have a look at this picture
    After that, I applied these steps:::
    Windows 7 / Vista 
    Choose Start > Control Panel > Printers.
    Click Add A Printer.
    Click Add A local Printer.
    Click Use an Existing Port and select "FILE: (Print to FIle)." Click Next.
    Select Xerox from the Manufacturer list and select Xerox Phaser 6120 PS from the Printers list. If the Xerox Phaser 6120 PS isn't listed, choose any other printer with "PS" in its name. Click Next.'
    Click Next
    Click Do not share this printer. Click Next.
    Uncheck Set as default printer. Click Finish.
    Reinstall the Adobe CreatePDF Desktop Printer. 
    Login to: https://createpdf.acrobat.com/
    Click on Set Up Adobe CreatePDF Desktop Printer
    On the new dialog box, click on the Download Installer button.
    Save the AdobeCreatePDFDesktopPrinterSetup.exe file to a location you can find again, such as your Desktop.
    Run AdobeCreatePDFDesktopPrinterSetup.exe to reinstall the Adobe CreatePDF Desktop Printer.
    Verify functionality of the Desktop Printer, if it is working you can go ahead and delete the local printer that was installed previously.
    But didn't make difference and the problm is still going on.

    I have tried running it as an administrator, however, that makes no difference. On the other hand, did you check that picture which I have posted since I initiated the thread.
    If you did that you will notice that installer couldn't access to a port . How can I grant it access to that port?
    Incidentally, Would you mind telling me what the benefit of that programme is? I am expected that programme converts any  file format into a PDF format

Maybe you are looking for